CLS2001_97124

How that "e" get in there.... my bad.. :o


It is "Central Dr."


15070 NW Central Dr. Apt #507
Portland OR, 97229

You can address the mail to me. Brian

evilstorm

I need friggin headers so bad, i dont know what to do!

cmark

i'm in the same boat brotha!!! if you find some decent priced ones, gimme a holla!!

mrsteve

iTrader: (1)

^ HAHA only if I don't find them 1st! I came so close on getting a set this week but another guy beat me to it. I'm desperate for some CT's. I'm about to pay the full price from CT

Jonesi

Dumbass...! Shoulda got in on the GB and paid $960... I did..

evilstorm

Didnt have the money then, now im itching for a new mod.. want i/h for this spring

360

Hey so whats the price if we have 30 people or more, and how long after we order will we get these if we place the order? one more question do they need to be reprogamed if we dont have headers and then get them after the chip, do they need to be remapped or is it automatic? I'm getting very close joining the buy, (i'm so weak)

Jonesi

That's a good question we haven't got a definitive answer on when the final product will be finished..

The chip will be setup for your future mods and you won't have to have anything reprogrammed but the more mods the more you'll get out of them with the chip.

evilstorm

any break with 30 peeps?

Jonesi

At 30 people we'll be around $675......!

phipark

Jack has already stated that 30 people would be 15% discount, which I believe would make it around $675.

Jonesi

Too sloooooow...!

CLS2001_97124

Jonesi, I will keep you updated with who's paid, so in term you can update the list? Sound good to you?

ChadT

I wonder if it would be possible to get in on the group buy for the 6 speed chip to get the price but then just have to wait until we can get one up there or get it programed somewhere.

AuCLSman

ok - count me in , will send check and personal info to po box
thanx for your efforts on this.
frank

CLS2001_97124

Good point ChadT. Wanna give Jack a call?

Jonesi

Perfect...! I'll send you a PM with my email address so we don't clutter this thread up

Look at all these people jumping in on it now...!

ChadT

Is his number in this thread somewhere? If not can you send it via PM?

Jonesi

Jack Friedman, General Manager
Unichip of North America
www.unichip.us
Toll free 1.866.643.7400
Local 1.503.6407465
Fax 1.503.214.6444

Chaptorial

2 more people have jumped on. We need a list update.

CLS2001_97124

btw. My last name is King. For those who want to address it to me. Otherwise, just the address will still get mail delivered I think.

Jonesi

I know. I know. I've worked 60+ hours each week the past 6 weeks so I'm a little behind.. I'll do it tonight though, if I ever get out of here....

phipark

j/k Keep up the good work.

Jonesi

:pfawk: :P

Chaptorial

Yeah i didn't mean right now, just whenever you have free time.

ChadT

I'm in!!!!!!!!!! Talked to Jack he says the 6-speed chip is good to go!!!!!!!!! He says he just really wants to get a 6-speed on the dyno because he can get better HP#s out of a 6-speed. He said the harness will work just that some of the plugs for the auto won't be used. Good news!!! Some bad news though. He says since the 6-speed chip is basically the same map as the auto he won't do a free chip but he said he'll give someone a great deal on it if he can dyno their car. So the 6-speeders have been golden all along.

Jonesi

Can someone contact Jack and find out if we should include the 6-speeders in the GB and see if the numbers count or if they're just going to get it at the same price.. If we can include the 6 speeds we may hit 40..

ChadT

I just talked to him. He said we are in no problem. I'm, so excited!!!!! We are in on the group buy and the same unit works on the 6 speed. I asked him several times to make sure but it can't hurt to confirm. Man he loves to talk about his product. Very cool guy IMO. He says we have been in all along. I told him that nobody thought the 6-speed was ready he said that was totally false and to get in on it. The map is the same. The auto just has a couple more plugs for the tranny control.

Jonesi

That's some awesome news for all of us...!

CLS2001_97124

Lets not jump the gun on this. I know its awsome that 6-speed can use the chip. But lets give scalbert a chance to respond. If I remember correctly. He pointed out in the past that the pin configuration was not the same at all, and it would require a different plug for the 6-speed folks based on his experience with E-Manage. I could be completely wrong, but its better to be safe than sorry.

Just my 2 cents.

Ant7701

I know the ecu connectors on the 6 speed and the auto are NOT the same...however the unichip won't be using all 4 connectors on the ecu...just one. So that connector may be the same for 6 speeders considering all the sensors that have to be tapped into are the same. Not 100% sure but pretty much so.

blader

Somebody PM scalbert .. but if its true that the 6 speed would work, we'll be close to 40 people on this buy wont we?

Ant7701

Yo...what do we do. Do we write down on a seperate piece of paper all of the info that Jack needs like name, address, phone, etc...and mail it with the money order or do we just mail the money order and sent Brain a PM w/ that info???

mykemcnasty2

if the GB is 40, whats the price at?

NJTypeS

Thats what I did. I just enclosed a separate piece of paper with my check listing the type of car, modifications, address, screen name, and phone #.

CLS2001_97124

^^^

Thats exactly what everyone should do.

Jonesi

IN
1. Jonesi
2. Typer
3. Nitin
4. power3dfx
5. mattg
6. Ant7701
7. Chaptorial
8. Mr. Hyde
9. Seattle CL-S
10. kHmER Co
11. Phipark
12. 3.2 Type-S 03
13. withoutcomp1
14. mc222
15. blader
16. ChinozTL
17. AzzKiker23
18. Flint
19. MrSteve
20. MRIGuru
21. dj5
22. Sonor Kid
23. jet-tek
24. jgscott
25. Darrinb
26. Juice
27. NJTypeS
28. derelict
29. AuCLSman

MAYBE
1. mykenmcnasty
2. R10Apple (Strong Maybe)
3. pmptx (Strong Maybe)
4. vandy786 (Strong Maybe)
5. SatinSilverTypS (Strong Maybe)
6. Ferizzo
7. EvilStorm
8. 360
9. jcheung7
10. BC
11. cmark

6-Speed (Once 6spd version is ready)
1. JaDia
2. Chad T
3. DHRJDMBA
4. J.T.’s 3.2TL
5. CC Type S
6. NiteQwill
7. Musclehead
8. Jimmbbo
9. Manic
10. 03typeS6spd

Jonesi

How you like dem apples....!

Jonesi

I'm way too busy at work at the moment would someone be able to PM all the people on the "In' list and let them know the PO Box?

And also I'd like for us to hit the 30 mark so if someone could PM the "Maybes" and find out their status..?

blader

If the 6spd thing is true and the harness will work that will make 39 on the IN list .. boy would that be a nice discount