*** Official Uni-Chip Group Buy ***
#1
Revving at 9K...
Thread Starter
*** Official Uni-Chip Group Buy ***
Okay guys, this is it. Now that we got the result of from the E-Manage for the NA cars, we can get this ball rolling again for the Uni-Chip Group Buy.
Can the MODS make this a sticky?
===============================
Before you consider this mod, here are some of the info that have been already discussed on this forum.
Email from UniChip
Original Dyno with some Driving impressions
Official UniChip Dyno Chart Thank you scalber for this one.
E-Manage for NA result
================================
Here's the latest Email Jack from UniChip sent me. (2/09/04)
Brian,
Thanks for the e-mail; I certainly understand the delays but getting there in the end is all that matters.
We're certainly interested in the NOS car... as we discussed, we can directly control the NOS through the Unichip and provide an integrated NOS/fuel/timing solution which works very nicely.
We also won't have any issues with the 3.5L conversion... we can optimize any parts which mechanically fit on the engine. I doubt the kit hardware will change at all with the larger displacement, but the maps certainly will and if guys want to buy pre-programmed kits we'll obviously have to see one of the cars.
Yes, the deposit is still $100 which is fully refundable should we fail to provide a functional kit.
We have submitted the prototype build sheet to our manufacturing guys and are awaiting their estimate. Please let me know if I can provide any additional answers about the CL project.
I also need to see your S2000 if at all possible. I know you wanted to wait until the aftercooler was installed, but I'd like to see it either way as quickly as possible to ensure our harness configuration for the car is correct. Let me know.
Cheers,
Jack
Jack Friedman, General Manager
Unichip of North America
www.unichip.us
Toll Free 866.643.7400; 503.640.7465
Mattg, and TypeR, take out your calanders, lets put you guys in touch with them for a tuning session. ![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
So here is the deal. I'm not trying to twist anyone's arms to get this, but I will take the responsibility to collect and give the money to uni-chip when we have 20 people for the group buy.
contact me via email.. my box here get full really fast. I created an address just for this.
gt_guy123@yahoo.com
Since most of you don't know me, excpet for a few WestCoast guys, I completely understand not wanting to send money to a stranger. Therefore, I think if you send me a bank issued check made out to "UniChip" would be the best bet. Or we can make other arrangements if needed.![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
As for the 6 speed people, I think cls6sp03 was going to do something with UniChip, but I don't know where we are with it. So if we can get a 6 speed here, they will get a chip for yours also.
Again, please post here if you are serious buyer, and also let your TL buddies know about it, so we can make this group buy a success.
Can the MODS make this a sticky?
===============================
Before you consider this mod, here are some of the info that have been already discussed on this forum.
Email from UniChip
Original Dyno with some Driving impressions
Official UniChip Dyno Chart Thank you scalber for this one.
E-Manage for NA result
================================
Here's the latest Email Jack from UniChip sent me. (2/09/04)
Brian,
Thanks for the e-mail; I certainly understand the delays but getting there in the end is all that matters.
We're certainly interested in the NOS car... as we discussed, we can directly control the NOS through the Unichip and provide an integrated NOS/fuel/timing solution which works very nicely.
We also won't have any issues with the 3.5L conversion... we can optimize any parts which mechanically fit on the engine. I doubt the kit hardware will change at all with the larger displacement, but the maps certainly will and if guys want to buy pre-programmed kits we'll obviously have to see one of the cars.
Yes, the deposit is still $100 which is fully refundable should we fail to provide a functional kit.
We have submitted the prototype build sheet to our manufacturing guys and are awaiting their estimate. Please let me know if I can provide any additional answers about the CL project.
I also need to see your S2000 if at all possible. I know you wanted to wait until the aftercooler was installed, but I'd like to see it either way as quickly as possible to ensure our harness configuration for the car is correct. Let me know.
Cheers,
Jack
Jack Friedman, General Manager
Unichip of North America
www.unichip.us
Toll Free 866.643.7400; 503.640.7465
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
So here is the deal. I'm not trying to twist anyone's arms to get this, but I will take the responsibility to collect and give the money to uni-chip when we have 20 people for the group buy.
contact me via email.. my box here get full really fast. I created an address just for this.
gt_guy123@yahoo.com
Since most of you don't know me, excpet for a few WestCoast guys, I completely understand not wanting to send money to a stranger. Therefore, I think if you send me a bank issued check made out to "UniChip" would be the best bet. Or we can make other arrangements if needed.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
As for the 6 speed people, I think cls6sp03 was going to do something with UniChip, but I don't know where we are with it. So if we can get a 6 speed here, they will get a chip for yours also.
Again, please post here if you are serious buyer, and also let your TL buddies know about it, so we can make this group buy a success.
![Cheers](https://acurazine.com/forums/images/smilies/cheers.gif)
#2
Senior Moderator
I'm in for sure 100%....! I'm sure you don't want to give everyone your personal address so where would you like the money sent?
We need 20 people to get a good deal and to have them make the PnP harness so lets get this going ASAP........!!!
Edit: Did you get a ballpark cost for the chip with PnP, if we get 20 people ?
We need 20 people to get a good deal and to have them make the PnP harness so lets get this going ASAP........!!!
Edit: Did you get a ballpark cost for the chip with PnP, if we get 20 people ?
#3
Revving at 9K...
Thread Starter
One last thing. Please keep this thread clean for people who want to buy this chip. We already have enough threads about why people don't want it, and why they don't want it. Because I'm going to do my best on keeping the GB list as updated as possible so everyone can see where we stand.
#5
lover and fighter
Edit: Did you get a ballpark cost for the chip with PnP, if we get 20 people ?
![Hijack](https://acurazine.com/forums/images/smilies/hijack.gif)
#6
Revving at 9K...
Thread Starter
No problem r10apple.
However I'm not too sure I understand what you mean about another dyno plot post. To my knowledge there is only 2. One from the dyno shop, and the other with tq curve from uni-chip.
Sorry for not posting the price. I tried to edit, but it was too late.
The price of unit is between: $700-750.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
However I'm not too sure I understand what you mean about another dyno plot post. To my knowledge there is only 2. One from the dyno shop, and the other with tq curve from uni-chip.
Sorry for not posting the price. I tried to edit, but it was too late.
The price of unit is between: $700-750.
Trending Topics
#8
lover and fighter
However I'm not too sure I understand what you mean about another dyno plot post. To my knowledge there is only 2. One from the dyno shop, and the other with tq curve from uni-chip.
#12
Revving at 9K...
Thread Starter
Originally posted by CT3.2
Will it work for a CLP?
Will it work for a CLP?
But in all honesty, if you want the chip, why didn't you get the Type S??!!
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Call them and find out.. the 800 number is there.
#14
Senior Moderator
Originally posted by CLS2001_97124
I don't think so, I think a tuning for it will be needed also.
But in all honesty, if you want the chip, why didn't you get the Type S??!!
j/k..
Call them and find out.. the 800 number is there.
I don't think so, I think a tuning for it will be needed also.
But in all honesty, if you want the chip, why didn't you get the Type S??!!
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Call them and find out.. the 800 number is there.
#15
Revving at 9K...
Thread Starter
![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
TypeR, you coming to Oregon anytime soon?
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
But seriously, you should contact Jack at UniChip, maybe work something out for your 3.5 liter beast.
#18
Senior Moderator
Originally posted by Nitin
Does the estimated price of $700-$750 include the PnP harness, or will that cost us extra?
Does the estimated price of $700-$750 include the PnP harness, or will that cost us extra?
#24
Senior Moderator
Originally posted by darrinb
damn this is turning out to be more expensive than i thought how big is the chip and how long is the install??
damn this is turning out to be more expensive than i thought how big is the chip and how long is the install??
#25
Sweet as Gold
Originally posted by CLS2001_97124
No problem r10apple.
However I'm not too sure I understand what you mean about another dyno plot post. To my knowledge there is only 2. One from the dyno shop, and the other with tq curve from uni-chip.
Sorry for not posting the price. I tried to edit, but it was too late.
The price of unit is between: $700-750.
No problem r10apple.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
However I'm not too sure I understand what you mean about another dyno plot post. To my knowledge there is only 2. One from the dyno shop, and the other with tq curve from uni-chip.
Sorry for not posting the price. I tried to edit, but it was too late.
The price of unit is between: $700-750.
Do we still have to take our car to a Uni-chip deealer for them to install or can we do it ourselves being that it will be P+P. Also if we have to take it to them...do we have to pay more for the installation. I'm saying this cause the price is a little higher than expected and don't want to be like $800-$850 w/ installation. sorry for somewhat changing the subject but this is a lot of cash we're talking about.
#36
Senior Moderator
Originally posted by Ant7701
CAN WE GET SOME SOLID ANSWERS PLEASE!!!!!!!!!!!!!!!
CAN WE GET SOME SOLID ANSWERS PLEASE!!!!!!!!!!!!!!!
#38
Senior Moderator
Originally posted by ga2000
what is the hp gains from this chip?????????????????????? just say you just have intake
what is the hp gains from this chip?????????????????????? just say you just have intake
#39
Senior Moderator
Originally posted by 01 Cl-s
if I want to buy this chip later on in the year will it be possible for me to get it still with the PnP harness. I would expect to spend more but will it still be available?
if I want to buy this chip later on in the year will it be possible for me to get it still with the PnP harness. I would expect to spend more but will it still be available?
#40
Senior Moderator
Originally posted by juice
I really want to be in. Do you think the price will drop any if we get 20 people? But, I may be in anyway. When will we know the time fran from UniChip.
I really want to be in. Do you think the price will drop any if we get 20 people? But, I may be in anyway. When will we know the time fran from UniChip.