CCType-S

So, how many people do we have at this point.

Seattle Cl-S

Count me in 100% @ $700-750 w/ PnP. I'm due for a mod. I don't have an exhaust but plan to in the future. Should I just get the I/H/E programming then? I can't see how the exhaust makes much of a difference anyway. Need a deposit? I think we have 10 people now...

In case we don't have 20 people, how much will it cost? I may be interested anyway. After all, I paid $1200 for my headers way back in the day. $700 for 5-15 hp across the whole range ain't too shabby.

Ant7701

Yeah man try and get it for $700...at the rate we're going we'll have 20 members no problem.

Jonesi

It defineltey picked up.. We should have around 15 yes/maybe 's, if not a few more so far. The more people the better are bargaining power becomes..

ChadT

You can put me down as a maybe. I'll get it eventually for sure. When we find out how long it will take I can make a firm decision. If it's going to be a few months then I can do it. I need some time to recover from the header purchase.

NSX-Tuner

Yes, but after I get the SC installed and if Jack (Unichip) and Shad (CompTech) can workout the integration issues with the SC and Unichip.

juice

Very important question!!!!


Doesn't Acura change the ECU if you get your tranny changed?

Will this affect anything?

Does the car that this was tested on still have it's first tranny?

Just want to make sure that this will work no matter what ECU we have.

mattg

it will work no matter if you have the original or replacement ecu.

if you have to go in for a new tranny, just unplug the unichip then plug it back in when you get your car back.

darrinb

i'll let u guys kn ow if i'm in, i might have some thin else up my sleeve

Chaptorial

Nice.

kHmER Co

im in for sure, price could be worked on.. and it must be PnP

Jonesi

IN

1. Jonesi
2. Typer
3. Nitin
4. ChucksTL
5. power3dfx
6. mattg
7. Ant7701
8. Chaptorial
9. Mr. Hyde
10. Seattle Cl-S
11. kHmER Co

MAYBE

1. Darrin
2. Juice
3. JaDia (Once 6spd version is ready)
4. mykenmcnasty
5. Phipark
6. CC Type S
7. Chopper
8. Chad T
9. dj5

Jonesi

Right there is 20 people if everyone was 100% in.. We need some more support from the A-TL site... Mr. Hyde can you do anything? We also need some more support here, so spread the word.

phipark

Ok, I was sleeping on it last night and count me in as a definite.

Jonesi

Great News..! That makes 12..

DHRJDMBA

I have a 6 speed. Are you keeping track of people with "3 pedals" that want in???? I would be willing to put up the $100, but want to know who is local and going to let Unichip use their car to create the proper chip?????

Jonesi

We don't have any volunteers yet to go up.. cls6sp03 is going to go up but only with his SC on, so I'm not sure if they can do anything. You and JaDia are two 6speeders waiting for the chip for it.

Jonesi

This is the info we need.. If there are a bunch of 6speeders waitng, please let us know. This helps create a demand for the product.

CCType-S

Hey, you forget about me.

Jonesi

I have you as a maybe.. Are you also waiting for the 6speed chip?

CCType-S

If it's take a few months then I'm in for sure.

DHRJDMBA

I will keep checking the thread - I have no issue putting up the $, but I am in FL I really cannot bring the car out there for them to prepare the proper mapping etc.

We need more 6 speed interest!

Jonesi

AGREED 100%...! We need a volunteer...!

r10apple

Ima strong maybe as well...

ferizzo

Good Luck guys! I want in but after the wedding still recovering and my wife most certainly does not agree with me getting more mods (we've had this conversation already). I'll keep my eyes open though...more reason to get a weekend job!

Jonesi

Added you to the "maybe" list... Please try and get some of the A-TL guys on this if you can..

Come on Ferizzo you can sneak this one in..!

lol @ rehela lol

CLS2001_97124

Wow,

Nice turn out already since I left work yesterday.

Nice job Jonesi! Thanks for keep this updated with people's questions.

My plan for payment collection is as follow, please make other suggestions if you can accomdate.

I will setup a PO Box just for this GB, so everyone can get a bank issued check made out to Uni-Chip instead of me. Once I have 20 checks in hand, I will take a trip over to UniChip Office and hand it to them directly, and have Jack write me a receipt for the entire GroupBuy. Then I will scan it, and post it on this thread.

For those wants to use Credit Cards, I obviously can't handle that short of going through paypal, but lets work that out on a 1 on 1 bases, so I can provide you with the proper document to show you have paid me, and it's used for UniChip down payment. Keep in mind that I will not cover that (I think) 3% charge from using paypal, therefore, when you make the payment to me, you need to include that first.

Again, Jonesi, thank you for all your help with this, and I can just leave the job of keeping a current up to date list of people who are in?

CLS2001_97124

The eta, is when we are close on completing this group buy.. I'd say once we hit 15 that is 100% sure, then I will get the PO Box setup, and start to collect the down payment.

With the Uni-Chip, you will not need the VAFC, but you can always keep it for looks, as the tune potential is much greatly on the Uni-Chip, therefore you would have to pull out any tuning you might have done on the VAFC.

But officially, from UniChip, you should just remove it. At least that is what they told me about my VAFC on the S2000.

vandy786_RENAMED

Count me in as a maybe.

Jonesi

Yes I have a list saved.. And no problem b/c I want to get this thing going..

Jonesi

Brian, You have a email at the email address you set-up..

CLS2001_97124

Scott,

Left you a VM on your Cell.

Jonesi

His was just posted on the TL site:

"If we can put together a descent size group, including both CL members and TL members, of 30 or so... We could be looking at a discount around 75.00 - 80.00 dollars, depending on how many commit. Commitment requires a 100.00 deposit to initiate the process. This money is refundable if he fails to produce the product, "this is for your peace of mind"

The member willing to take his car to Jack's location in Hillsboro, Portland, will probably get his/hers chip for FREE and help properly tune the chip for the TL (four or five speed). "

This would go for the CLS6speed, we need someone to make it up there.. But overall if we can get 30+ people we could get a 75-80 discount.. Keep working on this guys..!

power3dfx

Remember also that if we get this many people this will put the chip in the mid 600 range which is much better.
I am ready to put in deposit, so keep us posted on what to do and when its needed. Jonesi, keep up the good work!

CCType-S

How long does it take to how Jack to tune the chip for our 6 speeders.

txaggie

I have a 6-speed in Seattle. I might be persuaded to journey down to Portland. How long would they need the car? Would I get a break in price? The car is bone stock....do I need headers or other mods?

Jonesi

I believe CLS2001 left it there for a few days only b/c he has his S2000 to cruise in.. I do believe they would need one with H/I to be able to fine tune it..

CLS2001_97124

Hmm..

Headers and intake is prefered.. since most people who want the chip probably already has those mods.. but we can try?

But about the timing.. they had my car for 1 week. So, you have to be able to give it up for that time. But in return, you will get a free chip.

CLS2001_97124

Jonesi, you are good.. you beat me to it again..

btw, you going to call me back?

Also, could I get some inputs/feedback for my payment suggestion?? I'm all ears.

Jonesi

I say we speak with UniChip and see if they will take deposits rather then putting you in the middle.. And this way they could accept credit cards etc.. I would hate to be in your position collecting thousands all in checks etc.. Lets wait til we get a little closer..

Edit: Sorry Xtrmely busy at work.. I'll call you a little later on, if that's cool.