Jonesi

Sweet..! Done...

phipark

What people need to understand that only an initial deposit is due immediately to start production and the remaining amount due in a month or two. Maybe some people are thinking they need to start forking out $6-700 right away.

Just my $.02

blader

If someone could get their 6MT to these guys to test, we'd be well into the mid 20s

I'd definetly be happy if we could make it 600\650 with 30 people!

Jonesi

Yes, we are at 23 including people with "Strong Maybe"..

We have atleast 7 people looking for the 6-speed version.. I created a thread in Car Talk asking for a volunteer and having been bumping it for about a week without anyone volunteering. I've done the best I can and I'll keep adding people as interested but that's the best I can do. I'll leave it up to the 6 speeders to get it going..

Chaptorial

Is that really how its gonna look? Sweet.

Anyone have a general idea where the harness will sit in the engine bay?

blader

HUH? I thought our ECU was in the cabin

J.T.'s 3.2CL

I'm guessing it will go by the passenger side kickpanel since that's where the ECU is located.....Just a guess though.:P

Ogolden1

...Guess, is right! It is actual down under the radio console, on the tranny "hump" close to the firewall - you pull the carpet back from both sides to access the mounting bolts and wire harnesses.

CLS2001_97124

Ding!

It sits right next to our stock ECU.

Getting very close. I'm looking into getting the PO box setup next week.

Chaptorial

OK my bad.

I started the a bit early tonight.

juice

When will the price be finalized? Or do we need to imform them of how many people we are going to have first?

Jonesi

Ant7701

lets shoot and hold out til we get 30!!Its only been on for like 5 days and we got like 16 so lets hold out for a little bit longer I'm sure everyone wouldn't mind saving some cash!

J.T.'s 3.2CL

I totally agree. Even if we can't get more people at least we can say we tried.

musclehead

I'm in San Francisco.

darrinb

what type of tools are needed for the install

flint

iTrader: (2)

Sign me up....I'm in.

blader

I agree with Ant and JT .. lets hold out for a while for 30. A price in the 600's would definetly make my wallet happy and will give me time to save for the final payment.

BTW, I think flint makes 18?

Ant7701

A flashlight to see what ur doing and a 10mm wrench or socket. Once u pull back the carpet it's right there and if u don't have to remove the stock ecu for anything then you won't need any tools. Just unplug the stock ecu connections and then connect the uni-chip

Jonesi

IN
1. Jonesi
2. Typer
3. Nitin
4. power3dfx
5. mattg
6. Ant7701
7. Chaptorial
8. Mr. Hyde
9. Seattle CL-S
10. kHmER Co
11. Phipark
12. 3.2 Type-S 03
13. withoutcomp1
14. mc222
15. blader
16. ChinozTL
17. AzzKiker23
18. Flint

MAYBE
1. Juice (Strong Maybe)
2. mykenmcnasty
3. Chopper
4. dj5 (Strong Maybe)
5. R10Apple (Strong Maybe)
6. pmptx (Strong Maybe)
7. vandy786
8. SatinSilverTypS (Strong Maybe)
9. Nashua_Night_Hawk
10. Ferizzo
11. MRIGuru (Strong Maybe)

6-Speed
1. JaDia (Once 6spd version is ready)
2. Chad T (Once 6spd version is ready)
3. DHRJDMBA (Once 6spd version is ready)
4. J.T.’s 3.2TL (Once 6spd version is ready)
5. CC Type S (Once 6spd version is ready)
6. NiteQwill (Once 6spd version is ready)
7. Musclehead (Once 6spd version is ready)

TL-P
1. Patrick (Once TLP version is ready)
2. El pana/TL32 (Once TLP version ready)
3. ChucksTL (Once TLP version ready)
4. BlackShadow (Once TLP version ready)
5. CBS (Once TLP version ready)

mrsteve

iTrader: (1)

Scott,

I gotta get headers from somewhere!!! Then I'm in.

mrsteve

iTrader: (1)

Also, Will I be okay with just I/H/Stock Exhaust? I'd hate to spend $500+ on an exhaust for like 2hp. But I suppose if its needed.....

Ant7701

Yeah...no need to get the exhaust. Also u can get this uni-chip w/o even putting in the headers...it will still work fine just maybe no as efficient. And then buy headers. Just my recommendation cause this group buy ain't gonna last forever!!

mrsteve

iTrader: (1)

Scott,

I'm in. Just tell me when and where to send the $100

Jonesi

Good shit Steve...! I'll add you to the list..

Jonesi

We're at 30 with all the Maybe's..! Now if we could get a more definitive answer we'd be in better shape. Either way we're getting close guys.

IN

1. Jonesi
2. Typer
3. Nitin
4. power3dfx
5. mattg
6. Ant7701
7. Chaptorial
8. Mr. Hyde
9. Seattle CL-S
10. kHmER Co
11. Phipark
12. 3.2 Type-S 03
13. withoutcomp1
14. mc222
15. blader
16. ChinozTL
17. AzzKiker23
18. Flint
19. MrSteve

MAYBE

1. Juice (Strong Maybe)
2. mykenmcnasty
3. Chopper
4. dj5 (Strong Maybe)
5. R10Apple (Strong Maybe)
6. pmptx (Strong Maybe)
7. vandy786
8. SatinSilverTypS (Strong Maybe)
9. Nashua_Night_Hawk
10. Ferizzo
11. MRIGuru (Strong Maybe)

CLS2001_97124

mrsteve,

if you want to have exhaust, make sure you go for full cat back.. not just axle back. But the Chip works either way. It just help to enhance your other mods.

Okay, so are we going to wait for more people? If so, lets set a dead line for the GB onces we hit 20 people, that way, this does not get drag out much longer, and people can have there chip buy the summer for the drags.

Jonesi

CLS2001, Could you maybe call UniChip and see what the price breaks may be from 25 and what it would be at 30?

CLS2001_97124

Let me email Jack.

Jonesi

Cool..! I emailed/PM'd the people in the "maybe" column to get some updates to see if anyone else is in..

mrsteve

iTrader: (1)

Don't you have work to do?? HAHA

Jonesi

Defintley...! And it is get this GB set....!

evilstorm

i could be in depending on the money situation at the time of the buy.

Jonesi

Let us know ASAP... The situation is $100 deposit due at the end of the GB. Then once they have a finished product about a month. Then the rest will be due..

Jonesi

Ok, we have 20 people now that MRIGuru went from a maybe to in..!

mrsteve

iTrader: (1)

Sweet! Let's get this rolling then.

Nitin

iTrader: (1)

finally! I really hope nobody on the confirmed list flakes out on us though.

Jonesi

Need 5-10 more.. Hopefully some of the Maybes will become Yes..

mrsteve

iTrader: (1)

Are we trying to get this around the $650-$700 range with the GB?

CLS2001_97124

Yes we are.