AcuraZine Dallas/Ft.Worth Crew
#2361
Three Wheelin'
Oh yea I forgot to add I spotted an acura TSX the other day...It was blue lowered and looked like it was on Volks. I did not get a good view but I was on Legacy turning onto Alma. Looked pretty clean the dude was stuck at the light going west on Legacy.
#2363
Senior Moderator
Regions Leader
Regions Leader
Thread Starter
But anyway I might do a compression test this weekend or something. Its easier and I do not think any issues are with the engine. It could just be as easy as the computer mapping pulling back some timing. But the port match I am just gonna have fun with the dremel after I measure out some stuff. My 3-4 slip is always there now during WOT which is pissing me off so I need to do the delete on the slave cylinder. It would be nice to have a machine but I can strip down the manifold and do it on my own time.
#2367
In Search Of Sunrise....
#2370
Honda+Blue=My garage
5 lugs, 2 bolts and voila, rotors replaced. OK, maybe the 2 phillips are in there, but rotors are about a 15 minute job all around. Ethan is absolutely the right guy when it comes to mechanical on the TL.
#2371
Senior Moderator
Regions Leader
Regions Leader
Thread Starter
Probably just bring it up here to the hanger and knock it out.
I need to repaint my rear calipers as well.
Peter, congrats on the S2000 buddy. Cant wait to drive it.....hehehe
Ive been good, just working. Doing 10 hours a day right now so I pretty much live here at the moment. Tell Jennifer hey for me would ya?
#2374
Chapter Leader (Southern Region)
#2375
Drifting
sure man......Ill let you know when I do it.
Probably just bring it up here to the hanger and knock it out.
I need to repaint my rear calipers as well.
Peter, congrats on the S2000 buddy. Cant wait to drive it.....hehehe
Ive been good, just working. Doing 10 hours a day right now so I pretty much live here at the moment. Tell Jennifer hey for me would ya?
Probably just bring it up here to the hanger and knock it out.
I need to repaint my rear calipers as well.
Peter, congrats on the S2000 buddy. Cant wait to drive it.....hehehe
Ive been good, just working. Doing 10 hours a day right now so I pretty much live here at the moment. Tell Jennifer hey for me would ya?
#2376
Three Wheelin'
#2377
Chapter Leader (Southern Region)
#2378
Senior Moderator
Regions Leader
Regions Leader
Thread Starter
I need help in a "Im too lazy to do all four of them" way
Ive done rotors on alot of our members cars. Hell I would say Ive done alot of the mods our OG members currently have on their rides
#2379
Safety Car
^^ Sounds like me. I had severe fade after doing my 1000 mile cruise in 3 days through the hill country after a long fast stop. Had my back brakes smoking. Now my brakes are a bit mushy, and not as responsive. I need to bleed my brakes, and sand the pads down to get rid of the glaze, just too lazy to do it!
#2381
Honda+Blue=My garage
sure man......Ill let you know when I do it.
Probably just bring it up here to the hanger and knock it out.
I need to repaint my rear calipers as well.
Peter, congrats on the S2000 buddy. Cant wait to drive it.....hehehe
Ive been good, just working. Doing 10 hours a day right now so I pretty much live here at the moment. Tell Jennifer hey for me would ya?
Probably just bring it up here to the hanger and knock it out.
I need to repaint my rear calipers as well.
Peter, congrats on the S2000 buddy. Cant wait to drive it.....hehehe
Ive been good, just working. Doing 10 hours a day right now so I pretty much live here at the moment. Tell Jennifer hey for me would ya?
#2382
Three Wheelin'
I know. As I recall you had lines also. Its not fun doing that by yourself lol.
#2383
As a side note fellas, Cars & Coffee is postponed until Feb 6th.
#2386
Three Wheelin'
For sure I might be free next saturday or something. Doesn't seem I have anything planned. If this weekend doesn't suck might try this weekend and that sucks about c/c.
#2387
Lead Footed
Boy . . . I sure could use some new brakes myself . . . but I managed to pull together enough coins to get me some new axles, flex pipe, O2 extender, replacement tube for the CT Icebox and some new tires . . .
Ruf
Ruf
#2388
Honda+Blue=My garage
what a great idea
S2K rockin in the hizzouse
#2389
Honda+Blue=My garage
I can help you Saturday morning if you want, but we will have to bleed mine out and put some Motul RBF600 in.
#2390
Three Wheelin'
If you want you can have my stock Brembo front rotors if you can somehow make them fit on your 2g. I already cut them down on my buddies brake lathe so they should be good.
#2391
#2393
Lead Footed
yeah, that would be nice . . . oh, and maybe one part maybe in order as well.
Now if I can just get eBay to fix my account I can get the axles ordered and I'll be race ready.
S2K
Ruf
#2394
Lead Footed
#2396
Honda+Blue=My garage
#2398
Safety Car
#2399
Senior Moderator
Regions Leader
Regions Leader
Thread Starter
Actually its love field. uhh tomorrow isnt lookin good for me.
I promised my sister Id help hang some stuff in her apartment.
Nelson what I really need help with sooner is my wifes brakes.
I just ordered her rotors and pads for her saab. When they come in can you give me a hand knockin these out? we'll do mine sometime after