BestKeptSecret

iTrader: (1)

would i run into any problem with a 19x9.5 +22 offset wheel?im lowered 1.5inches on tein baisics

n3o

iTrader: (2)

Alright Stillhere, time to push the envelope for serious this time lol.

Questions on Wheels
Wheel Make/Model: Volk GT-V F
Wheel Size (**X**): Front: 19x9.5 Rear: 19x10.5 .
Wheel Offset (+**): Front: +30 Rear: +22
If lowered (amount): 1 Finger gap front and rear.

Now currently I have whatever camber is created by dropping my car that much w/o a kit, I'd say negative 1.5-2 degrees maybe? The fronts I can get a kit if needed. Also need to know what tires I'd have to get. The wheels need some serious repairing (2 have slight bend and all have some scuffing, but they're less then 900 shipped and I love this design so if you think they'll work ima doooo et.

rooki

iTrader: (1)

need to improve ride quality thought about increasing tire thickness and height (in theory more rubber, less bumpy...) looking for any advice on the best tire size

Tire Make/Model: not sure
Width/Sidewall-Diameter (***/**-**): 235/40 or 45/19
If lowered (amount): 1.5" front, 1" back

tires will be mounted on
Wheel Make/Model: Axis Hiro
Wheel Size (**X**): 19x 8.5
Wheel Offset (+**): 35
If lowered (amount): 1.5" front, 1" back

The Duck of Death

Vehicle: 2007 TL Base/17"OEM Wheels

Tire Make/Model: Toyo Observe
Width/Sidewall-Diameter (***/**-**): 205/60 R16
If lowered (amount): Not lowered

I'm looking for some help in finding wheels. I want to run 16" snow tires (I have a few sets) and like to know what 16" wheel would fit on my TL. I am having a little trouble finding (-) sized wheel fitment guides.

Thanks!

d-townhakuzo

Wheel Make/Model: 04 Base Acura TL
Wheel Size (**X**): 18X9
Wheel Offset (+**): +40,38,32
If lowered (amount): Roughly 1.75in.

I wanted to know what offset I'd need and look best, and if the rear would need any rolling of the fenders.

A-Dubbz

Hello,

Got kinda tired reading through pages and pages to see if you answered this so I'm just going to ask you

Will these fit without rubbing?

Wheel Make/Model: RH EVO V7
Wheel Size (**X**):19x8
Wheel Offset (+**):+35
If lowered (amount): Tein Basics ~2"
Transmission (Manual or Auto): AT
Year/Trim (04-07, Base or Type S):06 base
Width/Sidewall-Diameter (***/**-**):235/35-19

chandu

Dose this fit 2007 Acura Tl Base 5spd
Questions on Wheels
Wheel Make/Model:RonJon Legend
Wheel Size (**18**):
Wheel Offset (+32):
If lowered (1.4"):

Tl-Sal

Questions on Wheels
Wheel Make/Model: Sportmaxx 521
Wheel Size (**X**): 18x10
Wheel Offset (+**): +25
If lowered (amount): not lowered

Will these fit without rubbing and how much can i lower my car without rubbing?

stillhere153

iTrader: (1)

roll the rears and throw in a lil negative camber cuz if you got passengers in teh rear it will rub on bumps... alternatively you could just run a 255 series tire and avoid having to run too much negative camber

245/35-19 is fine...

yeah you will have to roll the rear and run negative camber and a tire no bigger than 245/35-19

you will have to max the neg camber in the front, pull the fenders all around and still have to stretch the tires on there... my guess would be a 225/35-19 front and a 235/35-19 rear

try 225/40-19

I have no idea, I dont think they clear the front brakes

18x9 +32 would look awesome... rolled all around

18x9 +38 requires no modification at all

18x9 +40 is pointless

they fit perfect



rear I take it... you will have to roll/run negative camber and stretch a tire to get bellow a 1" drop

A-Dubbz

thanks stillhere153!

Tl-Sal

Quote:
Originally Posted by Tl-Sal
Questions on Wheels
Wheel Make/Model: Sportmaxx 521
Wheel Size (**X**): 18x10
Wheel Offset (+**): +25
If lowered (amount): not lowered

Will these fit without rubbing and how much can i lower my car without rubbing?

rear I take it... you will have to roll/run negative camber and stretch a tire to get bellow a 1" drop

I was actually wanting to do 18x10 with a +25 offset all the way around will that not fit on the front even with like a 235 tire

Tl-Sal

im thinking about doing tein springs too

stillhere153

iTrader: (1)

all around will require bodywork... in the front you will have to pull the front fenders and have them repainted

bb4_vtec

Wheel Make/Model: Volk Racing Te-37
Wheel Size (**X**): 19x8.5 F 19x9.5 R
Wheel Offset (+**): +29 F +34 R
If lowered (amount): 1.25" Tein S. Tech's

The fronts I believe will clear Brembo's what about the rear? I've rolled the fenders already, can I get by with 255/35/19?

stillhere153

iTrader: (1)

you should be ok in the rear if you keep fat chicks away and yes the front clears by a lot

JnC

iTrader: (12)

Questions on Wheels
Wheel Make/Model:SSR GT3
Wheel Size (**X**):19X8.5 front and 19X10 rear
Wheel Offset (+**): +37 all around
If lowered (amount):stock suspension

Would they fit? Tires are 245/40/19 (Front) & 275/35/19 (rear)

rh76

04TL Auto base
Wheel Size:19x8 +40 F; 19x9.5 +40 R
If lowered (amount):1.5"

Which combo would fit better?
235or245/35/19 front
255/35/19 or 265/30/19 rear

thanks in advance!

Acuratl604

thinking about picking this setup up.

Questions on Wheels
Wheel Make/Model: 5Zigen SC3000
Wheel Size (**X**):19x8.5 frt, 19x9.5 rr
Wheel Offset (+**): +35, +43
If lowered (amount): 1.5"

2005 acura tl base auto

Need a spacer?
will i need any?

Acuratl604

sorry for got to add 245/35/19 all around for the above post

Coppin58

Wheel Make/Model: XXR 521
Wheel Size (**X**): 17x7
Wheel Offset (+**): + 38 offset
If lowered (amount): N/A

or

Wheel Make/Model: XXR 521
Wheel Size (**X**): 18x8.5
Wheel Offset (+**): + 40 offset
If lowered (amount): N/A

I'd also need advise on tire size (if these will fit! I hope they will!)

zain22150

iTrader: (1)

Questions on Wheels
Wheel Make/Model: Varrstoen
Wheel Size (**X**): Front: 19x9.5 Rear: 19x9.5 .
Wheel Offset (+**): Front: +22 Rear: +22
If lowered (amount): 1 Finger gap front and rear.

Will it fit brembos on the type s?
and tire recommendations?
thanks a lot

Coppin58

Wheel Make/Model: ROTA G-force
Wheel Size (**X**): 18x8.5 or 18x9
Wheel Offset (+**): + 48 on the 18x8.5 or +30 on the 18x9
If lowered (amount): N/A

Will either of these fit without modifications? Also what tired would I need to run I have a stock 2005 tl automatic transmission! Thanks for the input in advance. I also have the XXR 521's listed up there, any tips on which would look better?!

evilTL

2006 wdp auto
Wheel Make/Model: XXR 522
Wheel Size (**X**): 19x8.5 & 19x10
Wheel Offset (+**): +38 & +42
If lowered (amount): 1.2" on tein
what tires should i run thanks

stillhere153

iTrader: (1)

wheels fit
front tires need 245/35-19
rear tires you need 255/30-19, 265/30-19 if you roll rear fenders

245/35-19 all around
or 245/35-19 front and 255/30-19 rear

those wheels clear the brembos so you are good

18x8.5 +40 fits

you will have to roll and pull fenders all around and stretch a 235/35-19 tire on there

18x8.5 +30 with 235/40-18 all around

they fit

you could run 245/35-19 front and 265/30-19 rear

Coppin58

Thanks for the inout stillinhere with the g-force Rota wheels the 18x8.5 have an offset of +48 would they still fit with no problems? And in your opinion which would look better the xxr 521's or the G-force Rotas? thank you in advance!

krnchunjae

iTrader: (1)

2005 NBP AT
Wheel Make/Model: Enkei rpf1
Wheel Size (**X**): 17x9
Wheel Offset (+**): +45
If lowered (amount): 1.1'' on tein

krnchunjae

iTrader: (1)

+ what tire should I use? 235/40/17...?

stillhere153

iTrader: (1)

in 18" I'd go with the 521 for 2 reasons... 1. price... 2. looks

the gforce in +48 is gonna look good

245/40-17 or 255/40-17

I had that setup in the rear with 255/40-17

Coppin58

Ok, thanks for the input once again! For the Rota's tho would the 18x9 +30 offset fit and look good? Sorry about so many questions I'm just purchasing the Rims within the next week or so and want to get what will look best!

nuttcase21

iTrader: (1)

ok, so i got my volk te37's and they won't fit over my brembo calipers. here's the specs:

2007 KBP TL-s AT
Wheel Make/Model: Volk TE37
Wheel Size (**x**): 19x8.5
Wheel Offset (+**): +43mm
If Lowered Amount: stock height

i test fitted them last night and the fronts hit the brembo's. any advice?

4play

Question on Brembo/Big Brake Clearance and Wheel Clearance
Transmission: (Manual)
Year/Trim: (04-07, Base )
Wheel Make/Model: BBS LM replica
Wheel Size: (19X8.5+35 19X10+45) OR (19x8.5 +15 and 19x9.5 +15)
If lowered: (Slammed)

Im willing to be slightly strecthed on the tires

vtboi4sho

Wheel Make/Model: Work vs-xx
Wheel Size (18x8front 18x9rear):
Wheel Offset (+38):
If lowered (amount):1.5front 1.0rear

I'm sure someone has asked if these will fit on a tsx with any problems, but my computer is really slow to search through all the pages lol. Also, what tire size should I use?

4play

spacer's will fix the problem with the brembos

nuttcase21

iTrader: (1)

i understand that spacers will help, but i'd like to know what the offset needs to be to not need them. thanx.

Coppin58

Sorry me again : / I have a reallly good deal on the ROTA G-force 18x9 +30 offset wheels and just wanna know if they will fir/look good on my '05 TL I have an automatic. I have noticed they fit and look nice on n3o's TL is there any difference??

Acuratl604

thanks for the help!

Blakvrtbeast

iTrader: (1)

BBS LM
18x9+42 up front and in the rear 18x10+50

how would they fit ? will the fronts clear the BBK on an 06 tl 6 speed and how will the fronts and rears sit ? any fender work ?
thanx

BoxOn20s

2005 AM TL AT
Questions on Wheels and Tires
Wheel Make/Model: AME Shallen MX
Wheel Size (**X**):F:19x9, R:19x10
Wheel Offset (+**):+25
Tire Make/Model:Yokohama S.Drive
Width/Sidewall-Diameter (***/**-**):P235/35R19
If lowered (amount): Tein SS all the way down.

I already know that the wheels will fit with some fender rolling but my questions is more towards the tires. I want to minimize the amount of negative camber that I have to run so would I be better off running a P225/35R19 up front and a P235/35R19 in the rear or keep it both P225 or P235 front and rear. Thanks in advance.

gqdabien

2006 TL AT, no Brembos

Questions on Wheels and Tires

Wheel Make/Model: XXR 502
Wheel Size (**X**):F:20X8.5 or 20X7.5, R:20X10
Wheel Offset (+**):+45 or +35, +35
If lowered (amount): Tein S-Techs

What rim width and offset on the front would be best. What size tires to accompany them with least amount of fender mod / spacers.

Thank you so much in advance!

stillhere153

iTrader: (1)

yes that will work

likely needs a 5mm spacer

BUT, here's how you run a test to see which size spacer you need
take a trip to your nearest hardware/autoparts/home depot etc... go to where they have the washers nuts bolts section... you need washers with a big enough hole to fit over your wheel studs... measure the thickness, usually they are around 1mm thick... so obviously you go to your ride... put 3 washers on each wheel stud... then put the wheel on (tape over your caliper saves maint chip)... initially try 3 washers... see if that works... if it still doesnt clear add 2 more... that would put you at needing 5mm spacer... if you need further help just send me a pm


now which offset wont need them, that would be anything bellow 38 for that specific wheel
if you chose the first size you will still be pretty flush and can run some decent sized tires

with the second setup you pretty much have to roll the fenders and run negative camber and of course a tire not bigger than 225 all around

also they both clear the brakes

on a tsx those are perfect 225 tires in the front 235 in the back

rotas are always "really good deal" type of wheels... and they will fit as mentioned before you just need to run 235/40-18 all around

that will not clear the front brembo brakes
the rear fits fine though

definitely 225 up front... and the rear really depends how much of a roll you've done... to minimize the amount of neg camber in the rear you can shave the rear fender... it will weaken your rear 1/4 panel interms of if soemone door dings you it will really be a ding... BUT it will prevent rubbing further

20x8.5 +35 front
20x10 +45 rear