D-100: The Official "Does This Wheel and/or Tire Fit My Car" Thread
#1602
94 DC4 RS LSV/Turbo
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
Thanks stillhere, your such a great help to the a-zine community! Would you mind helping me pick tire sizes now? I would've pm you back but seems like I'm only allowed 1 message in my PM box . I'm not sure if the previous tire sizes that you recommended will work for me since the offset that you suggest and the ones that I acquired are different.
For reference:
18 x 8.5 + 48 front
18 x 9.5 + 38 rears
Greatlly appreciate the time ur taking to help us noobs here!
For reference:
18 x 8.5 + 48 front
18 x 9.5 + 38 rears
Greatlly appreciate the time ur taking to help us noobs here!
run 255/40-18 rear or 255/35-18 rear
i searched the thread but couldn't this info, so any help would be appreciated:
Wheel Make/Model: AME Tracer FS-01
Wheel Size: 18 x 8.5
Wheel Offset: +48
If lowered: Stock, for now
Year/Trim 2005 5AT
if i can recall correctly, someone used to have this same setup a few years back, but just would like confirmation. thanks!
Wheel Make/Model: AME Tracer FS-01
Wheel Size: 18 x 8.5
Wheel Offset: +48
If lowered: Stock, for now
Year/Trim 2005 5AT
if i can recall correctly, someone used to have this same setup a few years back, but just would like confirmation. thanks!
After searching I couldn't find a close enough answer for mine, so thanks in advance!
Questions on Wheels
Wheel Make/Model: HFP 19" PDS-10
Wheel Size (**X**): 19x8
Wheel Offset (+**): +55
If lowered (amount): 1.5"
Question on Brembo/Big Brake Clearance
-2004 TL 6Spd BBK with rims above
Will these rims rub with a 15mm spacer added (if it clears brakes will it rub the fender?) That should take care of the offset but not quite sure if you have a formula above and beyond regular offset/rim width calcs. Would prefer running 245's but will run 235's if needed.
Thanks again.
Questions on Wheels
Wheel Make/Model: HFP 19" PDS-10
Wheel Size (**X**): 19x8
Wheel Offset (+**): +55
If lowered (amount): 1.5"
Question on Brembo/Big Brake Clearance
-2004 TL 6Spd BBK with rims above
Will these rims rub with a 15mm spacer added (if it clears brakes will it rub the fender?) That should take care of the offset but not quite sure if you have a formula above and beyond regular offset/rim width calcs. Would prefer running 245's but will run 235's if needed.
Thanks again.
I have a 07 acura tl type-s (auto). I just purchase some 19X8.5 +35 offset for the front would it cleared the brembo brakes and would you need any spacer for it, if so what is the MM that you would recommend and what tire size?
As for the rear I have some 19X9.5 +35 offset, what do you recommend for tires and if any spacers needed? let me know .....
thanks,
DX
As for the rear I have some 19X9.5 +35 offset, what do you recommend for tires and if any spacers needed? let me know .....
thanks,
DX
sole option is 225/35-19 with fenders rolled and negative camber added
#1605
Hi everyone. I'm looking for a set of winter rims for my 08 tl-s. Anyone know if the rims from an 08 civic si will fit? They are 215/45/17 and I believe the stock si's have a +38m offset
#1606
Racer
I found a few sets of Work VS-XX all with A-Disk and was wondering which was a better fitment or if it fits at all?
First set:
18x8 +33 and 18x9.5 +39
Second set:
18x8 +38 and 18x9 +38
First set:
18x8 +33 and 18x9.5 +39
Second set:
18x8 +38 and 18x9 +38
#1610
Instructor
Questipn will these wheels fit ?
My car is an 05 tl base with navi 5spd auto
Wheels are
Xxr 521
18x8.5 front 18x10 rear
Offset +35 I believe
Tires are
215/40 front
225/40 rear
I'm dropped 2in front and 1.75 rear on h&rs with tokicos and a rear camber kit no rolled fenders or anything
Will these fit without having to roll the fenders ? Or how can I run them not interested incrazy camber in the rear
Thanks
My car is an 05 tl base with navi 5spd auto
Wheels are
Xxr 521
18x8.5 front 18x10 rear
Offset +35 I believe
Tires are
215/40 front
225/40 rear
I'm dropped 2in front and 1.75 rear on h&rs with tokicos and a rear camber kit no rolled fenders or anything
Will these fit without having to roll the fenders ? Or how can I run them not interested incrazy camber in the rear
Thanks
#1613
Racer
Im just worried that the back will stick out with +39 offset with a 9.5 tire width. What tire size would go well with these? I'm guessing 245/40/18 and 255/40/18??
#1616
Racer
#1622
Questions on Wheels
Wheel Make/Model: Work Emotion CR Kai
Wheel Size (18x8.5):
Wheel Offset (+32):
If lowered (amount): Tein H Techs or Eibach Pro-Kit, 1~inch (future)
2004 TL auto.
I know it will fit without spacers but will it rub?
Wheel Make/Model: Work Emotion CR Kai
Wheel Size (18x8.5):
Wheel Offset (+32):
If lowered (amount): Tein H Techs or Eibach Pro-Kit, 1~inch (future)
2004 TL auto.
I know it will fit without spacers but will it rub?
#1624
BANNED
iTrader: (33)
need some help here guys...
looking to upgrade to some nicer wheels/tires this spring.
i've got an 07 tl type s. i'm looking at some 19" wheels, and was wondering what offset you would reccommend for the FRONT and BACK to clear brembos, etc.
wheels are Forgestar F14's 19". d-townhakuzo is running them with fronts at 19x8.5 +34 and the rears are 19x9 +30. his is not a type-s tho, so i'm trying to figure out the best offsets for me.
ALSO, what kind of tire and what size would you recommend for spring/summer/fall?
right now, i just have the stock type-s wheels, theyre 235/45/17, i'm dropped 1" and have 20mm spacers in rear and 15mm in front. the look is PERFECT and FLUSH and looks great. i'll be getting adjustable koni yellow sp3's in the spring as well, to play with the height if i need to.
so, i'm all ears. i'm real confused as to the offsets and tire sizes. i was thinking of sticking with 235/45/19 when i upgrade, because i still want to use the spacers for the flush look, UNLESS wider tires would give me that flush look as well, then i could just sell the spacers or something.
i'll await your guys answers. thanks in advance
looking to upgrade to some nicer wheels/tires this spring.
i've got an 07 tl type s. i'm looking at some 19" wheels, and was wondering what offset you would reccommend for the FRONT and BACK to clear brembos, etc.
wheels are Forgestar F14's 19". d-townhakuzo is running them with fronts at 19x8.5 +34 and the rears are 19x9 +30. his is not a type-s tho, so i'm trying to figure out the best offsets for me.
ALSO, what kind of tire and what size would you recommend for spring/summer/fall?
right now, i just have the stock type-s wheels, theyre 235/45/17, i'm dropped 1" and have 20mm spacers in rear and 15mm in front. the look is PERFECT and FLUSH and looks great. i'll be getting adjustable koni yellow sp3's in the spring as well, to play with the height if i need to.
so, i'm all ears. i'm real confused as to the offsets and tire sizes. i was thinking of sticking with 235/45/19 when i upgrade, because i still want to use the spacers for the flush look, UNLESS wider tires would give me that flush look as well, then i could just sell the spacers or something.
i'll await your guys answers. thanks in advance
#1625
3rd Gear
Join Date: Aug 2010
Location: sayreville NJ
Age: 32
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Questions on Wheels
Wheel Make/Model: Concept One Executive RS-8
Wheel Size 20x8.5)
Wheel Offset (+38):
If lowered (amount): 2f 1.75r or 1.3f 1.2r
2006 TL auto.
Wheel Make/Model: Concept One Executive RS-8
Wheel Size 20x8.5)
Wheel Offset (+38):
If lowered (amount): 2f 1.75r or 1.3f 1.2r
2006 TL auto.
#1626
Questions on Wheels
Wheel Make/Model: Work VS-XX
Wheel Size (**X**): 18x8.5 F & 18x9.5 R
Wheel Offset (+**): +32
If lowered (amount): 2 inches
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 07 type s
Will it clear? I'm looking to buy these this week!
Wheel Make/Model: Work VS-XX
Wheel Size (**X**): 18x8.5 F & 18x9.5 R
Wheel Offset (+**): +32
If lowered (amount): 2 inches
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 07 type s
Will it clear? I'm looking to buy these this week!
#1627
Drifting
need some help here guys...
looking to upgrade to some nicer wheels/tires this spring.
i've got an 07 tl type s. i'm looking at some 19" wheels, and was wondering what offset you would reccommend for the FRONT and BACK to clear brembos, etc.
wheels are Forgestar F14's 19". d-townhakuzo is running them with fronts at 19x8.5 +34 and the rears are 19x9 +30. his is not a type-s tho, so i'm trying to figure out the best offsets for me.
ALSO, what kind of tire and what size would you recommend for spring/summer/fall?
right now, i just have the stock type-s wheels, theyre 235/45/17, i'm dropped 1" and have 20mm spacers in rear and 15mm in front. the look is PERFECT and FLUSH and looks great. i'll be getting adjustable koni yellow sp3's in the spring as well, to play with the height if i need to.
so, i'm all ears. i'm real confused as to the offsets and tire sizes. i was thinking of sticking with 235/45/19 when i upgrade, because i still want to use the spacers for the flush look, UNLESS wider tires would give me that flush look as well, then i could just sell the spacers or something.
i'll await your guys answers. thanks in advance
looking to upgrade to some nicer wheels/tires this spring.
i've got an 07 tl type s. i'm looking at some 19" wheels, and was wondering what offset you would reccommend for the FRONT and BACK to clear brembos, etc.
wheels are Forgestar F14's 19". d-townhakuzo is running them with fronts at 19x8.5 +34 and the rears are 19x9 +30. his is not a type-s tho, so i'm trying to figure out the best offsets for me.
ALSO, what kind of tire and what size would you recommend for spring/summer/fall?
right now, i just have the stock type-s wheels, theyre 235/45/17, i'm dropped 1" and have 20mm spacers in rear and 15mm in front. the look is PERFECT and FLUSH and looks great. i'll be getting adjustable koni yellow sp3's in the spring as well, to play with the height if i need to.
so, i'm all ears. i'm real confused as to the offsets and tire sizes. i was thinking of sticking with 235/45/19 when i upgrade, because i still want to use the spacers for the flush look, UNLESS wider tires would give me that flush look as well, then i could just sell the spacers or something.
i'll await your guys answers. thanks in advance
#1628
Questions on Wheels
Wheel Make/Model: Work VS-XX
Wheel Size (**X**): 18x8.5 F & 18x9.5 R
Wheel Offset (+**): +32
If lowered (amount): 2 inches
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 07 type s
Will it clear? I'm looking to buy these this week!
Wheel Make/Model: Work VS-XX
Wheel Size (**X**): 18x8.5 F & 18x9.5 R
Wheel Offset (+**): +32
If lowered (amount): 2 inches
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 07 type s
Will it clear? I'm looking to buy these this week!
#1629
Questions on Wheels
xxr 521
Wheel Size (18x10all around )
Wheel Offset (+35)
If lowered (on megan coilovers so i can adjust hight)
xxr 521
Wheel Size (18x10all around )
Wheel Offset (+35)
If lowered (on megan coilovers so i can adjust hight)
Last edited by erupt323; 12-08-2010 at 03:33 PM.
#1630
Racer
Questions on Wheels
Wheel Make/Model: Work VS-XX
Wheel Size (**X**): 18x8.5 F & 18x9.5 R
Wheel Offset (+**): +32
If lowered (amount): 2 inches
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 07 type s
Will it clear? I'm looking to buy these this week!
Wheel Make/Model: Work VS-XX
Wheel Size (**X**): 18x8.5 F & 18x9.5 R
Wheel Offset (+**): +32
If lowered (amount): 2 inches
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 07 type s
Will it clear? I'm looking to buy these this week!
I know for a fact that the fronts have to be +35 and no less than that or it wont clear brembos because I've been wanting to buy a set of these for a long time now and can't find ANY at all in 19'. They also have to be in A-Disk and not O-disk or else it won't fit brembos. I'm still not too sure about the offset in the back because it differs when you use 8.5, 9, 9.5 rim width. Personally, I'm looking for the same 8.5 front and 9.5 rear for that staggered look. Good luck hunting!
#1632
The Panty Dropper
Wheel make/model: linea corse dyna
Wheel size: front-19x8.5, rear-19x10
Wheel offset choice one: front +28, rear +43
Wheel offset choice two: front +30, rear +38
Lowering 1.5inches
Question is, which offset will fit my 05 tl base (non-brembo) better? I want to tuck the tire and looking to be as close to flush as possible? I do not want any poke
Wheel size: front-19x8.5, rear-19x10
Wheel offset choice one: front +28, rear +43
Wheel offset choice two: front +30, rear +38
Lowering 1.5inches
Question is, which offset will fit my 05 tl base (non-brembo) better? I want to tuck the tire and looking to be as close to flush as possible? I do not want any poke
#1633
Intermediate
Join Date: Sep 2006
Location: South East Florida
Age: 38
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Wheel make/model: EXE Tenfold
Wheel size: 19x9.5 all around
Wheel offset: +40 all around
Lowered on Tein S.Techs
Car : 08 TL Type-S 6spd
will it : clear the type-s brakes? fit without fender rolling? fit with fitted tires instead of stretched tires?
if not, what are your suggestions for this setup?
Wheel size: 19x9.5 all around
Wheel offset: +40 all around
Lowered on Tein S.Techs
Car : 08 TL Type-S 6spd
will it : clear the type-s brakes? fit without fender rolling? fit with fitted tires instead of stretched tires?
if not, what are your suggestions for this setup?
#1634
Okay guys,
So I blew out my tire last weekend and i dont care cause it was time to replace the treads anyway, so i mind as well get new rims as well. Below is what i want to get, and it seems like +35 offset is the magic spot for the brembos, so here is the scoop. Will these fit on my car and what would you recommend tires for these. I am a conti-freak so i might stay with contis unless i find better. Im thinking 235/40/19s but you guys are the experts what do you think would look nice?
Wheel make/model:MRR Design GT-1 rims
Wheel size: 19x8.5 all around
Wheel offset: +35 all around
Not lowering ride just yet.
Car : 08 TL Type-S Blk/Auto
Also I heard the brembo pads can push the brembo out a little more that can make it more tricky...........hmmmmmmm........any concerns??
So I blew out my tire last weekend and i dont care cause it was time to replace the treads anyway, so i mind as well get new rims as well. Below is what i want to get, and it seems like +35 offset is the magic spot for the brembos, so here is the scoop. Will these fit on my car and what would you recommend tires for these. I am a conti-freak so i might stay with contis unless i find better. Im thinking 235/40/19s but you guys are the experts what do you think would look nice?
Wheel make/model:MRR Design GT-1 rims
Wheel size: 19x8.5 all around
Wheel offset: +35 all around
Not lowering ride just yet.
Car : 08 TL Type-S Blk/Auto
Also I heard the brembo pads can push the brembo out a little more that can make it more tricky...........hmmmmmmm........any concerns??
#1635
Hi All,
I have a 2006 TL, automatic with nav package. Unfortunately, 2 of the wheels are bent and are out of shape due to which my car vibrates a lot. I confirmed that after taking the car to 2 different mechanics and they both asked me to replace the wheels for the vibration to stop.
I am wondering if its possible to repair/rework my current wheels. I wasn't involved in any accident. I think the wheels probably got bent due to the numerous pot-holes on the roads here in central NJ.
Do you guys think it's a good idea to repair the wheels? I googled a bit and found someone who does that, but have no idea how reliable is that. Or should I just get new wheels? Also, I was thinking replacing just the 2 damaged wheels or is it best to replace all 4 even though they are good?
Please pardon my long email . I'm new to the forum so consider me a novice in every aspect.
Thanks in advance.
I have a 2006 TL, automatic with nav package. Unfortunately, 2 of the wheels are bent and are out of shape due to which my car vibrates a lot. I confirmed that after taking the car to 2 different mechanics and they both asked me to replace the wheels for the vibration to stop.
I am wondering if its possible to repair/rework my current wheels. I wasn't involved in any accident. I think the wheels probably got bent due to the numerous pot-holes on the roads here in central NJ.
Do you guys think it's a good idea to repair the wheels? I googled a bit and found someone who does that, but have no idea how reliable is that. Or should I just get new wheels? Also, I was thinking replacing just the 2 damaged wheels or is it best to replace all 4 even though they are good?
Please pardon my long email . I'm new to the forum so consider me a novice in every aspect.
Thanks in advance.
#1638
BANNED
iTrader: (33)
lol...looks like we need someone to fill in for 'stillhere'...
#1640
Instructor
iTrader: (1)
Hi there- thinking of picking these up. since they're concave type i'm trying to figure out the widest I can go in the rear and the lowest offset to show the max amount of concaveness.
thanks for the help.
1.Brand of Rim - forgestar f14
2.Rim size (diameter and width) - 19X8.5 FRONT AND 19X9 rear
3.Offset - 35mm front, 25mm rear
4.Brand of tire -
5.Tire size - 235/35/19 front - looking for suggestions for the rear
6.Drop Type and Amount - Tein S tech, 1.5 inches
7.Will they rub?????
thanks for the help.
1.Brand of Rim - forgestar f14
2.Rim size (diameter and width) - 19X8.5 FRONT AND 19X9 rear
3.Offset - 35mm front, 25mm rear
4.Brand of tire -
5.Tire size - 235/35/19 front - looking for suggestions for the rear
6.Drop Type and Amount - Tein S tech, 1.5 inches
7.Will they rub?????