D-100: The Official "Does This Wheel and/or Tire Fit My Car" Thread
#1801
94 DC4 RS LSV/Turbo
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
MEGA REPLY
too narrow minimum must be 18x8 keep looking, tires are too thin also
215??? no way, 225/45-18 or 225/40-18 would be the narrowest worth going,
they will require a 10mm spacer
good luck
front 225/35-19
rear 255/30-19
needs a 10mm spacer
the newer tl is 5x120
Now the arp stud adapters are the easiest way about this, however with 15mm being the smallest available how would this leave my stance? i would rather not be beyond flush, and would the fronts and rears be staggered? is there an easy way to measure or precalculate this? i really appreciate the help. ohh and do you know a good place to buy the spacers?[/QUOTE]
ebay is the best place to get spacers, but you truly only need slightly longer wheel studs and keep rocking the 5mm spacer you go...
you need 5x114.3 and also that price is PER wheel not all 4
tenzo is correct the local shop doesn't know anything
as mentioned above needs 10mm spacer
19x9 will require like a +25 offset or +30 offset to clear bbk
will not look as concave as 18x9.5 on the other hand
he is 6mt he has the bbk to worry about not the rubbing part
read above you have to take the brembos into consideration when thinking of offsets
no point in getting spacers if the lower offsets are avaiable
again 19x9 +25 good luck
I'd run 235/35-19 just to be on the ideal side, the 245 may rub with fat chick in the back seat
go with the 225
there are nearly no cheap 19" all season tires just an fyi
and the wheel dude's lm reps are pretty much as cheap as it gets, unless you want to run xxr 521 which come in 18 and 20
19x8.5 +35 front with 235/35-19
19x9 +35 rear with 245/35-19
if you don't mind stretching tire
225/35-19 all around
it is fine
might need a roll if you have passengers in the back often if not probably won't rub
no spacers needed run 235/35-19 all around if you are lowered try 225/35-19 front
they will not clear the brembos I beleive they have a +35 offset that should clear tires are fine btw
stagger is for looks
non stagger is for better ride feel
no worries you are good
wtf are you talking about he got the appropriate tires
I will some day make a chart lol
according the your vehicle (07 base non s) you do not have brembo brakes so the above setup works fine
do the 10 since you are dropped don't want you to rub
the 15mm will require a slight fender roll and it will be mildly poking
would require 225/45-17
need a +35 offset
i would do toyo proxes 4
for the tpms you just need a competent tire shop that will not damage your sensors the sensors require no programming so long as the shop doesnt damage them you will be good to go within 5mile drive
my boy egonz is running those here he went with 225/40-18
you need atleast a 18x8 wheel
see the image above and the rear fitment will require you to stretch a 235/40-18 tire and roll the fenders
you will need the 18x9 +25 and run 225/40-18 tire
that tire fits assuming you are putting on stock wheel
245/30-20 front
265/30-20 rear
19x8 is the minimum
will need a 25mm ATLEAST to clear the brembos
as you saw in the pics the tires are too thick for that setup it would require a 215 for future refference
tires are supposed to be 245/30-20
murph145 is correct you will have to run 235/35-19
they will but you will have to run 225/35-19
the problem is your tire specs the tire is too tall
you need 225/35-19
needs 225/40-18
agreed
I think he wants
19x8 +40 (235/35-19)
19x9.5 +40 (255/30-19)
tire sizes added for convenience
Wheel Make/Model: Motegi mr7
Wheel Size (**X**): 18/7.5
Wheel Offset (+**): 45
If lowered (amount): none
Got two different types of tires but both same size
215/35/zr18's two brand new Raptor Rikens and 2 Pirelli Supersport P7000
I don't see why these won't fit but I wanted to ask the experts first.
Wheel Size (**X**): 18/7.5
Wheel Offset (+**): 45
If lowered (amount): none
Got two different types of tires but both same size
215/35/zr18's two brand new Raptor Rikens and 2 Pirelli Supersport P7000
I don't see why these won't fit but I wanted to ask the experts first.
too narrow minimum must be 18x8 keep looking, tires are too thin also
215??? no way, 225/45-18 or 225/40-18 would be the narrowest worth going,
Hi I want the Tenzo Concept_9 19 "x 8.5" + 45 offset for my acura tl-s 2008. are you sure The Wheels Clear the brembo brakes.thanks
http://www.wheelsnext.com/wheels-tir...-Titanium.html
http://www.wheelsnext.com/wheels-tir...-Titanium.html
Questions on Wheels -- front
Wheel Make/Model: linea corse LC818
Wheel Size (**X**):19x8.5
Wheel Offset (+**): +30
If lowered (amount):1.5"
Questions on Wheels -- rear
Wheel Make/Model: linea corse LC818
Wheel Size (**X**):19x10
Wheel Offset (+**): +38
If lowered (amount):1.5"
Wheel Make/Model: linea corse LC818
Wheel Size (**X**):19x8.5
Wheel Offset (+**): +30
If lowered (amount):1.5"
Questions on Wheels -- rear
Wheel Make/Model: linea corse LC818
Wheel Size (**X**):19x10
Wheel Offset (+**): +38
If lowered (amount):1.5"
rear 255/30-19
Transmission (Manual or Auto): 6mt
Year/Trim (04-07, Base or Type S):08 Type S
Wheel Make/Model: Tenzo R Tracer V
Wheel Size (**X**): 19x8.5
Wheel Offset (+**): 45
lowered:H&R Race Springs.
many websites state these would fit. i tried to order them and the live rep said they would clear the BBK...don't know if thats true or not.. if so why make all websites advise it would clear.?
best tires? looking at yoko s-drives.... 245/19/35's ???
Year/Trim (04-07, Base or Type S):08 Type S
Wheel Make/Model: Tenzo R Tracer V
Wheel Size (**X**): 19x8.5
Wheel Offset (+**): 45
lowered:H&R Race Springs.
many websites state these would fit. i tried to order them and the live rep said they would clear the BBK...don't know if thats true or not.. if so why make all websites advise it would clear.?
best tires? looking at yoko s-drives.... 245/19/35's ???
needs a 10mm spacer
Now the arp stud adapters are the easiest way about this, however with 15mm being the smallest available how would this leave my stance? i would rather not be beyond flush, and would the fronts and rears be staggered? is there an easy way to measure or precalculate this? i really appreciate the help. ohh and do you know a good place to buy the spacers?[/QUOTE]
ebay is the best place to get spacers, but you truly only need slightly longer wheel studs and keep rocking the 5mm spacer you go...
I am interested in getting my bent rims replaced in my 2004 TL. I found this online and wanted to know if this is a good match. Please help me. I am interested in getting rid of my OEM 2004 Rims and going with the OEM from a 2009 TL. Will they work?
http://cgi.ebay.com/ebaymotors/71785...Q5fAccessories
Full set of four (4) wheels from used 2009 Acura TL
Hollander number: 71785
Center caps included. Lug nuts are not included
17x8", 5 lug on 120" 55mm offset
http://cgi.ebay.com/ebaymotors/71785...Q5fAccessories
Full set of four (4) wheels from used 2009 Acura TL
Hollander number: 71785
Center caps included. Lug nuts are not included
17x8", 5 lug on 120" 55mm offset
tenzo is correct the local shop doesn't know anything
as mentioned above needs 10mm spacer
If I wanted to run a concave wheel... would a 18x9.5 look or be as deep as a 19x9 wheel?
Also, if I wanted to run something like 235s all around and be flush with the fender what offset should I go for the 19s?
20, 37 or 42? (the 18x9.5 only come in a 30).
I'm not interested in running different offsets for front/rear unless I really need to.
Also, what sort of spacers would I need to run if any?
Thanks in advance
Also, if I wanted to run something like 235s all around and be flush with the fender what offset should I go for the 19s?
20, 37 or 42? (the 18x9.5 only come in a 30).
I'm not interested in running different offsets for front/rear unless I really need to.
Also, what sort of spacers would I need to run if any?
Thanks in advance
19x9 will require like a +25 offset or +30 offset to clear bbk
will not look as concave as 18x9.5 on the other hand
Everything equal the 18x9.5 will be more concave. If your offset choices are as you listed for the 19s you should get the 37 if you don't want to modify your fenders. Then you wouldn't need Spacers and it would be pretty flush. The 18x9.5s with a 30mm offset will be close to rubbing with a 235 tire depending on how low you go. I have 18x9.5 33mm offset and don't rub on the a spec suspension.
So the 18x9.5 is deeper than the 19x9?
So, from my observation, the lower the offset is from 45 [which is stock I think?] the closer it goes to the fender?
I don't mind doing rolling my fenders. Not sure about pulling them and such.
I'm currently dropped on Tokico Blues+Tein S-Techs. I may go lower in the future to about a 1 finger gap drop.
So, from my observation, the lower the offset is from 45 [which is stock I think?] the closer it goes to the fender?
I don't mind doing rolling my fenders. Not sure about pulling them and such.
I'm currently dropped on Tokico Blues+Tein S-Techs. I may go lower in the future to about a 1 finger gap drop.
You are correct about the offset. If the offsets on the wheels are the same the 9.5 should be deeper. I think you will be happy with the 37mm offset. 20mm will stick put pretty far and you will at least need to do serious fender rolling (not sure about pulling) especially if you are going lower. If you end up wanting more width you can get 15mm Spacers to get to a 22mm offset but if you go with the 20mm wheelcypu can't really go the other way
no point in getting spacers if the lower offsets are avaiable
again 19x9 +25 good luck
Transmission: 6mt
Year/Trim: 04 Base
Wheel Make/Model: 5zigen ZR+520
Wheel Size: 18x8.5
Wheel Offset: 25
Stock for now, planning as much as 1.75-2.0 on coilovers.
I am planning on getting coilovers and a camber kit, and running -1deg camber all around with 0 tow. I am fine with getting my fenders rolled, but won't unless I have to. My question is will I rub with 235/40s, or should I get 225/40s?
Year/Trim: 04 Base
Wheel Make/Model: 5zigen ZR+520
Wheel Size: 18x8.5
Wheel Offset: 25
Stock for now, planning as much as 1.75-2.0 on coilovers.
I am planning on getting coilovers and a camber kit, and running -1deg camber all around with 0 tow. I am fine with getting my fenders rolled, but won't unless I have to. My question is will I rub with 235/40s, or should I get 225/40s?
Questions on Wheels
Wheel Make/Model: bbs lm replicas (do u know of any other web sites other then wheeldudes for a true lm look?)
Wheel Size (**X**): 19 x 9 all around or 19x 8.5f 19x9r
Wheel Offset (+**): ???? best for a flush look or on a daily????
If lowered (amount): 2" drop (any ones you recommand and shocks)
Questions on Tires
Tire Make/Model: ???? best for a flush look or on a daily???? cheap all seasons or just summer tires
Width/Sidewall-Diameter (***/**-**): " ???? "
If lowered (amount):2" drop
will i Need a spacers?
Wheel Make/Model: bbs lm replicas (do u know of any other web sites other then wheeldudes for a true lm look?)
Wheel Size (**X**): 19 x 9 all around or 19x 8.5f 19x9r
Wheel Offset (+**): ???? best for a flush look or on a daily????
If lowered (amount): 2" drop (any ones you recommand and shocks)
Questions on Tires
Tire Make/Model: ???? best for a flush look or on a daily???? cheap all seasons or just summer tires
Width/Sidewall-Diameter (***/**-**): " ???? "
If lowered (amount):2" drop
will i Need a spacers?
and the wheel dude's lm reps are pretty much as cheap as it gets, unless you want to run xxr 521 which come in 18 and 20
19x8.5 +35 front with 235/35-19
19x9 +35 rear with 245/35-19
225/35-19 all around
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S):06 Base
Wheel Make/Model: CE 046
Wheel Size (**X**): 19x8.5 front 19x9.5 rear
Wheel Offset (+**): +35F & +45R
If lowered (amount): 2.0"F & 1.75"R
I have 245/35/19 tires in the rear if I put a 20mm spacer will I need additional fender mod other than rolled fender and will I rim hit fender?
Year/Trim (04-07, Base or Type S):06 Base
Wheel Make/Model: CE 046
Wheel Size (**X**): 19x8.5 front 19x9.5 rear
Wheel Offset (+**): +35F & +45R
If lowered (amount): 2.0"F & 1.75"R
I have 245/35/19 tires in the rear if I put a 20mm spacer will I need additional fender mod other than rolled fender and will I rim hit fender?
Transmission: 6MT
Year/Trim: 08 Type S
Wheel Make/Model: BBS LM-R
Wheel Size: 19x8.5 / 19x9.5
Wheel Offset: +36 / +38
If lowered (amount): zero wheel gap / slight tuck
Questions
-What size spacer should be used for front fitment to clear Brembos?
no spacer needed
-What size Toyo T1R Proxes tires should be used?
235/35-19
-How much fender rolling will be needed?
none
- Would I be better off running 19x8.5 +36 all around?
Year/Trim: 08 Type S
Wheel Make/Model: BBS LM-R
Wheel Size: 19x8.5 / 19x9.5
Wheel Offset: +36 / +38
If lowered (amount): zero wheel gap / slight tuck
Questions
-What size spacer should be used for front fitment to clear Brembos?
no spacer needed
-What size Toyo T1R Proxes tires should be used?
235/35-19
-How much fender rolling will be needed?
none
- Would I be better off running 19x8.5 +36 all around?
non stagger is for better ride feel
Transmission: AT
Year/Trim: 04 Base
Wheel Make/Model: Konig Milligram
Wheel Size: 18x8.5 all around
Wheel Offset: +45 all around
If lowered (amount): none
Tires I just bought along with the wheels: Hankook Ventus evo v12's 235/40/18
I'm pretty sure I read enough that the following will be ok, but since I just placed the order, I want to confirm these will not rub/I will not need spacers or anything. I'm a bit of a newb, so I kind of just want to make sure. Thx!
Year/Trim: 04 Base
Wheel Make/Model: Konig Milligram
Wheel Size: 18x8.5 all around
Wheel Offset: +45 all around
If lowered (amount): none
Tires I just bought along with the wheels: Hankook Ventus evo v12's 235/40/18
I'm pretty sure I read enough that the following will be ok, but since I just placed the order, I want to confirm these will not rub/I will not need spacers or anything. I'm a bit of a newb, so I kind of just want to make sure. Thx!
this thread needs something like this in the first post. a lot easier to understand and quicker to find answers
DISREGARD SIZES AND OFFSETS BELOW, NOT MEANT FOR A TL, JUST USING THIS AS AN EXMPLE
************************************************
16X7: +40. Tire sizes: 205/55-16 to 225-50-16.
16X7.5: +43. Tire Sizes: 225/50-16.
16X8:
16X8.5:
16X9:
17X7: +35 to +60 Tire sizes: 205/45-17 to 225-45-17. (ideal offset is +42 or +43)
17X7.5: +40 to +48 (+35 w/ no drop). Tire sizes: 205/45-17 to 225/45-17. (ideal offset is +42 or +43)
17X8: +35 to +48. Tire sizes: 215/45-17 to 245/45-17. (245/40-17 was used with +40)
17X8.5: +30 offset with 215/45-17 Tire. +40 with a 235/45-17 Tire.
17X9:
18X7: +37 to +45. Tire Sizes: 205/40-18 to 225/40-18. (ideal offset is +42 or +43)
18X7.5: +38 to +48. Tire sizes: 205/40-18 to 225/40-18. (ideal offset is +42 or +43)
18X8: +37 to +48. Tire Sizes: 225/40-18.
18X8.5: +45. Tire sizes: 235/40-18.
18X9: +40. Tire size: 245/40-18 ALSO>> 18x9 +29 offset, 215/45/18 tire
19X7: +40 to +45. Tire sizes: 215/35-19 to 225/35-19.
19X7.5: +43 to +48. Tire Sizes: 215/35-19 to 225/35-19.
19X8: +35 to +47. Tire sizes: 215/35-19 to 235/35-19.
19X8.5:
19X9:
20X7:
20X7.5: +42. Tire Sizes: 225/30-20. NOT LOWERED! Only on '05 and up???
20X8:
20X8.5: +42. Tire Sizes: 225/30-20. NOT LOWERED! Only on '05 and up???
20X9:
************************************************** **
DISREGARD SIZES AND OFFSETS BELOW, NOT MEANT FOR A TL, JUST USING THIS AS AN EXMPLE
************************************************
16X7: +40. Tire sizes: 205/55-16 to 225-50-16.
16X7.5: +43. Tire Sizes: 225/50-16.
16X8:
16X8.5:
16X9:
17X7: +35 to +60 Tire sizes: 205/45-17 to 225-45-17. (ideal offset is +42 or +43)
17X7.5: +40 to +48 (+35 w/ no drop). Tire sizes: 205/45-17 to 225/45-17. (ideal offset is +42 or +43)
17X8: +35 to +48. Tire sizes: 215/45-17 to 245/45-17. (245/40-17 was used with +40)
17X8.5: +30 offset with 215/45-17 Tire. +40 with a 235/45-17 Tire.
17X9:
18X7: +37 to +45. Tire Sizes: 205/40-18 to 225/40-18. (ideal offset is +42 or +43)
18X7.5: +38 to +48. Tire sizes: 205/40-18 to 225/40-18. (ideal offset is +42 or +43)
18X8: +37 to +48. Tire Sizes: 225/40-18.
18X8.5: +45. Tire sizes: 235/40-18.
18X9: +40. Tire size: 245/40-18 ALSO>> 18x9 +29 offset, 215/45/18 tire
19X7: +40 to +45. Tire sizes: 215/35-19 to 225/35-19.
19X7.5: +43 to +48. Tire Sizes: 215/35-19 to 225/35-19.
19X8: +35 to +47. Tire sizes: 215/35-19 to 235/35-19.
19X8.5:
19X9:
20X7:
20X7.5: +42. Tire Sizes: 225/30-20. NOT LOWERED! Only on '05 and up???
20X8:
20X8.5: +42. Tire Sizes: 225/30-20. NOT LOWERED! Only on '05 and up???
20X9:
************************************************** **
I will some day make a chart lol
Questions on Wheels
Wheel Make/Model: Tenzo R Type-M V1
Wheel Size: 19x8.5
Wheel Offset: 45
If lowered (amount): 1"
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): 07 Base
Wheel Make/Model: Tenzo R Type-M V1
Wheel Size: 19x8.5
Wheel Offset: 45
If lowered (amount): 1"
Questions on Tires
Tire Make/Model: Pirelli P-Zero M&S
Width/Sidewall-Diameter: 235/35R19
If lowered (amount): 1"
If i drop it by that amount would i have any problems with the brembo brakes and would there be any rub near the fender?
Wheel Make/Model: Tenzo R Type-M V1
Wheel Size: 19x8.5
Wheel Offset: 45
If lowered (amount): 1"
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): 07 Base
Wheel Make/Model: Tenzo R Type-M V1
Wheel Size: 19x8.5
Wheel Offset: 45
If lowered (amount): 1"
Questions on Tires
Tire Make/Model: Pirelli P-Zero M&S
Width/Sidewall-Diameter: 235/35R19
If lowered (amount): 1"
If i drop it by that amount would i have any problems with the brembo brakes and would there be any rub near the fender?
Questions on Wheels
Wheel Make/Model: 8.5 A-Spec Rims
Wheel Size: 18x8.5
Wheel Offset: 45
Spacer: 15mm or 10mm
If lowered (amount): 2"
On These Tires
Tire Make/Model: Yokohama AVID W4S XL
Width/Sidewall-Diameter: 245/40R-18
If lowered (amount): 2"
I want to know which spacer I should go with in the front without rubbing. Im looking at either the 15 or 10mm, Thanks.
Wheel Make/Model: 8.5 A-Spec Rims
Wheel Size: 18x8.5
Wheel Offset: 45
Spacer: 15mm or 10mm
If lowered (amount): 2"
On These Tires
Tire Make/Model: Yokohama AVID W4S XL
Width/Sidewall-Diameter: 245/40R-18
If lowered (amount): 2"
I want to know which spacer I should go with in the front without rubbing. Im looking at either the 15 or 10mm, Thanks.
the 15mm will require a slight fender roll and it will be mildly poking
Questions on Wheels
Wheel Make/Model: Acura TL-S Wheels
Wheel Size (**X**): 17x8
Wheel Offset (+**): 45
If lowered (amount): None
Questions on Tires
Tire Make/Model: Continental ExtremeContact DWS
Width/Sidewall-Diameter (***/**-**): 245/40/17
If lowered (amount): None
Would it be fine if I added 25mm spacers all around?
Wheel Make/Model: Acura TL-S Wheels
Wheel Size (**X**): 17x8
Wheel Offset (+**): 45
If lowered (amount): None
Questions on Tires
Tire Make/Model: Continental ExtremeContact DWS
Width/Sidewall-Diameter (***/**-**): 245/40/17
If lowered (amount): None
Would it be fine if I added 25mm spacers all around?
2007 TL-Type S - About to buy a wheel/tire package from wheelfire.com...
Questions on Wheels
Wheel Make/Model: MRR GT-1
Wheel Size (**X**): 19x8.5
Wheel Offset (+**): I'm buying from the website and it doesn't indicate?
If lowered (amount): None
Will these wheels fit my car with no problem? The wheel offset isnt clearly indicated, is that a problem?
Questions on Tires
Width/Sidewall-Diameter (***/**-**): 235/35/19
If lowered (amount): None
Tire Make/Model Options (these are all the options presented for the package):
- Nexen N3000 (package price: $1599)
- Nankang NS-2 (summer tire) (package price: $1599)
- Falken 452 (package price: $1699)
- Nitto NT555 (package price: $1823)
- General Exclaim (package price: $1831)
- Nitto InVo (package price: $1879)
- KUMHO SPT (package price: $1883)
- Toyo Tire Proxes 4 (package price: $1919)
I don't know much about tires, and also don't want to pay too much. At the same time, I want to make sure I get good quality so I'm willing to spend a decent amount. Any recommendations on these? Any help will be greatly appreciated...
Also, my final question: What do I need to get to have my internal TPMS pick up the new wheels? I don't want to have the sensor going crazy every day, but don't know what I need. I think I need to buy tpms sensors when buying the wheels (they'll install it when balancing and mounting i assume), and then it'll work when I have my dealer put on the new wheels/tires (anything additional involved such as programming or something)?
Any help would be greatly appreciated, Thanks!
Questions on Wheels
Wheel Make/Model: MRR GT-1
Wheel Size (**X**): 19x8.5
Wheel Offset (+**): I'm buying from the website and it doesn't indicate?
If lowered (amount): None
Will these wheels fit my car with no problem? The wheel offset isnt clearly indicated, is that a problem?
Questions on Tires
Width/Sidewall-Diameter (***/**-**): 235/35/19
If lowered (amount): None
Tire Make/Model Options (these are all the options presented for the package):
- Nexen N3000 (package price: $1599)
- Nankang NS-2 (summer tire) (package price: $1599)
- Falken 452 (package price: $1699)
- Nitto NT555 (package price: $1823)
- General Exclaim (package price: $1831)
- Nitto InVo (package price: $1879)
- KUMHO SPT (package price: $1883)
- Toyo Tire Proxes 4 (package price: $1919)
I don't know much about tires, and also don't want to pay too much. At the same time, I want to make sure I get good quality so I'm willing to spend a decent amount. Any recommendations on these? Any help will be greatly appreciated...
Also, my final question: What do I need to get to have my internal TPMS pick up the new wheels? I don't want to have the sensor going crazy every day, but don't know what I need. I think I need to buy tpms sensors when buying the wheels (they'll install it when balancing and mounting i assume), and then it'll work when I have my dealer put on the new wheels/tires (anything additional involved such as programming or something)?
Any help would be greatly appreciated, Thanks!
i would do toyo proxes 4
for the tpms you just need a competent tire shop that will not damage your sensors the sensors require no programming so long as the shop doesnt damage them you will be good to go within 5mile drive
Questions on Wheels
Wheel Make/Model: --------- XXR 522
Wheel Size (**X**): --------- 18x8.5
Wheel Offset (+**): --------- +30
If lowered (amount): -------- Stock Height but want to lower 1.5"
I have tried to search but obviously I faid - any quick input or help in the right direction? (I'm still searching)
Wheel Make/Model: --------- XXR 522
Wheel Size (**X**): --------- 18x8.5
Wheel Offset (+**): --------- +30
If lowered (amount): -------- Stock Height but want to lower 1.5"
I have tried to search but obviously I faid - any quick input or help in the right direction? (I'm still searching)
you need atleast a 18x8 wheel
2007 TL-Type S
Questions on Wheels
Wheel Make/Model: XXR 521's
Wheel Size (**X**):
Fronts:
18x8.5
5-114.3/5-120
Offset: +25
Rears:
18x10
5-114.3/5-120
Offset: +25
Wheel Offset (+**): +25 all around
If lowered (amount): yes 3inch all around
Questions on Tires
Tire Make/Model:NS-II Ultra Sport Nankang
Width/Sidewall-Diameter (***/**-**):
Front tires:
225/40/18
Rear tires:
245/35/18
If lowered (amount): yes 3inch all around
Will it clear the brembos?
Does it fit and not rub?
Do i need to roll my fenders?
Thank you.
Questions on Wheels
Wheel Make/Model: XXR 521's
Wheel Size (**X**):
Fronts:
18x8.5
5-114.3/5-120
Offset: +25
Rears:
18x10
5-114.3/5-120
Offset: +25
Wheel Offset (+**): +25 all around
If lowered (amount): yes 3inch all around
Questions on Tires
Tire Make/Model:NS-II Ultra Sport Nankang
Width/Sidewall-Diameter (***/**-**):
Front tires:
225/40/18
Rear tires:
245/35/18
If lowered (amount): yes 3inch all around
Will it clear the brembos?
Does it fit and not rub?
Do i need to roll my fenders?
Thank you.
Transmission: Automatic
Year/Trim: 05 TL w aspec
Wheel Make/Model: Staggered Sevas S7
Wheel Size : front 20x8.5 Rear 20x10
Wheel Offset : Front is +40 & +43 rear
Tire size:225/30/20 and 255/30/20 Rear
If lowered (amount): comptech springs ... with GYB GR2 shocks.
I want to ride a thicker tire. What's the thickest I could run?
Year/Trim: 05 TL w aspec
Wheel Make/Model: Staggered Sevas S7
Wheel Size : front 20x8.5 Rear 20x10
Wheel Offset : Front is +40 & +43 rear
Tire size:225/30/20 and 255/30/20 Rear
If lowered (amount): comptech springs ... with GYB GR2 shocks.
I want to ride a thicker tire. What's the thickest I could run?
265/30-20 rear
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto):AUTO
Year/Trim (04-07, Base or Type S):07 TYPE S
Wheel Make/Model: TSW KYALAMI
Wheel Size (**X**):19X7.5 all around
Wheel Offset (+**):42
If lowered (amount):1"
Will these clear the brakes? Came off a Lexus is300.
Transmission (Manual or Auto):AUTO
Year/Trim (04-07, Base or Type S):07 TYPE S
Wheel Make/Model: TSW KYALAMI
Wheel Size (**X**):19X7.5 all around
Wheel Offset (+**):42
If lowered (amount):1"
Will these clear the brakes? Came off a Lexus is300.
will need a 25mm ATLEAST to clear the brembos
Questions on Wheels
Wheel Make/Model:Linea Corse BBS LM Reps
Wheel Size (**X**): 19x8.5
Wheel Offset (+**): 15
If lowered (amount): 1.5~2 inches
heres the specs
https://acurazine.com/forums/car-parts-sale-361/bbs-lm-replicas-19x8-5-15-w-new-tires-815380/
im pretty sure it will fit with at least a 1.5 drop at least. hoping it will be flushed a little.
Wheel Make/Model:Linea Corse BBS LM Reps
Wheel Size (**X**): 19x8.5
Wheel Offset (+**): 15
If lowered (amount): 1.5~2 inches
heres the specs
https://acurazine.com/forums/car-parts-sale-361/bbs-lm-replicas-19x8-5-15-w-new-tires-815380/
im pretty sure it will fit with at least a 1.5 drop at least. hoping it will be flushed a little.
Looking at purchasing these wheels for my car. I have had 20s on my car in the past but these are a little different then my old setup. Just want to know if I would have any issues.
Transmission: Automatic
Year/Trim: 05 TL w aspec
Wheel Make/Model: XXR 006
Wheel Size : front/rear 20x8.5
Wheel Offset : Front/rear +35
Tire size: 245/35/20 all the way around
If lowered (amount): comptech springs (1 inch )... with GYB GR2 shocks.
Transmission: Automatic
Year/Trim: 05 TL w aspec
Wheel Make/Model: XXR 006
Wheel Size : front/rear 20x8.5
Wheel Offset : Front/rear +35
Tire size: 245/35/20 all the way around
If lowered (amount): comptech springs (1 inch )... with GYB GR2 shocks.
Hate to be that guy but my question is will these wheels clear the front calipers? I talked to Varrstoen and they said the front will not. Can I have any verification on this issue? Thank you in advance.
Questions on Wheels
Wheel Make/Model: Varrstoen 2.2.2
Wheel Size (**X**): 19x9.5
Wheel Offset (+**): +22
If lowered (amount): F/F Coilovers
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): Type S
Questions on Wheels
Wheel Make/Model: Varrstoen 2.2.2
Wheel Size (**X**): 19x9.5
Wheel Offset (+**): +22
If lowered (amount): F/F Coilovers
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): Type S
i just put some wheels on my car last night. the fronts were a pain, but the rears fit with minor rolling. here's the specs:
Transmission: Automatic
Year/Trim: 08 TL-S
Wheel Make/Model: Privat Akzent
Wheel Size : front/rear 19x9.5
Wheel Offset : Front/rear +25
Tire size: 225/40/19 all the way around (nankang ns2's)
If lowered (amount): Tein SS- about 2-2.5"
Rears are rolled, and running a 3mm spacer.
Fronts are rolled, pulled, and the fender ground down where it meets the front bumper.
Camber specs for now: rear -1.9* front -1.3* (until i get a camber kit for up front, then I'll go -2.5* or so).
The front rubs slightly, over bumps when turning. It is mostly wheel liner, but it DOES catch the fender from time to time. With a bit more negative camber this should be alleviated.
So, a 9.5" wheel with relatively low offset is possible up front, it just takes a while to massage the front fenders to work. the ride height is higher than I'd like it to be, but I believe with more neg. camber up front I should be able to go lower. hope this helps anyone considering the fitment. it's a bitch, but it DOES work.
Transmission: Automatic
Year/Trim: 08 TL-S
Wheel Make/Model: Privat Akzent
Wheel Size : front/rear 19x9.5
Wheel Offset : Front/rear +25
Tire size: 225/40/19 all the way around (nankang ns2's)
If lowered (amount): Tein SS- about 2-2.5"
Rears are rolled, and running a 3mm spacer.
Fronts are rolled, pulled, and the fender ground down where it meets the front bumper.
Camber specs for now: rear -1.9* front -1.3* (until i get a camber kit for up front, then I'll go -2.5* or so).
The front rubs slightly, over bumps when turning. It is mostly wheel liner, but it DOES catch the fender from time to time. With a bit more negative camber this should be alleviated.
So, a 9.5" wheel with relatively low offset is possible up front, it just takes a while to massage the front fenders to work. the ride height is higher than I'd like it to be, but I believe with more neg. camber up front I should be able to go lower. hope this helps anyone considering the fitment. it's a bitch, but it DOES work.
you need 225/35-19
'05, Base. Will this fit ?
My Wheels
Wheel Make/Model: Lorenzo w27 Black Machined Face : http://www.lorenzowheels.com/wheels/...d=8&groupid=18
Wheel Size (19X8):
Wheel Offset (+40):
If lowered (amount): 1''
Questions on Tires
Tire Make/Model: BFGoodrich g-Force T/A KDW2 Width/Sidewall-Diameter (245/35ZR19):
If lowered (amount): 1''
or
Tire Make/Model: BFGoodrich g-Force T/A KDW2 Width/Sidewall-Diameter (265/30ZR19):
If lowered (amount): 1''
When i do the conversion of the original Tire Diameter 235/45/17 (25,3') the guide says i need to go for 265/30/19 to get 25,3'.
My Wheels
Wheel Make/Model: Lorenzo w27 Black Machined Face : http://www.lorenzowheels.com/wheels/...d=8&groupid=18
Wheel Size (19X8):
Wheel Offset (+40):
If lowered (amount): 1''
Questions on Tires
Tire Make/Model: BFGoodrich g-Force T/A KDW2 Width/Sidewall-Diameter (245/35ZR19):
If lowered (amount): 1''
or
Tire Make/Model: BFGoodrich g-Force T/A KDW2 Width/Sidewall-Diameter (265/30ZR19):
If lowered (amount): 1''
When i do the conversion of the original Tire Diameter 235/45/17 (25,3') the guide says i need to go for 265/30/19 to get 25,3'.
yes those will fit but go with the 235/35/19 a 265 is just way to wide on a 8" rim you would only run that size tire on a 9.5"-10" wide rim and would look awkward if ran in the front
if i were you i would probably go with the +32 offset make it more aggresive looking or if you wanted to be flush go with the +20
i am assuming you dont want to stagger??
if i were you i would probably go with the +32 offset make it more aggresive looking or if you wanted to be flush go with the +20
i am assuming you dont want to stagger??
19x8 +40 (235/35-19)
19x9.5 +40 (255/30-19)
tire sizes added for convenience
The following users liked this post:
wtf8269 (01-16-2012)
#1802
Instructor
Wheel: Varrstoen 2.2.2
Size: 19x9.5 and 19x10.5
Offsets: +30 and +30
Lowered: Tein SS and looking to have a stance like "bforbrian" and his 19" LE37s
Transmission: Auto
Model: Type S
Will these widths and offsets fit? I am willing to stretch tires and run neg camber. Any ideas on tire sizes, fender work, and camber specs?
Size: 19x9.5 and 19x10.5
Offsets: +30 and +30
Lowered: Tein SS and looking to have a stance like "bforbrian" and his 19" LE37s
Transmission: Auto
Model: Type S
Will these widths and offsets fit? I am willing to stretch tires and run neg camber. Any ideas on tire sizes, fender work, and camber specs?
#1803
Drifting
^ youre pushing it but yes they can and will fit if you do it right... front you will probably need to run a 225/35/19 the rears a 235/35/19 its guna be a pretty big stretch on both rims i am not sure if a 245/35/19 will work in the rear ...
you will need to roll/cut rears and deffinately need to cut the front tab on the front fender where it meets with the bumper... depending on how low you want to be you may have to do some pulling of the fenders as well...
you most likely will have to run some negative camber in the rear maybe arou nd -4 to -5
its doable just depends on what you want and how much work you want to do
you will need to roll/cut rears and deffinately need to cut the front tab on the front fender where it meets with the bumper... depending on how low you want to be you may have to do some pulling of the fenders as well...
you most likely will have to run some negative camber in the rear maybe arou nd -4 to -5
its doable just depends on what you want and how much work you want to do
#1804
94 DC4 RS LSV/Turbo
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
Wheel: Varrstoen 2.2.2
Size: 19x9.5 and 19x10.5
Offsets: +30 and +30
Lowered: Tein SS and looking to have a stance like "bforbrian" and his 19" LE37s
Transmission: Auto
Model: Type S
Will these widths and offsets fit? I am willing to stretch tires and run neg camber. Any ideas on tire sizes, fender work, and camber specs?
Size: 19x9.5 and 19x10.5
Offsets: +30 and +30
Lowered: Tein SS and looking to have a stance like "bforbrian" and his 19" LE37s
Transmission: Auto
Model: Type S
Will these widths and offsets fit? I am willing to stretch tires and run neg camber. Any ideas on tire sizes, fender work, and camber specs?
^ youre pushing it but yes they can and will fit if you do it right... front you will probably need to run a 225/35/19 the rears a 235/35/19 its guna be a pretty big stretch on both rims i am not sure if a 245/35/19 will work in the rear ...
you will need to roll/cut rears and deffinately need to cut the front tab on the front fender where it meets with the bumper... depending on how low you want to be you may have to do some pulling of the fenders as well...
you most likely will have to run some negative camber in the rear maybe arou nd -4 to -5
its doable just depends on what you want and how much work you want to do
you will need to roll/cut rears and deffinately need to cut the front tab on the front fender where it meets with the bumper... depending on how low you want to be you may have to do some pulling of the fenders as well...
you most likely will have to run some negative camber in the rear maybe arou nd -4 to -5
its doable just depends on what you want and how much work you want to do
235/35-19 is maxing the back and isn't really that BIG of a stretch I think a 235 no a 10.5 looks
here's a little site to give you an idea on stretching
http://www.tyrestretch.com/index.php
#1806
Fear and Loathing in my
iTrader: (3)
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): 05 Base
Wheel Make/Model: TSW Snetterton
Wheel Size: 18x8
Wheel Offset: 30
If lowered (amount): 1.4" (Tokico Blues w/ H&R Sport)
I don't want a bulky tire, but I don't want rubebr bands or any stretch. What do you think about the following sizes?
215-35
225-40
235-40
Year/Trim (04-07, Base or Type S): 05 Base
Wheel Make/Model: TSW Snetterton
Wheel Size: 18x8
Wheel Offset: 30
If lowered (amount): 1.4" (Tokico Blues w/ H&R Sport)
I don't want a bulky tire, but I don't want rubebr bands or any stretch. What do you think about the following sizes?
215-35
225-40
235-40
#1809
94 DC4 RS LSV/Turbo
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): 05 Base
Wheel Make/Model: TSW Snetterton
Wheel Size: 18x8
Wheel Offset: 30
If lowered (amount): 1.4" (Tokico Blues w/ H&R Sport)
I don't want a bulky tire, but I don't want rubebr bands or any stretch. What do you think about the following sizes?
215-35
225-40
235-40
Year/Trim (04-07, Base or Type S): 05 Base
Wheel Make/Model: TSW Snetterton
Wheel Size: 18x8
Wheel Offset: 30
If lowered (amount): 1.4" (Tokico Blues w/ H&R Sport)
I don't want a bulky tire, but I don't want rubebr bands or any stretch. What do you think about the following sizes?
215-35
225-40
235-40
if it is auto
run 225/40-18 tires and you might not need to roll em
#1810
Intermediate
iTrader: (1)
Join Date: Aug 2009
Age: 35
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
So I have Volk Racing Progressivs, 19x8 all around and am looking to get tires.
I was thinking either 235/35 or 245/35, what is the difference exactly and what do you recommend? Also are Nexen tires any good, I think that is the brand my friend supports and is trying to get me to buy em.
I was thinking either 235/35 or 245/35, what is the difference exactly and what do you recommend? Also are Nexen tires any good, I think that is the brand my friend supports and is trying to get me to buy em.
#1812
6th Gear
Join Date: Feb 2011
Location: Kenton, Ohio
Age: 36
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Question on Brembo/Big Brake Clearance
Transmission Manual
Year/Trim 04 Base
Wheel Falken torque 5
Wheel Size 19x8
Wheel Offset +38
tire size 215/35/19
not lowered
will these rub any place and will they clear my brakes?
Transmission Manual
Year/Trim 04 Base
Wheel Falken torque 5
Wheel Size 19x8
Wheel Offset +38
tire size 215/35/19
not lowered
will these rub any place and will they clear my brakes?
Last edited by ao_20; 05-19-2011 at 11:49 AM.
#1813
8th Gear
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): MANUAL
Year/Trim (04-07, Base or Type S): 04 / CANADIAN DYNAMIC AERO (possibly Canada's Type S equivalent for 2004?)
Wheel Make/Model: I'm considering a 5-star with a deepdish like the XXR 523 or the TSW Jarama
Wheel Size (**X**): 19s
Wheel Offset (+**): not sure what will work best
If lowered (amount): 1" ~ I definitely sit lower than the base TLs
I'm having a really hard time determining what rims and tires will work for my Black TL. Any advice on rims, tires, and offset is greatly appreciated. I've been reading through these posts for a few days now and haven't been able to find a solid solution for my setup.
This TL community is amazing!! I like how everyone is sharing their love for the 3rd Generation TLs
Transmission (Manual or Auto): MANUAL
Year/Trim (04-07, Base or Type S): 04 / CANADIAN DYNAMIC AERO (possibly Canada's Type S equivalent for 2004?)
Wheel Make/Model: I'm considering a 5-star with a deepdish like the XXR 523 or the TSW Jarama
Wheel Size (**X**): 19s
Wheel Offset (+**): not sure what will work best
If lowered (amount): 1" ~ I definitely sit lower than the base TLs
I'm having a really hard time determining what rims and tires will work for my Black TL. Any advice on rims, tires, and offset is greatly appreciated. I've been reading through these posts for a few days now and haven't been able to find a solid solution for my setup.
This TL community is amazing!! I like how everyone is sharing their love for the 3rd Generation TLs
#1814
94 DC4 RS LSV/Turbo
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): MANUAL
Year/Trim (04-07, Base or Type S): 04 / CANADIAN DYNAMIC AERO (possibly Canada's Type S equivalent for 2004?)
Wheel Make/Model: I'm considering a 5-star with a deepdish like the XXR 523 or the TSW Jarama
Wheel Size (**X**): 19s
Wheel Offset (+**): not sure what will work best
If lowered (amount): 1" ~ I definitely sit lower than the base TLs
I'm having a really hard time determining what rims and tires will work for my Black TL. Any advice on rims, tires, and offset is greatly appreciated. I've been reading through these posts for a few days now and haven't been able to find a solid solution for my setup.
This TL community is amazing!! I like how everyone is sharing their love for the 3rd Generation TLs
Transmission (Manual or Auto): MANUAL
Year/Trim (04-07, Base or Type S): 04 / CANADIAN DYNAMIC AERO (possibly Canada's Type S equivalent for 2004?)
Wheel Make/Model: I'm considering a 5-star with a deepdish like the XXR 523 or the TSW Jarama
Wheel Size (**X**): 19s
Wheel Offset (+**): not sure what will work best
If lowered (amount): 1" ~ I definitely sit lower than the base TLs
I'm having a really hard time determining what rims and tires will work for my Black TL. Any advice on rims, tires, and offset is greatly appreciated. I've been reading through these posts for a few days now and haven't been able to find a solid solution for my setup.
This TL community is amazing!! I like how everyone is sharing their love for the 3rd Generation TLs
the xxr 523 come in 18 or 20 fyi
and the tsw jarama come in 19x8 +40 which would require like a 10mm spacer to clear ur brakes
on a 19x8.5 +35 235/35-19 is perfect
on a 19x8 +40 with a 10mm spacer 235/35-19
#1815
Instructor
iTrader: (1)
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 07 base
Wheel Make/Model: vertini magic
Wheel Size (**X**): 20x 8.5
Wheel Offset (+**): 35mm
If lowered (amount): tein s techs
I think the size and offset will fit but am wondering what size tires to run to give the most protection without rubbing. thanks!
Year/Trim (04-07, Base or Type S): 07 base
Wheel Make/Model: vertini magic
Wheel Size (**X**): 20x 8.5
Wheel Offset (+**): 35mm
If lowered (amount): tein s techs
I think the size and offset will fit but am wondering what size tires to run to give the most protection without rubbing. thanks!
#1816
#1819
winner
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 08 base
Wheel Make/Model: varrstoen 2.2.1
Wheel Size (**X**): 18x9.5
Wheel Offset (+**): +22
If lowered (amount): tein basics, about 1.25-1.5 inches.
i had 18x9 +15's and they ran fine with my fenders rolled the way they are (i also dont want to roll any more or worse, needing to pull em). My math shows that the 18x9.5 +22 will actually tuck in 1mm more, i'm just worried about it clearing brakes. even though i don't have brembos, want to make sure. thanks!
Year/Trim (04-07, Base or Type S): 08 base
Wheel Make/Model: varrstoen 2.2.1
Wheel Size (**X**): 18x9.5
Wheel Offset (+**): +22
If lowered (amount): tein basics, about 1.25-1.5 inches.
i had 18x9 +15's and they ran fine with my fenders rolled the way they are (i also dont want to roll any more or worse, needing to pull em). My math shows that the 18x9.5 +22 will actually tuck in 1mm more, i'm just worried about it clearing brakes. even though i don't have brembos, want to make sure. thanks!
#1821
Intermediate
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 04 base
Wheel Make/Model: ame circlar spec r
Wheel Size (**X**): 19x9 and 19x10.5
Wheel Offset (+**): +22 all around
If lowered (amount): 2 inch
Year/Trim (04-07, Base or Type S): 04 base
Wheel Make/Model: ame circlar spec r
Wheel Size (**X**): 19x9 and 19x10.5
Wheel Offset (+**): +22 all around
If lowered (amount): 2 inch
#1822
Intermediate
I apologize, but please disregard my previous post regarding the rim size. The correct specs is below. thank you.
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 04 base
Wheel Make/Model: ame circlar spec r
Wheel Size (**X**): 19x9 and 19x10
Wheel Offset (+**): +22 all around
If lowered (amount): 2 inch
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 04 base
Wheel Make/Model: ame circlar spec r
Wheel Size (**X**): 19x9 and 19x10
Wheel Offset (+**): +22 all around
If lowered (amount): 2 inch
#1823
Instructor
iTrader: (3)
Join Date: Nov 2006
Location: Lincoln, CA
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Does this fit 2006 Acura TL Automatic?
Questions on Wheels
Wheel Make/Model: Ron Jon Legends
Wheel Size (**X**): 19x8
Wheel Offset (+**): 48
If lowered (amount): 1" all around
Need a spacer?
Questions on Wheels
Wheel Make/Model: Ron Jon Legends
Wheel Size (**X**): 19x8
Wheel Offset (+**): 48
If lowered (amount): 1" all around
Need a spacer?
#1826
10th Gear
I just bought an 08 TL Type-S. I don't wanna lower it cause its my daily driver but I do wanna fill out the wheel wells. Can I do a staggered wheel on it? Like an 8.5 in front and a 9.5 or possibly bigger in the rear? Oh and I wanna run 19in wheels. And if any one has an suggestions on a good brand I'm all ears. Thanks
#1827
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 05 base
Wheel Make/Model: Enkei RPF1
Wheel Size (**X**): 18x9.0
Wheel Offset (+**): +35mm - will need10mm spacer so true = +25mm
If lowered (amount): Stock currently, looking at H&R sport with Koni Sport ( Yellow ) so ~ 1.5 inch drop.
Question - can this set up work & make a clean look with out a bunch of poke ?? I would like to keep my current tire size - 245/40/18.
I notice on page 27 of your great on going thread here that you had a similar set up of wheel size, offset, drop & tire size - how did it look & how did you like the performance ?? The car I have is supercharged and it feels like I have a lot more engine than suspension - I would really like to dial in this 9.0 wide RFF1 ! Such a great wheel that looks so much better with the flatter spokes - regardless, I will be getting this wheel is some size. Heck, I am tempted to get rid of those big brakes..."If you drive fast enough, you don't need windsheild wipers"...and will probablay have a spot free view of your impact !
I really like the look of NBPacuraTL's set up with the RPF1, when gasoline prices were more reasonable, - smaller brake on front & 18x9.5 +38mm wheel.
https://acurazine.com/forums/showthr...highlight=rpf1
Let us know what you think, & Thank you for your on going advise. Fulcrum.
Year/Trim (04-07, Base or Type S): 05 base
Wheel Make/Model: Enkei RPF1
Wheel Size (**X**): 18x9.0
Wheel Offset (+**): +35mm - will need10mm spacer so true = +25mm
If lowered (amount): Stock currently, looking at H&R sport with Koni Sport ( Yellow ) so ~ 1.5 inch drop.
Question - can this set up work & make a clean look with out a bunch of poke ?? I would like to keep my current tire size - 245/40/18.
I notice on page 27 of your great on going thread here that you had a similar set up of wheel size, offset, drop & tire size - how did it look & how did you like the performance ?? The car I have is supercharged and it feels like I have a lot more engine than suspension - I would really like to dial in this 9.0 wide RFF1 ! Such a great wheel that looks so much better with the flatter spokes - regardless, I will be getting this wheel is some size. Heck, I am tempted to get rid of those big brakes..."If you drive fast enough, you don't need windsheild wipers"...and will probablay have a spot free view of your impact !
I really like the look of NBPacuraTL's set up with the RPF1, when gasoline prices were more reasonable, - smaller brake on front & 18x9.5 +38mm wheel.
https://acurazine.com/forums/showthr...highlight=rpf1
Let us know what you think, & Thank you for your on going advise. Fulcrum.
#1828
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): 06 base
Wheel Make/Model: XXR 502
Wheel Size (**X**): 18x9.5
Wheel Offset (+**): +35mm
If lowered (amount): don't know yet, depends on how big the gap will be. would consider springs or aspec
i was interested in these 9.5 wheels since the lip is larger than the 8.5 i do not want to go staggered.
will these fit the front wheels? will the front or rear poke out too much? is 245/40/18 ok for these wheels? thinking of Continental DWS
assuming they fit, should i consider larger sidewall to reduce any potential gap?
tsingh
Year/Trim (04-07, Base or Type S): 06 base
Wheel Make/Model: XXR 502
Wheel Size (**X**): 18x9.5
Wheel Offset (+**): +35mm
If lowered (amount): don't know yet, depends on how big the gap will be. would consider springs or aspec
i was interested in these 9.5 wheels since the lip is larger than the 8.5 i do not want to go staggered.
will these fit the front wheels? will the front or rear poke out too much? is 245/40/18 ok for these wheels? thinking of Continental DWS
assuming they fit, should i consider larger sidewall to reduce any potential gap?
tsingh
#1829
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): 08 base
Wheel Make/Model:MRR HR2
Wheel Size (**X**): 19x9.5
Wheel Offset (+**): +35mm
If lowered (amount): Eibach Pro Springs
will 245/35/19 DWS work?
Year/Trim (04-07, Base or Type S): 08 base
Wheel Make/Model:MRR HR2
Wheel Size (**X**): 19x9.5
Wheel Offset (+**): +35mm
If lowered (amount): Eibach Pro Springs
will 245/35/19 DWS work?
#1830
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): 08 base
Wheel Make/Model:MRR HR2
Wheel Size (**X**): 19x9.5
Wheel Offset (+**): +35mm
If lowered (amount): Eibach Pro Springs
will 245/35/19 DWS work?
Year/Trim (04-07, Base or Type S): 08 base
Wheel Make/Model:MRR HR2
Wheel Size (**X**): 19x9.5
Wheel Offset (+**): +35mm
If lowered (amount): Eibach Pro Springs
will 245/35/19 DWS work?
#1834
Drifting
yes you can do that tire size on those rims and offset
#1835
7th Gear
Join Date: May 2011
Location: Gatineau, Canada
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
I would like to know how to fit these:
Varrstoen ES 2.2.1 Matte Black
18x9.5 +22 with Falken 512 225/40/18 all around
on this
2004 acura tl, manual transmission, (brembo brakes)
I heard that 5mm spacers would be needed, anyone can confirm?
Thx
Varrstoen ES 2.2.1 Matte Black
18x9.5 +22 with Falken 512 225/40/18 all around
on this
2004 acura tl, manual transmission, (brembo brakes)
I heard that 5mm spacers would be needed, anyone can confirm?
Thx
#1837
Rev High; Drive Happy
iTrader: (2)
Join Date: Feb 2008
Location: Scarborough, Ontario
Age: 34
Posts: 4,076
Received 398 Likes
on
332 Posts
tranny: 6spd
year: 2oo4
wheel: MB Battles
size: 17x9.5
offset: +15
lowered: tein s-tech+tokico blue (1.25-1.5)
215/45/17
245/40/17
Someone selling those for not bad of a price, odd tire fitment IMO though.
and/or
wheels: hayashi racing
size: 18x8, 18x10 [front/rear]
offset: +15, +20 [front/rear]
tires: 235/40/18
year: 2oo4
wheel: MB Battles
size: 17x9.5
offset: +15
lowered: tein s-tech+tokico blue (1.25-1.5)
215/45/17
245/40/17
Someone selling those for not bad of a price, odd tire fitment IMO though.
and/or
wheels: hayashi racing
size: 18x8, 18x10 [front/rear]
offset: +15, +20 [front/rear]
tires: 235/40/18
#1839
Drifting
tranny: 6spd
year: 2oo4
wheel: MB Battles
size: 17x9.5
offset: +15
lowered: tein s-tech+tokico blue (1.25-1.5)
215/45/17
245/40/17
Someone selling those for not bad of a price, odd tire fitment IMO though.
i think its pushing it too much.... i mean you can pretty much make anything fit but will it look good? duno about this one... the rear tires would most likely rub.. just a wierd rim and tire combo
and/or
wheels: hayashi racing
size: 18x8, 18x10 [front/rear]
offset: +15, +20 [front/rear]
tires: 235/40/18
year: 2oo4
wheel: MB Battles
size: 17x9.5
offset: +15
lowered: tein s-tech+tokico blue (1.25-1.5)
215/45/17
245/40/17
Someone selling those for not bad of a price, odd tire fitment IMO though.
i think its pushing it too much.... i mean you can pretty much make anything fit but will it look good? duno about this one... the rear tires would most likely rub.. just a wierd rim and tire combo
and/or
wheels: hayashi racing
size: 18x8, 18x10 [front/rear]
offset: +15, +20 [front/rear]
tires: 235/40/18
those would fit nice and flush id run a 225/45/17
#1840
Looking for mods in
iTrader: (1)
Down sizing!
Yo Still, I am going from 20s to 19s but don't what tire size to go with. Help!
Wheel Style - Linea Corse Dyna
Wheel Diameter (Inches) - 19"
Wheel Width front - 8.5"
Wheel Width front - 10"
PCD Bolt Pattern - 5x114.3
Offset - +30F
Offset - +38Rmm
Drop - Tein SS adjustable current 2.25 front 1.75 rears-sometimes 2.20 with thicky thick girls
Color - Polished
My rear fenders got more rolls than a bakery
Wheel Style - Linea Corse Dyna
Wheel Diameter (Inches) - 19"
Wheel Width front - 8.5"
Wheel Width front - 10"
PCD Bolt Pattern - 5x114.3
Offset - +30F
Offset - +38Rmm
Drop - Tein SS adjustable current 2.25 front 1.75 rears-sometimes 2.20 with thicky thick girls
Color - Polished
My rear fenders got more rolls than a bakery
Last edited by supadupahyphy; 07-07-2011 at 05:49 PM. Reason: add more info