D-100: The Official "Does This Wheel and/or Tire Fit My Car" Thread
#1921
Drifting
i'm lookin into the Vossen CV2's the specs i would probably look at to get would be their 20x8.5 and rears would like their 20x10(worst case 20x9) if the 10's would fit good in the back, id slap the 9's up front, im trying to find out their offset, but their wheel specs link is down, let me kno what i would need to properly fit them, i have 08 type s AT
The following users liked this post:
TripAcez (08-25-2011)
#1922
Drifting
#1923
Drifting
Questions on Wheels
Wheel Make/Model: 5Zigen ZR+520
Wheel Size (**18x8.5**):
Wheel Offset (+37 or +47???):
If lowered (amount): None or very little.
Question on Brembo/Big Brake Clearance
Transmission (Manual with Brembo's)
Year/Trim ('06 Base):
Hi Guys,
I'm a new member...just picked up an '06 6MT. I've read a bunch of threads on these particular wheels. It seems that the most popular fitment is the 18x8.5 +37. I saw a few threads where people recommended 235 width tires, but said they rubbed with 245's when lowered. I have not been able to find any threads with people running the +47 fitment.
My goal is NOT an aggressive fitment. I want something that is relatively mild and conservative. I will most likely not even lower my car at all. If I do, it would only be minimal. I'm looking for the fitment that will be as close to stock as possible. I also don't plan on running particularly aggressive alignment settings...please assume stock.
According to my math, the +37 offset will give me 2mm more inner clearance, and bring the wheel face out 14mm towards the fender. From everything I've read, these will clear the Brembo's. My primary concern is rubbing, etc. I'm assuming that this won't be an issue at stock, or near stock height with a 235 width tire, but I just wanted to get more opinions.
The +47 would lose 8mm inboard clearance, and bring the wheel out 4mm towards the fender. My concern here is that inboard clearance. I have no idea how much space there is to work with. Will the wheels interfere with the Brembo's or rub the inner fender liner at full lock, etc.?
Can someone please recommend which offset would be better for my situation? Thank you very much for any assistance.
Wheel Make/Model: 5Zigen ZR+520
Wheel Size (**18x8.5**):
Wheel Offset (+37 or +47???):
If lowered (amount): None or very little.
Question on Brembo/Big Brake Clearance
Transmission (Manual with Brembo's)
Year/Trim ('06 Base):
Hi Guys,
I'm a new member...just picked up an '06 6MT. I've read a bunch of threads on these particular wheels. It seems that the most popular fitment is the 18x8.5 +37. I saw a few threads where people recommended 235 width tires, but said they rubbed with 245's when lowered. I have not been able to find any threads with people running the +47 fitment.
My goal is NOT an aggressive fitment. I want something that is relatively mild and conservative. I will most likely not even lower my car at all. If I do, it would only be minimal. I'm looking for the fitment that will be as close to stock as possible. I also don't plan on running particularly aggressive alignment settings...please assume stock.
According to my math, the +37 offset will give me 2mm more inner clearance, and bring the wheel face out 14mm towards the fender. From everything I've read, these will clear the Brembo's. My primary concern is rubbing, etc. I'm assuming that this won't be an issue at stock, or near stock height with a 235 width tire, but I just wanted to get more opinions.
The +47 would lose 8mm inboard clearance, and bring the wheel out 4mm towards the fender. My concern here is that inboard clearance. I have no idea how much space there is to work with. Will the wheels interfere with the Brembo's or rub the inner fender liner at full lock, etc.?
Can someone please recommend which offset would be better for my situation? Thank you very much for any assistance.
go with the +37 offsets and a 235/40/18 tire it will look and fit just fine
#1924
08 Pmm auto
Wheel Make/Model: axis pentagon
Wheel Size: 19x9.5 all around
Wheel Offset: +40
drop: planning on 1-1.5"
tire: 245/35/19
Will this setup work/not rub without a camber kit? im ok with the natural camber of the drop but dont want to add a camber kit
Wheel Make/Model: axis pentagon
Wheel Size: 19x9.5 all around
Wheel Offset: +40
drop: planning on 1-1.5"
tire: 245/35/19
Will this setup work/not rub without a camber kit? im ok with the natural camber of the drop but dont want to add a camber kit
#1925
Drifting
^^They should fit fine with that type of a drop.... any lower the fronts most likely will rub....
you dont want to go staggered? like a 8" front and 9.5" rear?
you dont want to go staggered? like a 8" front and 9.5" rear?
#1927
Racer
So once again, does anyone know if that set up will fit? Thx
#1928
Racer
#1929
Racer
iTrader: (3)
What's the widest and highest offset (further in) has anyone gone on a 3G TL.
Example has anyone done 18/19/20 X 10 all around with like a +50 offset or close to that. I'm interesting in going wide on my TL but not have it poke but I'm concerned about fitment behind the wheel and it possibly touching the suspension. I'm somewhat of an expert on SC offsets and have done 18x12+54 on my stock body SC. Just curious about the 3G TL fitment.
Example has anyone done 18/19/20 X 10 all around with like a +50 offset or close to that. I'm interesting in going wide on my TL but not have it poke but I'm concerned about fitment behind the wheel and it possibly touching the suspension. I'm somewhat of an expert on SC offsets and have done 18x12+54 on my stock body SC. Just curious about the 3G TL fitment.
#1930
Former Sponsor
guysss helppppp im planing on buying these
https://acurazine.com/forums/car-parts-sale-361/%5Bsocal-%5D-te37-reps-19x9-5-wheels-tires-830726/
te37 reps
jbl apolo
19" by 9.5 all around offset+40
they won't clear bbk huh?
i want a flush look and drop it low as possible on these wheels
https://acurazine.com/forums/car-parts-sale-361/%5Bsocal-%5D-te37-reps-19x9-5-wheels-tires-830726/
te37 reps
jbl apolo
19" by 9.5 all around offset+40
they won't clear bbk huh?
i want a flush look and drop it low as possible on these wheels
#1931
Drifting
I would think that set up would work just fine... I dont think you will have to do too much of fender mods or camber... you just need to run 30 series tires
haha well if they had there spec sheet up id help you out a bit more but its not showing the offsets available... they are nice lookn rims though!
widest I would say you can go on a TL would be 10" front and maybe 11" rear depending on offsets... Id say you would need a +35 offset front and +45 offset rear... also depends if you have the brembos up front...
a +40 won't be flush ... I would go with a +25-+30 range to be flush... with a +40 i dont think you will clear the BBK's either
haha well if they had there spec sheet up id help you out a bit more but its not showing the offsets available... they are nice lookn rims though!
What's the widest and highest offset (further in) has anyone gone on a 3G TL.
Example has anyone done 18/19/20 X 10 all around with like a +50 offset or close to that. I'm interesting in going wide on my TL but not have it poke but I'm concerned about fitment behind the wheel and it possibly touching the suspension. I'm somewhat of an expert on SC offsets and have done 18x12+54 on my stock body SC. Just curious about the 3G TL fitment.
Example has anyone done 18/19/20 X 10 all around with like a +50 offset or close to that. I'm interesting in going wide on my TL but not have it poke but I'm concerned about fitment behind the wheel and it possibly touching the suspension. I'm somewhat of an expert on SC offsets and have done 18x12+54 on my stock body SC. Just curious about the 3G TL fitment.
guysss helppppp im planing on buying these
https://acurazine.com/forums/showthread.php?t=830726
te37 reps
jbl apolo
19" by 9.5 all around offset+40
they won't clear bbk huh?
i want a flush look and drop it low as possible on these wheels
https://acurazine.com/forums/showthread.php?t=830726
te37 reps
jbl apolo
19" by 9.5 all around offset+40
they won't clear bbk huh?
i want a flush look and drop it low as possible on these wheels
a +40 won't be flush ... I would go with a +25-+30 range to be flush... with a +40 i dont think you will clear the BBK's either
The following users liked this post:
AcuraAddic (08-29-2011)
#1935
Schooling Required...
Hey first post here... (ill try to make it as painless as possible)
Wheel Make/Model: XXR/518
Wheel Size: 19x8.5
Wheel Offset: not sure
lowered: not sure
So im looking to put these on a 2003 3.2 TL type-S (automatic).
I am not even going to pretend to know the first thing about modding, I do understand that lowering the car will prob be needed as a huge gap does not look good.
Im looking for all the knowledge and insight I can get; which offset would be best, which tires (size,width,etc), lowering (how should i lowwer -i.e. which product or products should I use- and how much should I drop), if rolling would be needed (if yes both front and back?)
I am looking for an aggressive stance yet not too much as to not look ridiculous. I would want performance to be kept in mind over aesthetics.
I hope Im making sense, it sucks being a newbie, I do learn quick though.
Thank you all for your insight and knowledge in advance, as well as being patient with me as I have lots to learn.
Wheel Make/Model: XXR/518
Wheel Size: 19x8.5
Wheel Offset: not sure
lowered: not sure
So im looking to put these on a 2003 3.2 TL type-S (automatic).
I am not even going to pretend to know the first thing about modding, I do understand that lowering the car will prob be needed as a huge gap does not look good.
Im looking for all the knowledge and insight I can get; which offset would be best, which tires (size,width,etc), lowering (how should i lowwer -i.e. which product or products should I use- and how much should I drop), if rolling would be needed (if yes both front and back?)
I am looking for an aggressive stance yet not too much as to not look ridiculous. I would want performance to be kept in mind over aesthetics.
I hope Im making sense, it sucks being a newbie, I do learn quick though.
Thank you all for your insight and knowledge in advance, as well as being patient with me as I have lots to learn.
#1937
Former Sponsor
I would think that set up would work just fine... I dont think you will have to do too much of fender mods or camber... you just need to run 30 series tires
haha well if they had there spec sheet up id help you out a bit more but its not showing the offsets available... they are nice lookn rims though!
widest I would say you can go on a TL would be 10" front and maybe 11" rear depending on offsets... Id say you would need a +35 offset front and +45 offset rear... also depends if you have the brembos up front...
a +40 won't be flush ... I would go with a +25-+30 range to be flush... with a +40 i dont think you will clear the BBK's either
haha well if they had there spec sheet up id help you out a bit more but its not showing the offsets available... they are nice lookn rims though!
widest I would say you can go on a TL would be 10" front and maybe 11" rear depending on offsets... Id say you would need a +35 offset front and +45 offset rear... also depends if you have the brembos up front...
a +40 won't be flush ... I would go with a +25-+30 range to be flush... with a +40 i dont think you will clear the BBK's either
to clear bbk do you think i can do it if i put like a 15 spacer???
#1938
Drifting
^ for sure... if you do the fronts you prob wana do the backs too with a spacer to make them look balanced otherwise fronts will be flush rears not
#1941
Drifting
you are fine with those rims and offsets i would run a 245/40/18..... a 45 sidewall will be too tall and awkward looking and throw off the speedo
#1942
04 nbp auto
Wheel Make/Model: xxr 521
Wheel Size: 20x8.5f/20x10.5r
Wheel Offset: +30f/+35r
drop: tein s-tech on aspec shocks
tire: guessing 225/35 for front and 245/35 for rear
Wheel Make/Model: xxr 521
Wheel Size: 20x8.5f/20x10.5r
Wheel Offset: +30f/+35r
drop: tein s-tech on aspec shocks
tire: guessing 225/35 for front and 245/35 for rear
#1944
Racer
05 TL Automatic
Questions on Wheels
Wheel Make/Model:
Wheel Size (**X**): 18" x 10"
Wheel Offset (+**): +50
If lowered (amount): 1-1.5" in the future
I'm worried most about inner strut clearance. Will I have to run wheel spacers in order to make the wheels work?
Questions on Wheels
Wheel Make/Model:
Wheel Size (**X**): 18" x 10"
Wheel Offset (+**): +50
If lowered (amount): 1-1.5" in the future
I'm worried most about inner strut clearance. Will I have to run wheel spacers in order to make the wheels work?
#1945
Drifting
hmmm i have never seen anyone run this size i am not sure if it will work up front like you said the inner clearance with a +50 .... can you ntest fit to see??
#1950
08 TL Base Auto
Wheel Make/Model: Enkei rpf1
Wheel Size: 18x8.5 all around
Wheel Offset: +30
drop: Eventually a 1" to 1.5" drop
tire: 245/40/18
Will this setup work? Do I need hub centric rings?
Wheel Make/Model: Enkei rpf1
Wheel Size: 18x8.5 all around
Wheel Offset: +30
drop: Eventually a 1" to 1.5" drop
tire: 245/40/18
Will this setup work? Do I need hub centric rings?
#1951
Instructor
Wheel Make/Model: Axis super hiro matte black
wheel size 19x9.5
hub bore 73.1
offset +45
tire 245/35/19
Being lowered on HT Spec coilovers 2 inches
Will this setup work and do I need spacers?
Tks for the help
wheel size 19x9.5
hub bore 73.1
offset +45
tire 245/35/19
Being lowered on HT Spec coilovers 2 inches
Will this setup work and do I need spacers?
Tks for the help
Last edited by JDECON; 09-17-2011 at 12:36 AM. Reason: adding in more info
#1952
Drifting
Hello wheel fitment guys, Been thinking of getting a set of advan model T7 but ravspec has a few sets that are 19x9 one is 25 offset and the other less aggressive is 45 will any fender rolling require to make these fit. I am one a moderate drop with comptech and tokicos!!
do you have the brembo brakes up front? if not i think they would fit as is all around with a 245 width tire
#1954
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
I just bought a 2007 TL auto
Questions on Wheels
Wheel Make/Model: XXR 962
Wheel Size (**X**):18x9.5
Wheel Offset (+**):+35
If lowered (amount): slammed as much as possible (tein ssp)
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 07
Questions on Wheels
Wheel Make/Model: XXR 962
Wheel Size (**X**):18x9.5
Wheel Offset (+**):+35
If lowered (amount): slammed as much as possible (tein ssp)
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 07
#1958
Drifting
I just bought a 2007 TL auto
Questions on Wheels
Wheel Make/Model: XXR 962
Wheel Size (**X**):18x9.5
Wheel Offset (+**):+35
If lowered (amount): slammed as much as possible (tein ssp)
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 07
Questions on Wheels
Wheel Make/Model: XXR 962
Wheel Size (**X**):18x9.5
Wheel Offset (+**):+35
If lowered (amount): slammed as much as possible (tein ssp)
Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 07
might need a 5mm spacer to clear BBK