gqdabien

One more question..

2006 TL AT, no Brembos

Questions on Tires

Wheel Make/Model: XXR 502
Wheel Size (**X**):F:20X8.5, R:20X10
Wheel Offset (+**):+35
If lowered (amount): Tein S-Techs

What size tires without too much stretching and no fender pulling?

Thanks again! very helpful thread!

mixed_images

First post to the forum and got a question. Will a 18x9.5 +20 offset work on a 05 TL AT? and if so what tire?? Car is not lowered yet but will be if i get the wheels

TyPeSeXy05

I have a 05 tl base with brembo brakes and tl-s rims, just wanted to Make sure i could fit 245 width tires with no issues as far as rubbing or what not, it has the a-spec suspension as well, but get a suspension kit in future. Im assuming there shouldnt be a problem since i read some of you guys doing 18's with 245's just wanted to see if there is anything im not catching. Thanks and sorry if this has been asked already, (searched in this thread to no avail!)

krnchunjae

iTrader: (1)

Wheel Make/Model: axis halo
Wheel Size (**X**):18x8.
Wheel Offset (+**):+35
If lowered (amount): Tein Basics (1.5''~1.75")

will it work without any mod?...which tire will be perfect?

stillhere153

iTrader: (1)

the rear will require either a 245/30-20 roll the fenders
the front require 235/30-20 as is... no mods needed

should clear brembos

that offset is low... so 225/40-18 with fenders rolled and negative camber added.. ps. thats going to be stretched

on the factory tl-s wheels you can run any of the following
235/45-17
245/45-17
245/40-17
255/40-17

good luck

no mods needed 245/40-18

blurryTL04

Wheel Make/Model: Rota P45r
Wheel Size (**X**):18x9.5
Wheel Offset (+**):+30
If lowered (amount): BlackWorksRacing coilover (2.5-3)

Will this fit on a 2004 acura tl auto, Also what size tires would I have to run?

gqdabien

If i roll the rear fenders, what tire size would i be able to fit in the back.

Just to be clear, fronts will not rub at all without any fender mods?

Thank you! So helpful!

vas25tl

Wheel Make/Model: Unsure at this time
Wheel Size (**X**):20x7.5
Wheel Offset (+**):+42
If lowered (amount): Factory

These were on a 2G Tl-S. Will this fit a 05TL with brembos? Tire size is 225/35/20. I know they're a little thin...

TIA

r8dirz

What's my best tire options: 04' TL Running Axis Pentas 19X8.5, +35 offset all around. Dropped on 1" on comptechs, would like to go 245/35/19, most wheel shops are saying 235/35/19. Any insight, greatly appreciated! Thanks

MZL

2004 TL
Wheel Make/Model: 5Zigen ZR+520
Wheel Size: 18x9.5
Wheel Offset: +37
Stock height

I think it was already mentioned that 255/35/18 tires should work but 265/35/18 would keep the wheel diameter closer to stock and I would prefer to have that .2 of extra sidewall.

I assume the 265s shouldn't be a problem with a stock ride height. If that's the case, how long could I go without any issues? 1 inch?

MZL

How LOW not how long... mind's wandering today

SoftwareDrone

Forgive me as I am very new to this (purchased a 2007 Type-S two days ago). I have been crawling through this thread and still can't figure out if I can mount the stock TL wheels on my Type-S. Any help would be appreciated.
Thank you.

stillhere153

iTrader: (1)

it will fit with 225/40-18 tires... not a very performance oriented setup just looks

to fit 255/30-20 you will have to dial in some negative camber after the roll and that will still likely rub on dips and passengers in the back
wheels cannot be narrower than x8 to even begin to clear the brembos
245/35-19 is fine on ct drop
265 will require you to roll the fenders and dial in some negative camber...

265 with just rolling the fenders will rub damn near everywhere except flat surface on any height

they fit...
the following clear the brembos
04-05 Base 5 Spoke
06 Base 5 Spoke (with TPMS cradle)
07-08 Base Split 5 Spoke
07-08 Type S Honey Combe

blurryTL04

[quote=stillhere153;12373947]it will fit with 225/40-18 tires... not a very performance oriented setup just looks

What would I need to do to get it more performance oriented? sorry, I am new to wheel fitments. thanks.

lkoszela

hello hello

Questions on Wheels
Wheel Make/Model: 05 tl
Wheel Size (**X**):17x8
Wheel Offset (+**):40
If lowered (amount):none

will i clear if i put 235/40-17 ? would there be any rubbing involved?

tragichero

iTrader: (5)

Just got some Ron Jon wheels, do I need to get tapered lugs or will the stock ones be ok? And what size lugs?

captain_crunch

18X8.5 +25 offset (fronts)
18X9.5 +25 offset (rears)

Will this clear 3G Brembo's? Also what tires would be best. 235-40-18?

Thanks in advance.

krnchunjae

iTrader: (1)

Wheel Make/Model: 2005 TL
Wheel Size (**X**):18x9.0
Wheel Offset (+**):+15
If lowered (amount):Tein Basics (1.25'')

I'm guessing I need a fender work there huh?
and Can I go lower to like 1.5"?
tires size?
Thanks always

Ch33sE1

Questions on Wheels
Wheel Make/Model: Work VS-XX
Wheel Size (**X**): 19
Wheel Offset (+**): ??
Tires: Falken 452 235/35
If lowered (amount): A-Spec Suspension

I have an 08 TL-S with Brembros What offset do I need so that I won't need to roll my fenders and am I going to need spacers (hoping no)?

stillhere153

iTrader: (1)

[QUOTE=blurryTL04;12373990]oh what I ment to say is it'll ride like shit

if the car is auto it fits fine... 235/45-17 tires are the correct tires

12x1.5 you need tuner style... ie. muteki

yes it fit the brakes 225/40-18 all around or you could try 235/40-18 just in the rear

rolling, and negative camber required

def gonna need fender work or a crazy 215 series tire stretched

most likely a +35... those wheels generally can be ordered with high disk clearance for the front, take that into consideration when purchasing wheels

Ch33sE1

And in the back for a staggered look, what's the widest offset I can use without rolling?

stillhere153

iTrader: (1)

19x9.5 +40 and depending on the tire size, 245/35-19 no rolling, 255/35-19 will require rolling

Blakvrtbeast

iTrader: (1)

18x8.5 +32 A disk all around work vs-xx , will they clear the front brembos ?

stillhere153

iTrader: (1)

Alaric

Wheel Make/Model: 18" TSX A-Spec
Wheel Size (18X7.5)
Wheel Offset (+55)??

They are wrapped around 235/40/ZR18.

Will these fit on a 2007 TL Type-S?

murph145

ehhh god no! first off dont go smaller than 8" wide on any rim for a TL second of all +55 offset i dont think soo you would have to put on at least a 15-20mm spacer to make them fit just get some TL Aspecs if you want something stock looking and in 18"

murph145

since your only lowered on aspecs you can roll a 9.5 rear +35 offset or even more agressive fitment without rolling fenders... if you were slamed more than you would have to roll rear fenders

i have a 19x9.5 rear +40 offset with 265/30/19 and no rolled rear fenders...im lowered like 2.5"

stillhere153

iTrader: (1)

murph is correct 18x7.5 +55 is far to inward
18x8 +45 is the narrowest and highest offset that would look good

his question pertained more towards brembo clearance

Phat_Type S

I have question about wheels offset with OEM brembo brake....

Front: 19x8 +8 Offset (Equivalent to a 19x9 +22 Offset) But with a little bigger lip. Approximately 3in Lip
Rear: 19x10 +22 Offset. Approximately 4in Lip

Do you guys think will fit on TL-S ?
Do you think I need Spacers ?

Thank you......

Slooo97CL

iTrader: (1)

If i bought the a-spec lip kit, could I fit the type S quad setup?

Phat_Type S

Edit

I have question about wheels offset with OEM brembo brake....

Front: 19x8 +8 Offset (Equivalent to a 19x9 +22 Offset) But with a little bigger lip. Approximately 3in Lip
Rear: 19x10 +22 Offset. Approximately 4in Lip
Tires 225/35/19 and 235/35/19
Im lowered like 2.5" with TEIN basic coilovers

Do you think will fit on TL-S ?
Do you think I need Spacers ?
Do you think I need to roll my fenders ?

Thank you......

furnac3

uestions on Wheels
Wheel Make/Model: Volks/CE28
Wheel Size (18X8.5):
Wheel Offset (+30):
If lowered (amount): 1.75" fronts and 1.5" rears

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 04 6 speed with Brembo Brakes


Questions on Tires
Tire Make/Model:
Width/Sidewall-Diameter (245/40-18):
If lowered (amount): 1.75" fronts and 1.5" rears

Would this setup fit? would i need to roll my fenders and get spacers?

d-townhakuzo

Ok Mr. Stillhere...here is another one for you...

Wheel Make/Model: Forgestar F14's
Wheel Size (**X**): 19x8.5-F 19x9-R
Wheel Offset (+**): +26-F +20-R
If lowered (amount): S. Techs on Koni Yellows...lower perch front...middle perch rear...whats the damage?

stillhere153

iTrader: (1)

WOW... do you know just how passed the fender that setup is??? you will have to run like a 215 tire in the front and no bigger than a 225 in the back and roll and negative camber... no they do not require spacers... yes they do clear the big brakes by alot

you will have to roll fenders



spacers needed
roll fenders
the front is going to be extra tight with your drop, so you may want to consider 225/40-18 instead

stretch the front camber the rear with a stretch of course and you should be flushed

d-townhakuzo

What were to happen if I raised the car one perch on the front?

stillhere153

iTrader: (1)

if memory serves correct your ride would be 10mm higher...

dagreenek

iTrader: (2)

i have a question about offset...

got a 06 tl with stoptech calipers

wondering if 19x8 +48 ce28's will fit or not??

im on tein ss coilovers and is all the way down.

Maddizm

iTrader: (5)

If I get 18x9 what is the correct tire width I would need to get? I wanna make it flush with my ROLLED fenders, but I don't want tire stretch, so what offset would push it out to the max (+25? +20?) where I could still have the 'correct' tire size. This will be performance oriented. Plus I'm dropped about 2" (No fingers on OEM wheels).

WhipGame

Tire Make/Model: Toyo R888
Width/Sidewall-Diameter: 265/35-18 offset +45 . Only rear is my concern.
If lowered (amount): Tein SS , all the way down ..



04 6spd w BBK
Wheels - Advan Super Racing Version 2 18x8.5 front x9.5 rear ..

furnac3

uestions on Wheels
Wheel Make/Model: SSR/Type F
Wheel Size (18x9.5):
Wheel Offset (+22):
If lowered (amount): 1.75" fronts and 1.5" rears

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 04 6 speed with Brembo Brakes



What size tires would I need, and Would this setup fit? would i need to roll my fenders and will these clear brakes and will i need spacers? what camber setting do I need to run.