stillhere153

iTrader: (1)

not at all you can do springs only

here is my drop on those springs


TO PURCHASE: http://store.excelerateperformance.c.../i-176282.aspx
hond accord fitment (but fits the tl obviously)
I will heavily doubt they will clear the brembo calipers...
they fit if you add a 10mm up front and a 5mm in the rear

maninblu53

Need some help i'm buying staggered wheels 18x8 38 fronts and 18x8.5 35 for the back need to know what tires I should put on. I'm going to be lowering my 2005 TL an inch. Thanks

blacktsx05

iTrader: (1)

Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): 07 type s
Wheel Make/Model:work vsxx
Wheel Size (**X**):19x8.5
Wheel Offset (+**):+45
If lowered (amount):no finger gap in the front and 1 finger in the rear

i bought 10mm spacers for front and rear..im wondering if itll be safe? because the spacers i got isnt the bolt on spacers there the kind that just sits between the rim and the hub. so im wondering how much room i will have to put the lugs on

phee

iTrader: (5)

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto):Manual
Year/Trim (04-07, Base or Type S): base
Wheel Make/Model:racing hart j5
Wheel Size (**X**):19x8
Wheel Offset (+**):+32
If lowered (amount):lowered on coil overs

asking for someone interested in my wheels.

thanks guys

stillhere153

iTrader: (1)

235/40-18 all around
245/40-18 all around

or

stagger tires235/40-18 front 245/40-18 rear

you will have to get extended wheel studs I recommend ARP, but you will also have to get extended lug nuts or open ended lug nuts

they clear the brembo calipers

kunj.gohil

iTrader: (1)

Hey bro,
I am about to order my springs that have recommended, just want to make sure they will clear stock rims also. In the winter I plan on switching back. Also I shouldn't have any rubbing or anything right?

jvallido

ah i never knew this thread existed! lol okay here's my questioned setup..

Questions on Wheels
Wheel Make/Model:n/a
Wheel Size (**X**): 18x9.5 OR 9 (if 9.5 can't be done) all around
Wheel Offset (+**): what would you recommend all around?
If lowered (amount): 1.5 - 2 inches (will def roll rear fenders)

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Auto
Year/Trim (04-07, Base or Type S): 2008 Typ S
Wheel Make/Model:n/a
Wheel Size (**X**): see first post
Wheel Offset (+**): suggestions?
If lowered (amount): see first post

Questions on Tires
Tire Make/Model: suggestions?
Width/Sidewall-Diameter (***/**-**): suggestions?
If lowered (amount): see first post

thanks in advance!

stillhere153

iTrader: (1)

you are good to go, get an alignment 2 weeks after you install 0 out the tow... and you will save your tires... negative camber will be minimal no kit required no rubbing

I need to know what specific wheel, some 18x9/9.5 will require a +25 offset
tires would be 225/40-18 on either

if you don't want to disclose the wheel just pm me I will answer any further questions

jvallido

it's either the enkei rfp1 or the ccw classics.

chinkwapin

iTrader: (1)

ccw ftw!

604Vancity_TL

Questions on Wheels
Wheel Make/Model:Work Varianza T1S
Wheel Size (**X**):Front:19x8.5
Rear:19x9.5
Wheel Offset (+**):+22 front and rear
Do i have to roll my fenders? and what size tires should i get?

604Vancity_TL

oh crap, forgot to say that it's for a 2008 acura tl type s

buster133

OEM 06-07 Accord EX V6 rims
Wheel Size (17X6.5):
Wheel Offset (+55):
If lowered (stock height):



Bridgestone Blizzak WS60:
Width/Sidewall-Diameter (215/50 R17):
If lowered (stock height):

Will this winter time wheel/tire combo work on a 2010 Acura TSX? My sister is trading in her Accord for a 2010 TSX, so I was curious if the winter wheel/tire setup we already have now will work fine on the new TSX just for winter. I know I’ll still have to deal with the issue of TPMS sensors, just trying to plan ahead in case I have to start out fresh with new wheels & tires. Thanks

JayVee

iTrader: (21)

Vehicle: 2006 Acura TL (Base)
Wheels in question: HRE 540's/size:19x8.5/bolt pattern:5x115/offset 50et offset
With what tires ?

Do they fit? Thanks!

pozebly

Varrstoen e 2.2.2
Front 19x8.5 rear 19x9.5
offset? wth is an offset sorry for being blonde.


manual
2004 base
still working on what suspensions to get but thinking about 1.5 to 2" drop all around


tires no name brand 235 35 19 front not sure of the rear any suggestions?

stillhere153

iTrader: (1)

if you go with ccw you'd have to speak to the manufacturer about it, believe they can play around with the backspacing
as for rpf1... the x9.5 in a +30 should fit, the x9 would need a +25

yup roll the fenders all around
225/35-19 front
235/35-19 rear


no biggie clears the brakes with room to spare
yessir... that is a perfect winter setup for a tsx

the bolt pattern is incorrect, 5x114.3 is Honda/Acura
you will have to get an adapter for all 4 corners
where to buy
http://www.motorsport-tech.com/wheel_adapters.html

offset: is the number after the "+" or "et" sign on the varr toen website

19x8.5 +35 (+35 is the offset)

the rear is a problem, varr stoen
the closest that could fit is 19x9.5 +22 (but you will have to run negative camber with the rear fenders rolled)

JayVee

iTrader: (21)

sorry...WRONG! The amt is so minimum and has been cerified by several shops and has been even called SAME THING! 5x115 5x114. and 5x4.5...with 5x115 being a hair of a difference, but with a hub centric ring proper /lugsbolt... Ride and firment PERFECT! They will be fine regarding BOLT PATTERN. My main intertest or inq in my question was the 50et offset...HELP

Wheeltec.com They are local and the have confirmed. These guys KNOW THEIR SHIT and been doing this for quite sometime! Straight baller stuff! They don't even assist you (feels like) if you have some lower end stuff... Sad, but true

o4Komodo

iTrader: (2)

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): o4
Wheel Make/Model:
Wheel Size (**X**): 18x8
Wheel Offset (+**): 30
If lowered (amount): 1.75" front/1.5" rear [may want to go lower].


Will be 18x8 +30 all around. I'd like to run some wide tires too. If these fit the brembos [or let's say, wilwood/rotora front+rear BBKs], what size tire would you recommend?

revtek 2

Year: 2008
Trim: TL Type S
Color: KBP
Item you would like fitment verified: I just picked up a set of wheels and I would like to know what tires I could run on them without rubbing. The wheels are 19x8.5 +46 (front) and 19x9.5 +46 (rear). I plan on running 15mm spacers in the front and rear and I also plan on rolling my fenders all the way around.

The tires sizes I had in mind are:

235/35/19 for the front
245/35/19 for the rear

Any thoughts??

jvallido

thanks stillhere! how about tire sizing thats ideal for 18x9 or 9.5 all around?

Diesel1281

I just put these wheels on my TL today.. they look amazing.. 19x8.. i needed a 5mm spacer upfront.. looking into doing spacers all around.. ill post pics soon.. by the way my Type S is black...

Diesel1281

JUST AN FYI...

i saw a post here saying that +38mm offset would clear brembo brakes on Type S 07.. i had to get 5mm spacers for front..

Question: they told me that i need to get all around. is this really Necessary? they also told me i should get longer studs and a deeper centering ring...

wheel: Momo Strikes 19x8 38 offset
tires: Yokohama S drives 245/35/19
Car: 07 TL type S auto..

thanks in advance

Diesel1281

^^ Stock suspension. no lowering..

stillhere153

iTrader: (1)

watever you say pall, I am not going to condone putting 5x115 on a TL... no matter what wheel shop says... after all, they want to make the sale

ps. leave the 5x115 to the charger 300 and magnum

they clear the brembos 235/45-18 is the tire to run without needing to roll fenders
245/40-18 would require some minor fender mod

the tire sizes above will suit you perfect, roll the fenders after you get the tires on so you know how much needs to be done

245/40-18 with fender mods
235/40-18 with almost no fender mods needed
225/40-18 good to go

I could have told you momo's dont clear brembos off the bat

they told you to run spacers all around for the even look
and yes I'd run the longer studs, 5mm longer since you installed a 5mm spacer

n3o

iTrader: (2)

Hey Stillhere, just wanted to let you know I ended up not needing any spacers for my setup. Thanks again.

18x9 +30 Rota G-Force
245/40-18
2-2.5" drop on coilovers
No camber kits or aggresive alignment
Rear fenders rolled slightly, only rubs with heavy people sitting in back or under extreme cornering. Plenty of caliper clearence, as well as front fender and no rub lock to lock. No spacers used whatsoever, however the rear could use a 5mm for a slightly nicer stance.

stillhere153

iTrader: (1)

ah so those clear the evo brembos too then... looks pure sex man... although you are a bit overstating your drop... you aren't 2" full inches, slightly less,


ps. the concave is MONEY

n3o

iTrader: (2)

Really? I know rear has to be, I went from almost 4 fingers to ever so slightly tucking tire. Fronts I tried to match to rear drop without creating rake. And yeah man, concave is . . Oh, and caliper clearence I want to say a solid 4-6mm.

jvallido

good stuff. thanks for the info.

jvallido

oooooh got any more pics? looking good!

n3o

iTrader: (2)

my thread is in the TL picture forum.

UAeight08

i have a 2005 base.

what offset/tire size combo would i need to get 19x9.5's to fit all around? is this even possible?

car is currently lowered on H&R sport springs. drop amount is about 1.5" front and rear.

Blakvrtbeast

iTrader: (1)

18x8.5+38 up front and for the rears 18x9.5+38 ... its an 06 TL 6 speed with the big brakes ... how will they fit ?

UAeight08

Ok got the specs on the wheels I was asking about earlier.

They're 19x9.5 +40 all around. I was told I need to roll fenders front and back and maybe even pull the front fenders.

Car is lowered 1.5" and does not have bbk.

stillhere153

iTrader: (1)

I would do something between +35 and +40

the front might require a 3mm spacer or it might clear straightup... what wheel is it?

if you run 245/35-19 you won't have to touch the fenders

UAeight08

what kind of a difference would a 235/35-19 make? just a smaller profile?

Blakvrtbeast

iTrader: (1)

BBS LM's ...how would the back fit ? flush or what ? thanx

TW60

Looking to fit 19x9.5 +40 on the rear of my 08 Type-S. Will any rolling be necessary? I'd prefer to not roll them. And what tire size would be ideal to minimize necessity of rolling the fenders without going too stretched?

TW60

The tire will be narrower and have a smaller profile (diameter) as well.

TW60

Sorry, forgot to mention that I am lowered on eibach pro kit springs. Thanks.

EAMotorsports

Finally got wheels put on and now wanting to lower it. I started in the front with Tein SS Techs and it seems to drop the car a lot more than the 1.6 it says! My question is my rears are 19x9.5 with a 42 off set. Tires are 255/35/19. Dropping the rear 1.5-2 inches will it rub without a roll?

Thanks
EA