Originally Posted by groove22

Transmission: MT
Year/Trim: 08 Type S
Wheel Make/Model: 5 Zigen ZR 520
Wheel Size: 17x9 or 18x8.5
Wheel Offset:+37/+27 for the 17, +37/+47 for the 18
If lowered (amount): H&R Sport


17x9 +27

18x8.5 +37


Transmission: MT
Year/Trim: 08 Type S
Wheel Make/Model:Tenzo Type M V2
Wheel Size:18x8
Wheel Offset: +45
If lowered (amount): H&R Sport


18x8 +45 would require a 10-15mm spacer believe they have a lower offset that you can get with just a 5mm spacer


These two wheels have been posted before but I am not going that aggressive of a set up. Thanks for the help.

Allen

Originally Posted by TimTim

Wheel Make/Model: RH Evo Pro J8
Wheel Size (**X**): 19x9
Wheel Offset (+**): +26
If lowered (amount): Lowered about: 1 1/4" front and rear.

I'm running a 245/35/19 tire, wondering if the TPMS will fit?

Originally Posted by princelybug

TPMS will fit 100%.

If it doesn't just screw in, you can always get sensor straps from ANY tire store, or get TPMS adapters from iForged. It WILL work.

Originally Posted by 04_tl_driver

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 2004
Wheel Make/Model: Speedy Wheels Lite Fin
Wheel Size (**X**): 18x7.5
Wheel Offset (+**): ?
If lowered (amount): Stock

Hit a massive pothole need to order soon.
Any suggestions on other wheels like these would also help.

Thanks.

Originally Posted by 04_tl_driver

I have a few more wheels I am looking at.

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 2004 Brembo
Wheel Make/Model: Ruff Racing R 350
Wheel Size (**X**): 18x7.5
Wheel Offset (+**): ?
If lowered (amount): Stock

NO


Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 2004 Brembo
Wheel Make/Model: Lite Speed the DTM
Wheel Size (**X**): 18x8
Wheel Offset (+**): ?
If lowered (amount): Stock

offset would have to be between +30 and +35


Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 2004 Brembo
Wheel Make/Model: Raze R-51
Wheel Size (**X**): 18x7.5
Wheel Offset (+**): ?
If lowered (amount): Stock

NO

Any other suggestions would be a huge help.

Thanks.

Originally Posted by Matt HKD

04 auto tl
stock height
volk te 37
19x8.5/9.5 rear
+34/30 rear
245/35 and 265/35 tires

Originally Posted by aztec209

Transmission: AT
Year/Trim: 04 TL
Wheel Make/Model: Roderick Cingue
Wheel Size: 19x8.5 Front and 19x9.5 Rear
Wheel Offset: +35 All Around
If lowered (amount): TEIN S.Tech Lowering Springs (SKA52-AUB00)
Avg Lower: F(2.0"), R(1.2")
Thinking of running 235/35 on the front and 245/35 on the rear.

Originally Posted by KamoteQ

04 TL Auto
Eurosport Euro 6
Offset +35
No DDrop - Stock Suspension
19 x 8.5 Front --- 245/40/19
19 x 9.5 Rear --- 265/40/19 or 275/35/19 or 255/40/19 or whatever you think will be best matching look in the front.


I've seen guy here with 20" rims with 245/35/20 so I'm wondering if my above tires will work for the 19" rims.

If the 19 x 8.5 -- 245/40/19 will fit in the front without dropping the suspension what would be the closest (or the best matching look) for the rear between the three tire choices above. I would prefer to have the same hight of the tires as the front without having the lip of the rims sticking out.

Thanks in advance.

Originally Posted by stillhere153

in the front 245/35-19 is what can be installed... any other size will throw off the speedometer

for the rear 19x9.5 +35 I would also run 245/35-19... if you run 255/30-19 or 255/35-19 even at stock height you may need to roll the rear fenders

Originally Posted by KamoteQ

Sorry to keep bothering you. I thought I was set until I heard something about the "centre bore" of the wheel.

The rims I'm getting is coming from a maxima and everything is the same except the "centre bore". The maxima has a stock center bore of 66.1 while the TL has a stock center bore of 64.1. Is this going to be a problem?

Originally Posted by horsepowercrzy18

shouldnt be a problem since i have altima se-r wheels on my car

Originally Posted by bzyrice

04 TL with Brembos.. Lowered on Tein SS
Work Emotion CR Kai's|18x9.5 +20/+30
255/35/18

Originally Posted by n3o

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 2004 Brembo
Wheel Make/Model: MB Weapon
Wheel Size (**X**): 18x9
Wheel Offset (+**): 38
If lowered (amount): H&R Sport

Going to run 245/40/18's too. Don't think it will rub and since its wider and lower offset I'm assuming its gonna clear?

http://www.discounttiredirect.com/di...van&tmn=Weapon

Originally Posted by stillhere153

clears the brakes but that tire is a little too wide unless you raise your ride to allow for clearance and run camber kit.... evo fitment



those wheels will likely require a 10to15mm spacer to clear

Originally Posted by aztec209

Transmission: AT
Year/Trim: 04 TL
Wheel Make/Model: Roderick Cingue
Wheel Size: 19x8.5 Front and 19x9.5 Rear
Wheel Offset: +35 All Around
If lowered (amount): TEIN S.Tech Lowering Springs (SKA52-AUB00)
Avg Lower: F(2.0"), R(1.2")
Thinking of running 235/35 on the front and 245/35 on the rear.

Originally Posted by n3o

Whats the lowest offset on a 9" wide wheel I can run clearing the brembos but being a few mm short of flush or just flush?

Originally Posted by Sofa King Slow

Questions on Tires

Tire Make/Model: Any
Width/Sidewall-Diameter (265/40-17):
If lowered (amount):Wife won't allow it.

Just bought the car. Got an alignment at work. While it was on the rack, I checked the front for clearance. Looks like plenty of room, just want to be sure. I don't like the stretched look of the 235's.

Originally Posted by vc123

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): base + rotora 4 pot bbk front and rear
Wheel Make/Model: work emotion cr kai
Wheel Size (**X**): 18x9.5
Wheel Offset (+**): 38
If lowered (amount): near no gap

will it clear my bbk?
what tires should i run?
do i need fender mod?

Originally Posted by vc123

Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): auto
Year/Trim (04-07, Base or Type S): base + rotora 4 pot bbk front and rear
Wheel Make/Model: work emotion xd9
Wheel Size (**X**): 18x9 F, 18x10R
Wheel Offset (+**): + 38 F + 38 R
If lowered (amount): near no gap


will it clear my bbk?
what tires should i run?
do i need fender mod?

Originally Posted by aztec209

Would It still be Ok if I went with 19x9.5 wrapped with 245/35 tires all the way around? Same offset +35 too?

Originally Posted by ThaiBruin

Transmission: MT
Year/Trim: 05 TL
Wheel Size: 19x8.5
Wheel Offset: +22 All Around
If lowered (amount): Considering A-Spec (stock now)
Tire Size: I'd like 245/35/19 all around

Will I need to roll all 4 fenders? Will this do long term damage to suspension (stock or A-Spec)?

Originally Posted by davewhodavedunn

here is my question. I want to run a 20inch Dai Beast Wheel on my 06 TL. They are the following specs.

20X8.5 ET:35 OR 20X9.0 ET:+38
Tires: 225,30,20, or maybe 245,35,20

Originally Posted by davewhodavedunn

I forgot to mention, my car is a automatic, and not lowered, and will never be lowered.

Originally Posted by stillhere153

that tire will not work, 225/40-19 will

Originally Posted by ThaiBruin

So if I get these tires, it won't require fender rolls? If I get the A-Spec suspension, will I need to roll my fenders then?

Originally Posted by davewhodavedunn

The thing is, if I am rolling on 20's I want to have a 35 series tire front and back as 30 series are just insanely skinny....can I do that?

Originally Posted by dc2_mynutz

Year: 04
Trim: Base
Color: blk
Item you would like fitment verified: will these wheels fit. BBS LM 18x9 +40 18x10 +50.

Originally Posted by stillhere153

that's correct no modifications required, you'd need to roll fenders if you went lower than 1.5" and you're not going lower than that with aspec

Originally Posted by davewhodavedunn

what if I run a 245, 35, 20? does this make the tire's thicker,

if so that is what I want with no rubbing with my oem suspension. I just don't want rubberband tires because I might damage the rims.

Originally Posted by ThaiBruin

That sounds great! However, the very few threads I've seen where people do have +22 wheels, there's always talk of "poke", which I take to mean, the tire/wheel going beyond the fender. Assuming I get the tires (225/40/19) w/ or w/out the a-spec kit, will the wheels exhibit "poke"? Will the only way to get rid of the "poke" be to lower it further and get a camber kit?

Sorry for so many questions, I got a killer deal on my wheels, but am considering selling them if it ends up being too much trouble or ends up looking silly when mounted.

Originally Posted by vc123

thanks for the help!
another question
my car is lowered, but the rear has a camber kit so the camber is in stock spec
do i need to dial in some - camber to fit this?

Originally Posted by dc2_mynutz

thanks for the help. stillhere153
what tire size would you recommend with this setup?

Originally Posted by alexSU

CAR: 05 TL 6MT
WHEELS: HRE 540R
LOWERED: TEIN SPRINGS

Fronts
19x9 24mm offset 2inch lip

Rears
19x10 25mm offset 3.5 inch lip

Will they fit?