The definitive LED thread: All you'll ever need to know about LED's 3G Garage #G-076
#322
NOT my TL or ME
Join Date: Jul 2008
Location: AtLaNtA, GA
Age: 44
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
i took off the factory clear plastic door light cover off and drilled a couple holes in the bottom portion (same diameter holes as blue led bulb.
I will post some pics, but it looks sick as fuck!!! like puddle lights that move as the doors are opened....
makes me feel like im stepping out of the car onto the red carpet...
lmao
I will post some pics, but it looks sick as fuck!!! like puddle lights that move as the doors are opened....
makes me feel like im stepping out of the car onto the red carpet...
lmao
#323
Thanks!
#324
Advanced
Join Date: Dec 2008
Location: Alpharetta, GA
Age: 41
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
FUCK ME! I wanted some new license plater LED. So I got these multi socket LEDs from VLED and come to find out they use the adapter plugs with the wire like this...
Can we use these anywhere else on our vehicles?
This what I should have got.
Can we use these anywhere else on our vehicles?
This what I should have got.
#326
Advanced
#327
Ok changed some LEDs yesterday and ran into some problems.
The door lights were installed fine. I used the WLED-xHP6 Wedge Base Bulb from superbright for both my map and dome lights. The rear lights worked fine. But when I installed them on the front map lights, the fuse kept blowing. And yes everything was off and the fuse was even taken out when I installed all the lights. Any solution to this? or should I go with a different LED?
The door lights were installed fine. I used the WLED-xHP6 Wedge Base Bulb from superbright for both my map and dome lights. The rear lights worked fine. But when I installed them on the front map lights, the fuse kept blowing. And yes everything was off and the fuse was even taken out when I installed all the lights. Any solution to this? or should I go with a different LED?
#329
Can anyone tell me which of these would be the brightest for the center console? I only see specs for one and I'm not sure it will fit.
http://www.v-leds.com/Shop/Control/f...m/1/menu_num/2
http://www.v-leds.com/Shop/Control/f...m/1/menu_num/2
#330
Can anyone tell me which of these would be the brightest for the center console? I only see specs for one and I'm not sure it will fit.
http://www.v-leds.com/Shop/Control/f...m/1/menu_num/2
http://www.v-leds.com/Shop/Control/f...m/1/menu_num/2
Go with the ones from Superbright..the ones from V-leds aren't as good. check out this post from another thread
https://acurazine.com/forums/showpos...6&postcount=23
Product: 74-xHP3 Wedge Base LED bulb $ 3.49 (each)
Options: Cool White 74-CWHP3
https://acurazine.com/forums/showpos...6&postcount=23
Product: 74-xHP3 Wedge Base LED bulb $ 3.49 (each)
Options: Cool White 74-CWHP3
#331
Black Mamba
Join Date: Dec 2005
Location: So Cal ~818~
Age: 42
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
06 Switchbacks
For the V-Leds switchbacks for an 06 TL, when you're signaling, does the turn signal alternate between white and amber, or does the white completely turn off with only the amber blinking? I know they have this option for the switchbacks for the type s (version 2) but I wasn't sure if it was the same for the 7443 bulbs for the 06.
#332
Racer
Join Date: Apr 2007
Location: Charlotte, NC
Age: 44
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
ok so i recieved my order from V-LED's yesterday, i purchased these:
V-LEDS HID WHITE 8 M-SMT 4W HIGH POWER BULBS 194 168 158 921 912 for my license plate and these:
2 HID WHITE SMT 5 LED LIGHT BULBS 194 168 158 2821 for my reverse lights.
the license plate bulbs are crazy bright, just what i was looking for, as for the reverse lights, not so happy with them. the light output isnt near what i thought it was going to be or near the amount of light needed to back up in dark conditions. maybe ill try and switch the bulbs and 'see' how that works.
P.s. **i may have a pair of reverse lights (2 HID WHITE SMT 5 LED LIGHT BULBS 194 168 158 2821) for sale in the near future**
V-LEDS HID WHITE 8 M-SMT 4W HIGH POWER BULBS 194 168 158 921 912 for my license plate and these:
2 HID WHITE SMT 5 LED LIGHT BULBS 194 168 158 2821 for my reverse lights.
the license plate bulbs are crazy bright, just what i was looking for, as for the reverse lights, not so happy with them. the light output isnt near what i thought it was going to be or near the amount of light needed to back up in dark conditions. maybe ill try and switch the bulbs and 'see' how that works.
P.s. **i may have a pair of reverse lights (2 HID WHITE SMT 5 LED LIGHT BULBS 194 168 158 2821) for sale in the near future**
#333
So I just got my interior dome and door LEDs from superbrightleds.com and was changing them out. For some reason the rear passenger dome light does not come on though. I tried all four LEDs in there and none of them worked, but they work fine in other three dome lights. I also put back in the original factory lightbulb and that worked just fine, so I'm at a loss when it comes to troubleshooting this any further.
I thought I remembered hearing this problem in one of the other threads on changing out LEDs, but there are so many freakin posts I couldn't remember where I found it. Any suggestions would be appreciated!
I thought I remembered hearing this problem in one of the other threads on changing out LEDs, but there are so many freakin posts I couldn't remember where I found it. Any suggestions would be appreciated!
#334
10th Gear
Need HELP, Rodando Red
So I just got my 04 TL, and it's Rodando Red with tan leather, does anyone have suggestions on colors for LED's? I have always loved the pure super white LED's, but if anyone has other suggestions for my color, please let me know. ALSO, I have no idea how many LED lights I need, nor where to order them for, so if anyone could, just please give me the basic run down on what to order (part number from websites) and to where the belong (dome, tail-light, etc.)
I know this thread explains it all, but it's taking me forever to filter through everything to comprehend it, so I figure I would type this up.
Your help will be greatly appreciated for this Acura Noob. =/
I know this thread explains it all, but it's taking me forever to filter through everything to comprehend it, so I figure I would type this up.
Your help will be greatly appreciated for this Acura Noob. =/
#335
07 tl-s in
hey man that is what i want to do to my 2007 TL-Type S. Could you give me the site for where you got them from and the size. i dont want to buy the wrong led. did you get them from v-leds.com? if so i just need the # of the led because i was reading thread and it says that some of the led from v-led dont fix right.
Thanks!
Thanks!
6led wedge door
tower's: 18 bulb front dome 12 bulb rear(both tight fit)
flank's in vanity/trunk,
a 5 bulb in the lic plate.
the glove/center console is a diff bulb(forgot the # it's a little f*cker mentioned in here somewhere) and 18 bulb reverse tower....
#336
07 tl-s in
all from V-led off ebay but check the thread about the 15% discount. I'm running a 194/168:
6led wedge door
tower's: 18 bulb front dome 12 bulb rear(both tight fit)
flank's in vanity/trunk,
a 5 bulb in the lic plate.
the glove/center console is a diff bulb(forgot the # it's a little f*cker mentioned in here somewhere) and 18 bulb reverse tower....
6led wedge door
tower's: 18 bulb front dome 12 bulb rear(both tight fit)
flank's in vanity/trunk,
a 5 bulb in the lic plate.
the glove/center console is a diff bulb(forgot the # it's a little f*cker mentioned in here somewhere) and 18 bulb reverse tower....
#338
What brand and size are thoose? i wanna get the 6led red from vleds.com and the 9led red door bulbs fro vleds.com
http://www.v-leds.com/Exterior-LED/B...81094-1-2.html door
http://www.v-leds.com/Interior-LED/D...-p6053723.html dome
will thoose 6led dome lights be as bright and nice as yours?
The 9led doors should be fine im not worried about that.
Help me out
http://www.v-leds.com/Exterior-LED/B...81094-1-2.html door
http://www.v-leds.com/Interior-LED/D...-p6053723.html dome
will thoose 6led dome lights be as bright and nice as yours?
The 9led doors should be fine im not worried about that.
Help me out
#341
contemplating future mods
iTrader: (4)
I was reading through the posts and I'm beginning to get a headache. I want to change the amber and the red output of the sidemarkers to white. Is this possible? My searching led me to the 1157 LED. is that right or am I barking up the wrong tree.
Thank you in advance
Edit... I see that 1157 is for the turn signal... I guess I'll just live with what I have.
Thank you in advance
Edit... I see that 1157 is for the turn signal... I guess I'll just live with what I have.
Last edited by Morrissey25; 07-29-2009 at 05:53 PM.
#345
looks these bulbs are cool...
if i put LED bulbs in the interior, do i have to change also or increase the fuse value?
thanks....
#346
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
From another thread - FYI/FWIW.
https://acurazine.com/forums/3g-tl-photograph-gallery-96/got-new-leds-727034/#post10909753
From one of our new vendors, StatikPerformance. Check him out in the Group Buy/Vendor section of the Black Market.
Front Dome Install Close Up (note wires pushed back behind reflector):
Front Dome SuperLumination Super Star vs 6 LED Board:
Front Dome SuperBrightLED's W-LED 6 v 6 LED Board:
Rear Dome SuperBrightLED's W-LED 6 v 6 LED Board:
Both Rears Domes Installed:
Both Front Domes Installed:
Trunk Before (WLED 9 LED from SuperbrightLED's):
Trunk After (Statik Perf 6 LED Board):
The blue "hot spots" aren't quite as blue as they look. I guess they are from the combination of 6 LED's and the lens.
License Plate Before (Autolunination SuperNova SMT):
License Plate After (Statik Performance 1W SMT):
Not much difference in person. Before the SuperNova, using the 6 or 9 WLED, I had maddening flicker problems. SuperNova did NOT flicker. Hopefully, the Statik LED's won't either.
Overveiw shots (2 with an over-head garage light on):
No flash for any of the pics I've posted in this thread.
(yeah, yeah, yeah .... Vacumm the Trunk .... blah, blah, blah. :wink: )
Front Dome Install Close Up (note wires pushed back behind reflector):
Front Dome SuperLumination Super Star vs 6 LED Board:
Front Dome SuperBrightLED's W-LED 6 v 6 LED Board:
Rear Dome SuperBrightLED's W-LED 6 v 6 LED Board:
Both Rears Domes Installed:
Both Front Domes Installed:
Trunk Before (WLED 9 LED from SuperbrightLED's):
Trunk After (Statik Perf 6 LED Board):
The blue "hot spots" aren't quite as blue as they look. I guess they are from the combination of 6 LED's and the lens.
License Plate Before (Autolunination SuperNova SMT):
License Plate After (Statik Performance 1W SMT):
Not much difference in person. Before the SuperNova, using the 6 or 9 WLED, I had maddening flicker problems. SuperNova did NOT flicker. Hopefully, the Statik LED's won't either.
Overveiw shots (2 with an over-head garage light on):
No flash for any of the pics I've posted in this thread.
(yeah, yeah, yeah .... Vacumm the Trunk .... blah, blah, blah. :wink: )
https://acurazine.com/forums/3g-tl-photograph-gallery-96/got-new-leds-727034/#post10909753
#348
Drifting
#349
must be nice to be able to get free shipping in the US for vled and superbrightleds....
i have to pay 40 bucks on top of the initial price. since i'm in canada.
btw, if you order from superbright LED from Canada, make sure you get UPS EXPRESS. it will save you the 20 dollars UPS charges you for brokerage fees for UPS ground.
i have to pay 40 bucks on top of the initial price. since i'm in canada.
btw, if you order from superbright LED from Canada, make sure you get UPS EXPRESS. it will save you the 20 dollars UPS charges you for brokerage fees for UPS ground.
#350
I have been searching for hours and researching and can't come up with a final decision on what to get, so I figured I would just ask it.
What would be good LEDs to get from superbright that would simply replace the stock lights.
I'm looking to get white LEDs but I don't want them too bright, probably just as bright as the stock.
Would the 4x wedge bulbs be too bright?
Thanks!! Much appreciated, I am definitely excited to do this project!
What would be good LEDs to get from superbright that would simply replace the stock lights.
I'm looking to get white LEDs but I don't want them too bright, probably just as bright as the stock.
Would the 4x wedge bulbs be too bright?
Thanks!! Much appreciated, I am definitely excited to do this project!
#351
would this work?
WLED-x4 LED bulb
90 degrees
4 for domes
2 for doors
2 for vanity
or for the front domes would it be better to get these bc of the wide angle:
WLED-x5 LED Wide Angle LED bulb
Again, I don't am looking to just replace the color, not the brightness of the stock lights.
Thanks!
WLED-x4 LED bulb
90 degrees
4 for domes
2 for doors
2 for vanity
or for the front domes would it be better to get these bc of the wide angle:
WLED-x5 LED Wide Angle LED bulb
Again, I don't am looking to just replace the color, not the brightness of the stock lights.
Thanks!
#352
would this work?
WLED-x4 LED bulb
90 degrees
4 for domes
2 for doors
2 for vanity
or for the front domes would it be better to get these bc of the wide angle:
WLED-x5 LED Wide Angle LED bulb
Again, I don't am looking to just replace the color, not the brightness of the stock lights.
Thanks!
WLED-x4 LED bulb
90 degrees
4 for domes
2 for doors
2 for vanity
or for the front domes would it be better to get these bc of the wide angle:
WLED-x5 LED Wide Angle LED bulb
Again, I don't am looking to just replace the color, not the brightness of the stock lights.
Thanks!
ballers and replacements..
those with money can pay 16-30 bucks for their multiple smd led boards.. and those that want the best bang for buck..
for those with superbrightled questions.
here is the LED you need for the dome, vanity, map lights
i got them in white.
what it looks like in my car.
Those with the rear dome light issue, pull the pins out of the leds a little and make sure they are nice and snug. turn the bulb around if you need to. verify that the bulb is pushed all the way into the socket. i had this problem and this fixed it for me.
for the trunk, i'd go with the vled boards, or go with this one
i think i'll be ordering one of these soon because i bought the t3 directional one for the trunk and i only light up half of my trunk
for the doors, i'd suggest getting WLED-xHP5 because it depends on what you want.. a spot light or something to fill the lense and omit a glow. i got the directional one for the door lights and they are bright and spotlight fine in the dark, but it doesn't fill the lense properly. i found out it's the same as the dome/map lights so you're good to go for that.
reverse light, same thing with teh doors, do you want a bright spot light or something to fill the lense.. they are the same connection type as the other lights, so if you want to fill in the lense, then a 360 bulb will do, but if you want a spot, i used these
they are plenty bright, but they have a hot spot and does not fill the lense completely.
the license i used the 921-x9 and it came out pretty good, the bulb mount itself is angled. so you will shine your bumper and the ground a long with your plate. it lights up most of the top of the plate. it's pretty good though but it's hard to judge though.
if i were to change anything here's what i'd get
wled-xhp5
2x dome, 2xvanity, 2xmap, 2xdoors, 2xreverse lights
wled-xhp6 d
1xtrunk
921-x9
2x license plate
#353
Quick edit: i found the thread to be more about vled led boards then the superbrightled mini wedge 194. i hope my post helped someone because there was no definitive answer for the superbrightled alternative to the VLED leds. also, vled shipping to canada was ridiculously expensive. The thread is hard to look through when you're trying to find an answer. and no one ever response to questions.
#354
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
.....
the license i used the 921-x9 and it came out pretty good, the bulb mount itself is angled. so you will shine your bumper and the ground a long with your plate. it lights up most of the top of the plate. it's pretty good though but it's hard to judge though.
....
921-x9
2x license plate
the license i used the 921-x9 and it came out pretty good, the bulb mount itself is angled. so you will shine your bumper and the ground a long with your plate. it lights up most of the top of the plate. it's pretty good though but it's hard to judge though.
....
921-x9
2x license plate
In the license plate, these bulbs tend to flicker after a relativly short period of time. Look for something with a single LED and a heat sheild, like the SuperNova Kennedy suggests; they seem to last longer.
#357
Drifting
iTrader: (13)
As long as you are only replacing stock bulbs in normally accessible locations (i.e.: map/dome lights, vanity lights, etc. If you are looking to replace the bulbs in your dash or steering wheel, you do need resistors.
#358
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
#359
Hey CdTrix, your post regarding the LEDs was helpful for me. I've a request. Can you take pictures of your car with the LEDs on at night (completely dark would be nice) and post the pictures here? I want to see what the superbrightled mini 194 looks like and how bright they are at night time.
#360
What type of LED bulb do I need for interior dome lights!!
Hi guys,
I wanna know what is the model number for the 4 interior dome lights. I wanna change it with LED lights.
I searched on the forum but I didn't find the model number for LED interior dome lights.
You can send me link via ebay or via vleds.com
Need help!
Thanks
I wanna know what is the model number for the 4 interior dome lights. I wanna change it with LED lights.
I searched on the forum but I didn't find the model number for LED interior dome lights.
You can send me link via ebay or via vleds.com
Need help!
Thanks