^ you have the sides and the rear a-spec right? The front is just an ebay lip, not too many of them out there, and not a TOTAL failure, but still a-spec is nicer. for the kit locally, contact this guy: krisalbertsalumbides@yahoo.com, he gave me some prices for the side skirts and the prices matched what I would have paid from US.

 

just curious.. how much do you guys usually pay for a service B?

 

It looks like it, But I'm not 100% sure it is.
For sure you guys will know in a heartbeat haha, Im still learning all about this car

 

What is service B? Timing belt? I just did mine and I got someone to do it for free and I just got the parts. But if you go to the shop they want around 600-800$ with parts. If that's service B, if not, I don't know haha

yea you got the a-spec, very nice. Just get the regular front and you are good to go.

 

according to my service sheet.. Service B is oil change, oil filter change, brake inspection, exhaust inspection, cv boots, tie rods, tranny fluid, steering column, tire rotation.

 

oh sorry I don't know I do most of those things myself

 

Mike, I remember Millwoods Honda did that to my Accord for around 250$. If u bring it to an Acura dealership, it will be more expensive.

 

got a wedding on the 27th...i can do 28th for a meet...
how many of you guys actually wanna do a meet? seems like only a few people are interested...

 

when is this? july 21st?

1. Arthur
2.

 

dude, it's august already haha I am down for a meet if there is a few guys showing up. On the 28th there is a honda meet at hawerlak at 6pm

 

shit. hahaha. my bad, august 21st! yea!

and the honda meet is on august 27th!

 

actually i did pay $250 for that service. Was just curious to see if that was correct or not

 

Good to know that they are the same, which dealership did you go? My maintenance minder is almost up for a B service as well.

 

i can only go on the august 21 one .

 

Went to Southview. They have a board in their lounge area that compares their prices to competitors and they seem to have the cheapest prices for service.

 

im going to vanc again till the 22nd, after that im good to come... 27th i should be able to make it!

 

hmm I probably won't be able to make much this month. Calgary this weekend and I work all weekend the next before I'm gone to Vancouver and Seattle for a week.

 

I might be able to make the 21st. Where at?

 

Where do you guys get your lip kits installed?

 

we do it ourselves. That's the only way you can be 100% sure that no one is gonna use wood screws to install the lip kit hahaha

but seriously, most of us did it outselves.

 

That is what I was thinking of doing tomorrow. Going to paint today and install tomorrow..my kit didn't come with any installation hardware tho. What kind of screws and what not do I need?

 

where did you get teh kit from? I am not sure how the TSX kit bolts up to the car, and do you have instructions on how to do it? Search through the TSX side of the forum, I am sure there are instructions posted somewhere.

 

Got it from another TSX owner brand new never installed for $400 shipped. Kit came in black primer..Its a Mugen Style Lip kit. Don't think it came with instructions either but it doesn't seem too difficult to install. Read through a couple DIY threads. I've got a couple buddies that are going to be helping paint and install with me but I'm unsure on what kind of sized screws and clips I'll be needing.

 

Sanjay, aren't you going to dmcc?

 

From what I recall on my tsx, my lips were screwed in where mud flaps would go and the rest was secured by 3m doublesided tape.

Nah, too much walking for my knee atm. I might hit up the pentiction event though, dunno yet.

Not sure how I separated this subframe mount, which is now fixed



Same with new front brakes

Tops are new in comparison to what was left on the factory bbk. The passenger side was worse

 

Random shot of the led drls, led switchbacks and 8k hid fogs

 

Looks sharp Sanjay. Damn that reminds me I really need to install my DRL kit. Have you had any problems yet installing without those gold resistors or whatever they were?

I got all my lights in now so I have to find a day to tackle everything at once. Swap headlight bulbs to 6K, install 6K DRL kit, install zkw-r lenses, cf wrap amber diffuser in headlight, black out chrome strip in headlight, install 6K fog light kit, and fix cracked foglight. Anyone willing to help me take off my front bumper and bake my headlights?

 

Not a single problem.

 

Hey out of curiosity. Would any members be interested in getting acurazine or 3G TL etc t-shirts or goodies made? I have a buddy who owns a clothing company and He does a lot of custom work and for car forums and such. Is this something that interests you guys?

 

i am!

 

I would like a 3G tl shirt, like a sweet outline of one maybe. Not acuraZine though, that's kind of gay.

 

So, are we still going to meet?

 

i am down more decals and shirts!!

BTW whats with the meet for tom? aug 21?? anything happening?

 

Same question here. No idea whats going on though if anyone wants to show up then maybe I'll stop by too. I don't personally know any other edmonton acura owners.

 

Yeah a 3G TL shirt would be cool.

Is there still a meet tomorrow? Time, location?

 

Let's try this, Tim Hortons near UC again? 4pm?

 

Sure I'm down.

1. Arthur
2. Vincent
3.
4.
5.
6.
7.
8.
9.
10.

 

I'll try to make it

1. Arthur
2. Vincent
3. Taylor
4.
5.
6.
7.
8.
9.
10.

Wheres UC tims?

 

United cycle? Gateway blvd near whyte

 

Oh makes sense, thats a good one. I'm not new to edmonton anymore but I don't get out much so now I know :P