Any Dallas area meets? - July 22 (Thread Retired)
#3201
Originally posted by SAY22CL
Will yall check out my lil custom electric CAI system i made, lemme know what you think... It's basically all 3" PVC piping. The electric blower is 4", it's the part you see between the 2 rubber 4x3" reducers. This thing actually has given me a pretty good gain. It's better than my AEM CAI, sooooo i'm happy. Right now the filter is down in the passenger side of the bumper, attached to a 2" PVC 90* elbow. I think that may be a bit too restrictive. I had the K&N just sitting behind the front headlight duct taped to the 3" PVC piece and I think it was better like that. Well, give me some suggestions. I need to paint it, anyone know how to paint PVC? Special paint or something?
Will yall check out my lil custom electric CAI system i made, lemme know what you think... It's basically all 3" PVC piping. The electric blower is 4", it's the part you see between the 2 rubber 4x3" reducers. This thing actually has given me a pretty good gain. It's better than my AEM CAI, sooooo i'm happy. Right now the filter is down in the passenger side of the bumper, attached to a 2" PVC 90* elbow. I think that may be a bit too restrictive. I had the K&N just sitting behind the front headlight duct taped to the 3" PVC piece and I think it was better like that. Well, give me some suggestions. I need to paint it, anyone know how to paint PVC? Special paint or something?
#3202
I just found out the OZ 17" wheels won't fit the Brembo kits.
But...I found out the 17" SSR Competitions will fit the kit and are beautiful. Not only that, they weigh 12.9 lbs!!!
So here they are:
Anyone want to vote no? Didn't think so...
I wonder who is going to be ordering wheels soon?
Inferno
But...I found out the 17" SSR Competitions will fit the kit and are beautiful. Not only that, they weigh 12.9 lbs!!!
So here they are:
Anyone want to vote no? Didn't think so...
I wonder who is going to be ordering wheels soon?
Inferno
#3207
Suzuka Master
Originally posted by mantis23
Danny, the stupid UTA server is down again :/
Danny, the stupid UTA server is down again :/
#3209
Still trolling
Nice. I just sold my SLR and bought the Canon S30 Digicam and 128MB CF card (I hate CF), but the camera is ranked as one of the best and so far, the image quality is unbelieveable.
#3211
Originally posted by danny25
I Photoshop, I just wish I knew how to do everything in it. I was playing around and did this, check it out...
Original...
PSed...
I Photoshop, I just wish I knew how to do everything in it. I was playing around and did this, check it out...
Original...
PSed...
#3212
SHIFT_god
Join Date: Oct 2001
Location: Dallas, Tx
Age: 41
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by danny25
Casper, those lights are gonna look good. When I first saw the pic of them I kinda cringed thinking you were gonna put in all clears. I'm glad you're gonna do half of it red, that will look sweet.
Casper, those lights are gonna look good. When I first saw the pic of them I kinda cringed thinking you were gonna put in all clears. I'm glad you're gonna do half of it red, that will look sweet.
A Maxima buddy of mine got the chance to make it to the Honda meet sat night and claimed it was a fairly big turnout. He got to meet a guy that reconditions Skylines, and brought one to the meet. I was a bit too busy chillin in Lower Greenville, but i'm kinda disappointed.
#3213
Suzuka Master
Originally posted by chrisbpickering
Nice. I just sold my SLR and bought the Canon S30 Digicam and 128MB CF card (I hate CF), but the camera is ranked as one of the best and so far, the image quality is unbelieveable.
Nice. I just sold my SLR and bought the Canon S30 Digicam and 128MB CF card (I hate CF), but the camera is ranked as one of the best and so far, the image quality is unbelieveable.
#3214
Suzuka Master
Thanks Inferno, I've just barely scratched the surface with photoshop, I need to find a class at the local community college that teaches it or something like that.
#3215
Advanced
Join Date: Dec 2001
Location: Dallas
Age: 40
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
oops, i hadn't checked this site for a while... I bought my own. I figured out that that electric supercharger site just sells in-line blowers for boats, to expell gas fumes. So I went to West Marine and bought one for $29.99 instead of paying $299...
#3216
Advanced
Join Date: Dec 2001
Location: Dallas
Age: 40
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
If anyone is good with electric motors or anything and knows how to maybe swap the little motor in my blower and but a bigger/more powerful motor in lemme know. Or if anyone is interested in helping me play with this lemme know. The motor on it right now is 7 amps, i forget how many watts, not too many, but it blows 240cfm of air. I wish it did more and it would be cool to have a bigger engine for it to blow more...
#3217
Still trolling
Originally posted by danny25
Sounds cool, that's a 3mp camera right? What's wrong with CF cards?
Sounds cool, that's a 3mp camera right? What's wrong with CF cards?
But oh well, here is a pic at medium resolution (1600x1200, low compression but not raw), first night with new camera:
[pick removed for the bandwidth challenged]
It also does automated panoramic stiching, allowing you to take one shot, keep it in view, and take as many additional shots, lining it up on the display. It works up, down, side to side, and all of the above.
#3220
Still trolling
Yeah, I was impressed. I can bump it to high quality for like 22xx by 16xx or something. At the medium setting like above I can ft 123 images. It does 320x240 videos too, but thats what my DV camcorder is for @720x480.
#3221
Still trolling
So whats up fellas. How about a gathering in the near future? Maybe some car talk in the p-lot at a hooters somewhere with some brews shortly there after?
I vote for a spot centralized in the Irving/Grapevine area so everyone has somewhat of an equal driving distance.
I vote for a spot centralized in the Irving/Grapevine area so everyone has somewhat of an equal driving distance.
#3222
StOHC Automatic Club
Join Date: Mar 2002
Location: UNT/The Woodlands
Age: 43
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
When's the next meet? I wish I wouldve seen that about the Hooters earlier, i havent checked this in awhile. I live about 20 minutes away from that Hooters in Lewisville. Let me know.
#3223
SHIFT_god
Join Date: Oct 2001
Location: Dallas, Tx
Age: 41
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Ya know my a$$ is always up for a meet! If we plan in a fair amount of time I'm sure I can get DuckBlue to come along...
For those of you that remember, I saw that 1st gen 3.0 CL again last night as he was driving through a parking lot. I kinda tried to flag him down but didn't try very hard, so I didn't care. I figure he lives in the Richardson area. Gotta meet this guy!!!!
Oh well, meet sounds good and I agree with the location seeing as how we gots a lot of people who live out in BFE Arlington j/k.
CasperTL
For those of you that remember, I saw that 1st gen 3.0 CL again last night as he was driving through a parking lot. I kinda tried to flag him down but didn't try very hard, so I didn't care. I figure he lives in the Richardson area. Gotta meet this guy!!!!
Oh well, meet sounds good and I agree with the location seeing as how we gots a lot of people who live out in BFE Arlington j/k.
CasperTL
#3226
Still trolling
I don't know about this weekend since no one else has chimed in yet.
I am trying to get this in Irving or Grapevine so us on the West side have an equal distance to drive. Lewisville makes it a solid hour drive for me.
I am trying to get this in Irving or Grapevine so us on the West side have an equal distance to drive. Lewisville makes it a solid hour drive for me.
#3227
Suzuka Master
This weekend could work for me, but if we plan ahead for one down the road we'll get a bigger turnout. Once everyone here chimes in on what's good for them, we can pick a good time and place.
#3229
Moderator Alumnus
Join Date: Mar 2001
Location: Carrollton, Texas
Age: 46
Posts: 17,856
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by danny25
This weekend could work for me, but if we plan ahead for one down the road we'll get a bigger turnout. Once everyone here chimes in on what's good for them, we can pick a good time and place.
This weekend could work for me, but if we plan ahead for one down the road we'll get a bigger turnout. Once everyone here chimes in on what's good for them, we can pick a good time and place.
#3234
Still trolling
Whatever works best for you guys is fine with me. Danny's right, if we put it out a couple weeks we may get more people. But I am down with a smaller get together for maybe some dinner and a brew or something
#3239
SHIFT_god
Join Date: Oct 2001
Location: Dallas, Tx
Age: 41
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mantis23
embassy suites for a beer or 2, and shoot the shit for a couple of hours?
Other ideas / suggestions? Times / dates?
embassy suites for a beer or 2, and shoot the shit for a couple of hours?
Other ideas / suggestions? Times / dates?