BRAKEMOTIVE Drilled & Slotted Brake Kits - LOWEST PRICES EVER!
03-06-2012, 08:27 PM
#843
I have had the pad/rotor set on for over a week and have been loving every second of it...for the price I'd say why not just run the pads they supply, my
(I had 9K miles on my stock pads/rotors when I changed to this setup and I am happy I made the change, even though my stock stuff was basically new)
03-06-2012, 09:54 PM
#844
Three Wheelin'
my understanding it that you have to run the chamfered powerstop pads with these rotors otherwise it will chatter. I dont know how you would run brembo pads and brembo pads at the same time. unless you mean one set front and one rear or meant the brembo rotors? im confused 
03-07-2012, 04:41 PM
#846
Suzuka Master
Any resolution to the rotors with only one line of cross drilled holes between the slots vs. the 2 lines going on a TL-S or 6 speed TL with Brembos? I just got my rotors today and they only have the 1 line of holes like the rotors for the Auto TLs.
03-07-2012, 06:26 PM
#847
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Brakemotive:
Sir can I get a quote for ET500 pads front and rear for 2005 Acura TL 5AT NON-Brembo's ??? shipped to KS 66062
also include the payment method
Sir can I get a quote for ET500 pads front and rear for 2005 Acura TL 5AT NON-Brembo's ??? shipped to KS 66062
also include the payment method
03-07-2012, 06:52 PM
#848
danny, Sean, of BM says that it's normal and there are 2 different designs. He says that you should call his customer service with the part numbers to confirm they are correct for your application. Personally, I dig the double line look a LOT more.
J.
J.
03-07-2012, 07:39 PM
#849
Suzuka Master
03-08-2012, 09:47 AM
#851
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Anyone got any contact details for Brakemotive ??? needs some ET500's 
The following users liked this post:
swoosh (03-08-2012)
03-08-2012, 10:10 AM
#853
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ hahha thanks Jer....my rears are SHOT !!! damn pins got seized from not driving the car for sooo long....
03-08-2012, 10:33 AM
#855
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ already did....
driver side was SHOT....passenger side had 10-12K worth of life left....swapped outer pads side to side....kinda balance the full thing.....
i dont drive much anyway (until May)....but i feel the pads have done their job wonderfully....rears already have 80K on them, fronts have 40K on them and the rotors have 80K no wear....
i was wanting to go another 20K overall and then switch the full setup, but guess will go another round of pads before rotors....heard great things about the ET500 pads and they are pretty decently priced...I am replacing my Hawk HPS which i feel were 8/10, GREAT GREAT pads....but Inaccurate has me convinced on the ET500's....
driver side was SHOT....passenger side had 10-12K worth of life left....swapped outer pads side to side....kinda balance the full thing.....
i dont drive much anyway (until May)....but i feel the pads have done their job wonderfully....rears already have 80K on them, fronts have 40K on them and the rotors have 80K no wear....
i was wanting to go another 20K overall and then switch the full setup, but guess will go another round of pads before rotors....heard great things about the ET500 pads and they are pretty decently priced...I am replacing my Hawk HPS which i feel were 8/10, GREAT GREAT pads....but Inaccurate has me convinced on the ET500's....
03-08-2012, 10:56 AM
#856
I apologize for any confusion this may have caused. I was able to crack the case of the single drill pattern vs. the dual drill pattern. All that happened was that the new batch of rotors that came in only had a single row of drill holes, which is mainly due to the vane configuration of the rotors we received. The warehouse is out of the rotors with the dual drill pattern. Please note, that the castings are excellent quality and having the single drill pattern will not affect the performance in any way.
All other PM's responded to and sent!
The following users liked this post:
danny25 (03-08-2012)
03-13-2012, 04:34 PM
#865
Great to hear, I have the front and rear drilled and slotted rotors with ceramic pads available for $145.00 shipped. If you are ready to place an order, all I will need is your email address so I can send you a direct checkout link for an online payment.
03-13-2012, 06:17 PM
#866
Chapter Leader (Southeast Region)
Just installed them on my car along with legend 2 piston calipers. they look good and brake good. Thanks Brakemotive!!! Question though for the bed in procedure do you do it once? Also i have a slight clicking noise, does that go awya or is just going to stay there?
03-14-2012, 12:35 PM
#868
Chapter Leader (Southeast Region)
Ok thanks I've quite a few miles on them now an they are good stopping is much better than the oem crap I had. Thanks for fast shipping and a great product. If they don't warp and hold up I got a couple people interested they are just waiting to see how they work out for me. Do you have anything for a 2012 TL? My neighbor just got one and was wondering
03-15-2012, 12:49 PM
#869
Ok thanks I've quite a few miles on them now an they are good stopping is much better than the oem crap I had. Thanks for fast shipping and a great product. If they don't warp and hold up I got a couple people interested they are just waiting to see how they work out for me. Do you have anything for a 2012 TL? My neighbor just got one and was wondering
03-15-2012, 09:38 PM
#873
Im ready to purchase now. Moeblisss12@aol.com
03-16-2012, 09:02 AM
#875
I am sorry to hear about this! It is very, very rare that the rotors would be warped in that small period of time! Please give me a call so I can look into this for you for other possibilities.
@Rockstar143 - As I said above, it is very rare that the rotors would encounter any problems this early! No worries, Brakemotive stands behind their product!
@westhaventl - I just sent you the direct checkout link for the online payment. Let me know if you have any additional quesitons!
@Mondo375 - I have the 08 TL-S 5AT (non Brembo) available for $145.00 shipped. If you are ready to place an order, all I will need is your email address so I can send you a direct checkout link for an online payment!
03-16-2012, 10:14 AM
#878
Sean...I know you stand behind your product...but the REAL question is...do you stand in front of a CAR with your product!!!
Just kidding, man...I'm not much for worry...it leads to early ED. I'm happy with my purchase and am always happy to know I can get back to you with any issues down the line.
Have a great weekend.
J.
Just kidding, man...I'm not much for worry...it leads to early ED. I'm happy with my purchase and am always happy to know I can get back to you with any issues down the line.
Have a great weekend.
J.
03-16-2012, 11:20 AM
#879
Sean...I know you stand behind your product...but the REAL question is...do you stand in front of a CAR with your product!!!
Just kidding, man...I'm not much for worry...it leads to early ED. I'm happy with my purchase and am always happy to know I can get back to you with any issues down the line.
Have a great weekend.
J.
Just kidding, man...I'm not much for worry...it leads to early ED. I'm happy with my purchase and am always happy to know I can get back to you with any issues down the line.
Have a great weekend.
J.
..........You have a great weekend too!
