BRAKEMOTIVE Drilled & Slotted Brake Kits - LOWEST PRICES EVER!
#1001
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
I agree, normally, but notice the thing with USR where I was asked not to share my price, I don't!
Either way...just to chime in, these things still look and act the way they did when installed...namely, still pretty, shiny and awesome!
Either way...just to chime in, these things still look and act the way they did when installed...namely, still pretty, shiny and awesome!
The following users liked this post:
JD TL-S (05-09-2012)
#1003
Heads up to all .... I spoke with Sean @ BrakeMotive yesterday and confirmed this deal is still available ...$145 for front and back drilled and slotted rotors and ceramic pads w/ free shipping .... Never has there been a better deal. Placed my order yesterday. I confirmed with Sean he has ample inventory and is ready to take orders @ 855-556-8103.
Want red calipers but don't want to paint them.
Probably going to do a brake kit at the same time if I can find at a decent price. Suggestions ??? (still can't believe the rotor and brake package price ... Crazy low)
Want red calipers but don't want to paint them.
Probably going to do a brake kit at the same time if I can find at a decent price. Suggestions ??? (still can't believe the rotor and brake package price ... Crazy low)
#1004
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
HOLY SHIT !!!
$145 for a full brake setup !!!![Thud!](https://acurazine.com/forums/images/smilies/thud.gif)
Well Done Jay and Brakemotive for getting us that price !!!
$145 for a full brake setup !!!
![Thud!](https://acurazine.com/forums/images/smilies/thud.gif)
Well Done Jay and Brakemotive for getting us that price !!!
#1005
Heads up to all .... I spoke with Sean @ BrakeMotive yesterday and confirmed this deal is still available ...$145 for front and back drilled and slotted rotors and ceramic pads w/ free shipping .... Never has there been a better deal. Placed my order yesterday. I confirmed with Sean he has ample inventory and is ready to take orders @ 855-556-8103.
Want red calipers but don't want to paint them.
Probably going to do a brake kit at the same time if I can find at a decent price. Suggestions ??? (still can't believe the rotor and brake package price ... Crazy low)
Want red calipers but don't want to paint them.
Probably going to do a brake kit at the same time if I can find at a decent price. Suggestions ??? (still can't believe the rotor and brake package price ... Crazy low)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
The following users liked this post:
ryrykim7902 (04-20-2012)
#1007
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Here is an updated pricing chart:
[b]1999 - 2003 TL & TL Type S/B]
Front Rotors & Z16 Ceramic Pads - $89.99 SHIPPED!*
Rear Rotors & Z16 Ceramic Pads - $105.99 SHIPPED!*
Rotors and Ceramic Pads F&R - $145.00 SHIPPED!*
2004 - 2008 TL
Front Rotors & Z16 Ceramic Pads - $89.99 SHIPPED!*
Rear Rotors & Z16 Ceramic Pads - $105.99 SHIPPED!*
Rotors and Ceramic Pads F&R - $145.00 SHIPPED!*
2007 - 2008 TL-S/6MT
Front Rotors & Ceramic Pads $140.00 Shipped!*
Rear Rotors & Ceramic Pads $105.00 Shipped!*
Front & Rear Rotors & Ceramic Pads $220.00 Shipped!*
2004 - 2008 TSX
Front Rotors & Z16 Ceramic Pads - $89.99 SHIPPED!*
Rear Rotors & Z16 Ceramic Pads - $105.99 SHIPPED!*
Rotors and Ceramic Pads F&R - $145.00 SHIPPED!*
*Shipping is free on all orders in the contiguous 48 states ONLY! Please call for shipping rates to AK, HI, PR
The following users liked this post:
JD TL-S (05-01-2012)
#1008
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
FAWK i paid $500 for my setup....i am hoping these brakes dont stop that well, else i paid put my $$$ down the drain
i hate you BRAKEMOTIVE !!!
![Annoyed](https://acurazine.com/forums/images/smilies/annoyed.gif)
#1015
Racer
iTrader: (1)
Maybe someone in this thread can help a brotha out!? Which way should the slots go? I see both ways in this thread. My driver front rotor that is labeled driver front the screw holes don't match up... but the passenger does. Is there a possibility that they are mis labeled?
Edit: Nevermind. Apparently I've been smoking too much crack rock this pm.
Edit: Nevermind. Apparently I've been smoking too much crack rock this pm.
Last edited by floored4door; 04-25-2012 at 10:14 PM.
#1016
Maybe someone in this thread can help a brotha out!? Which way should the slots go? I see both ways in this thread. My driver front rotor that is labeled driver front the screw holes don't match up... but the passenger does. Is there a possibility that they are mis labeled?
Edit: Nevermind. Apparently I've been smoking too much crack rock this pm.
Edit: Nevermind. Apparently I've been smoking too much crack rock this pm.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
The following users liked this post:
Sick TLS (04-27-2012)
#1019
Racer
After 4 months, I have developed horrible screeching noise while reversing. I did drive in heavy rain last night, though. Did not notice the noise while going forward. I didn't install the brakes myself, but by a local mechanic. Do I get the calipers out and put some anti-squeek get on backing plates?
#1024
**The Catfish**
iTrader: (11)
Ive got to say, Sean is a really stand up guy! He backs his product 110% and has always responded to any questions I have every had via pm faster than I have ever experienced. Free bump for a good guy!
The following users liked this post:
JD TL-S (05-09-2012)
#1029
Instructor
This is just the thread I needed!! I'll be hitting you up Brakemotive..08 TL-S Front & Rear...They look beautiful...now on to find a thread on painting the calipers...hmmm...what color? ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#1032
Hey Sean, order arrived today and everything is great. I just have a few questions. One of my rotors is a bit more bronze in color and slightly rougher to the touch than the other 3, why is this so? Could it be the zinc coating process or the finishing? Also a few vents on the front rotors have some residual metal blocking the vents, is this normal? Otherwise they look great and I can't wait to put them on.
![](https://lh6.googleusercontent.com/-VguILzTWses/T6nM71s98BI/AAAAAAAAAgs/BH70ZfQdf3o/s912/IMAG0045.jpg?gl=US)
#1033
Hey Sean, order arrived today and everything is great. I just have a few questions. One of my rotors is a bit more bronze in color and slightly rougher to the touch than the other 3, why is this so? Could it be the zinc coating process or the finishing? Also a few vents on the front rotors have some residual metal blocking the vents, is this normal? Otherwise they look great and I can't wait to put them on.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#1036
You may have received one of the older rotors on the shelf, which would explain the difference in color. Without seeing the metal that you are talking about, I'm not sure. Can you send me a pic to brakemotiveforums@gmail.com. I would be more than happy to exchange them for you if it is a flaw in the casting. ![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![](https://lh6.googleusercontent.com/-VguILzTWses/T6nM71s98BI/AAAAAAAAAgs/BH70ZfQdf3o/s912/IMAG0045.jpg?gl=US)
Last edited by ChaiLatte; 05-09-2012 at 08:30 PM.
#1037
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Here is an updated pricing chart:
2004 - 2008 TL
Front Rotors & Z16 Ceramic Pads - $89.99 SHIPPED!*
Rear Rotors & Z16 Ceramic Pads - $105.99 SHIPPED!*
Rotors and Ceramic Pads F&R - $145.00 SHIPPED!*
*Shipping is free on all orders in the contiguous 48 states ONLY! Please call for shipping rates to AK, HI, PR
#1039
Vegas Bum
Thanks!
#1040
Odd, I see the pictures on my PC just fine. I took a crack at the residual metal in the vents today. I used a screwdriver to clear out the extra bits. That's taken care of now. The color issue remains and if you still can't see the pic I'll be sure to email you. Can anybody confirm the pic below is visible from their computer?
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)