All Oregon Chat #2 Chat about Rain, Cars, and Rained on Cars!
#2841
Pro
i would of suggested a 1986 ford taurus haha its slow, a heavy brick and if you treat it right it will last... unlike me who was revving the car in nuetral and shifting to drive to burn some rubber instead i burned the tranny haha
but i can say it did take a beating from me for the most part and lasted.. it was my first car what would anyone expect?
but i can say it did take a beating from me for the most part and lasted.. it was my first car what would anyone expect?
His 2004 GP cost me only $5k. Leather interior and decent power, but the size is what I like best. My TL is long, but his GP is longer and a few hundred pounds heavier. It'll keep my boy safe.
#2842
HAHA awesome.. i think my ford cost me 900 bucks.. and i really ran that to the ground i felt sorry for the person that wanted to buy that car after me..
your son is lucky to get a better car then either one of us had when we were younger
your son is lucky to get a better car then either one of us had when we were younger
#2844
^ haha i bet.. when i got my first and second civic thats when the tickets started pouring in.. i still remember my first... 45 in a 25 on the road behind the hillsboro DMV
#2845
I Quit
So I'm converting my garage into an office since I'll be giving up our third bedroom to the new baby. So I need to get rid of some stuff.
KSport coilovers for 1st gen TSX FREE! Rear locks are seized up, if you can think of a way to free them up then you have coilovers that are in great functional condition. THEY'RE FREE TO YOU LOCALS! Crap fix em and sell em I am tired of looking at them!
Just pick them up that's all I ask.
KSport coilovers for 1st gen TSX FREE! Rear locks are seized up, if you can think of a way to free them up then you have coilovers that are in great functional condition. THEY'RE FREE TO YOU LOCALS! Crap fix em and sell em I am tired of looking at them!
Just pick them up that's all I ask.
#2846
I Quit
So it's legit to start a whole thread called the "WTF car of the day" where folks can post pictures of non-member cars to make fun of:
https://acurazine.com/forums/showthr...w#post11875297
But if you point out the same "flaws" of an azine members car who gets a little upset you get banned? Wow.... Are the mods on this site have special needs?
https://acurazine.com/forums/showthr...w#post11875297
But if you point out the same "flaws" of an azine members car who gets a little upset you get banned? Wow.... Are the mods on this site have special needs?
#2847
i think some of the owners have special needs..
Chris i sent you a text on AIM.. ill get your coils see if i can fondle them alittle.. when can i pick them up?
Chris i sent you a text on AIM.. ill get your coils see if i can fondle them alittle.. when can i pick them up?
#2848
iWhine S/C 6MT TL
iTrader: (1)
So it's legit to start a whole thread called the "WTF car of the day" where folks can post pictures of non-member cars to make fun of:
https://acurazine.com/forums/showthr...w#post11875297
But if you point out the same "flaws" of an azine members car who gets a little upset you get banned? Wow.... Are the mods on this site have special needs?
https://acurazine.com/forums/showthr...w#post11875297
But if you point out the same "flaws" of an azine members car who gets a little upset you get banned? Wow.... Are the mods on this site have special needs?
Let it go man, it's not worth the hassle. And regarding that picture it's due to the "My wife and my side chick.. TL" thread. We hit over 10,000 viewers for that thread and approx 13,000 on azine as a whole. The servers couldn't keep up the demand. It's worth the read if you get the chance to read up. It's about 105 pages long now but only worth the read up till page 80. after that it got boring.
Happy modding guys,
#2849
Traded in my
^ Bro, why are you even here giving a shit that he's complaining? Shouldn't you be off, as you said, in your own forum keeping your own bs over there? Keep it outta our thread. kthxbye
#2850
iWhine S/C 6MT TL
iTrader: (1)
If you have an issuse with me, stick it to pm's.
#2852
youre a wanted man chris.. how does it feel to be infamous? BTW no luck on the ksports yet.. only fiddled for a half hour though i will try again this weekend when i have more time but thank you again!!!
#2853
I Quit
^^let me know, I tried everything I could think of but Jay's suggestion of using a vice grip and metal pipe (would have though if I had access to a vice grip)
#2854
ya i tried that and the shock itself came loose.. so now im going to try my pipe wrench.. my worry is when i put it in the vice is i dont want to squish the orange part of the pipe..
i still have a few more ideas
i still have a few more ideas
#2856
thats what i was going to do next only use the pipe wrench on the tubeing cause if i put a bar through the bolt hole for the shock then the shock comes loose
#2860
better then no stereo right? and its the thought that counts =)
#2861
update! shot them with some white lightning and scrubbed with a tooth brush on the threads. with the vise and the pipe wrench i was able to get 3 of the 4 undone.. there is one right now that is alittle more corroded that i will shoot again today and bust out the butane torch..
#2863
chris.. what kind of front camber kit did you use for the acura? i was thinking of making mine atleast a 1 finger gap when i lower it and i dont think my fronts can take much more lowering to keep it in spec.
#2866
yup got them loose they were pretty rusty not sure if it was cause they were put on in the rain or if they got a mud puddle splashed on them alot..
i will have to replace the locking collars for the height adjustment the are pretty bad now.. i took some stuff after taking it apart and clean up the rust then used some anti seize stuff to make sure they dont get corrosion again.
so what youre saying is a 1.9 to 2 inch drop should be ok for alignment? just as long as i match it with the rear on camber?
i will have to replace the locking collars for the height adjustment the are pretty bad now.. i took some stuff after taking it apart and clean up the rust then used some anti seize stuff to make sure they dont get corrosion again.
so what youre saying is a 1.9 to 2 inch drop should be ok for alignment? just as long as i match it with the rear on camber?
#2867
I Quit
Good to hear you got em loose you can get those parts on the ksport site or speed. As long as your toe (I think that's the term) is in spec then your fronts will be fine. A lil negative camber in the front should increase handling anyways. Just get your rears to spec or a bit negative and you shoul be gravy
#2868
got the lock nuts ordered.. anyone know the trick to measuring the height for coilovers? say i want to do a 1.75 drop whats the length i need to measure on the coilovers and where does the measurement start and stop?
#2869
I Quit
Umm guess and check? lol I would imagine just adjust them so they are all even, then install and measure fender to ground and make adjustments as needed. 1.75 isn't low enough either
#2870
Burning Brakes
iTrader: (3)
hey any of you guys know what would cause my steering wheel to pulse/vibrate left and right? Car is smooth, doesnt vibrate but my wheel goes pulses but the car still goes fine. I used to get bad vibrations but changed my axles and that solved it, also raised up my car, 4x4 status but now I have steering wheel shake. Driving me nuts, might just take it in to have it looked at.
#2871
bent wheel? rotors warped? bad axles? wheels out of balance? any of those i think could cause it
#2872
anyone hear about the tsx recall about the power steering?
#2873
Pro
hey any of you guys know what would cause my steering wheel to pulse/vibrate left and right? Car is smooth, doesnt vibrate but my wheel goes pulses but the car still goes fine. I used to get bad vibrations but changed my axles and that solved it, also raised up my car, 4x4 status but now I have steering wheel shake. Driving me nuts, might just take it in to have it looked at.
#2875
Burning Brakes
iTrader: (3)
well the car is smooth on city driving, you cant tell it has any issues until I hit the freeway and around 60mph-70mph it pulses but the car doesnt shake, just the steering wheel. If It was car shake then it could easily be a bunch of things. But my rotors are pretty crappy, it shakes during breaking, but this is while not breaking.
#2876
when was the last time you had the wheels balanced? maybe one of the weights fell off? maybe you have water in the tire ive hear that happen before
#2877
Statement by Acura Regarding TSX Recall
TORRANCE, Calif., April 29, 2010 – Acura today announced a recall of approximately 167,000 Acura TSX vehicles to replace a power steering hose. Affected TSX vehicles are 2004-2008 models sold in the United States with the 2.4L inline 4-cylinder engine. The repair involves installing a new power steering hose, o-ring gasket and fluid— all done at no cost to the vehicle owner.
The recall is being conducted due to the potential for premature deterioration of the exterior surface of the hose as a result of prolonged exposure to high under-hood temperatures. In the event of excessive deterioration, a crack in the hose could develop, which could allow power steering fluid to leak or spray on a hot exhaust component potentially generating smoke or a fire. Acura has only received notice of one incident resulting in a fire.
Owners of affected vehicles will be informed by mail starting at the end of May. In addition, TSX owners can go to http://owners.acura.com/recalls or may call (800) 382-2238 for more information.
TORRANCE, Calif., April 29, 2010 – Acura today announced a recall of approximately 167,000 Acura TSX vehicles to replace a power steering hose. Affected TSX vehicles are 2004-2008 models sold in the United States with the 2.4L inline 4-cylinder engine. The repair involves installing a new power steering hose, o-ring gasket and fluid— all done at no cost to the vehicle owner.
The recall is being conducted due to the potential for premature deterioration of the exterior surface of the hose as a result of prolonged exposure to high under-hood temperatures. In the event of excessive deterioration, a crack in the hose could develop, which could allow power steering fluid to leak or spray on a hot exhaust component potentially generating smoke or a fire. Acura has only received notice of one incident resulting in a fire.
Owners of affected vehicles will be informed by mail starting at the end of May. In addition, TSX owners can go to http://owners.acura.com/recalls or may call (800) 382-2238 for more information.
#2879
I Quit
even when your driving if you have warped rotors it can cause the wheel to shimmy because the pads are always in contact with the rotors.
TSX does it at about 70, has since I bought it.
TSX does it at about 70, has since I bought it.
#2880
Burning Brakes
iTrader: (3)
so going about looking for people's suggestions on rotors on these forums I ran into this
https://acurazine.com/forums/showthr...=757273&page=4
350z rotors w/ RL 4 piston calibers, man. trying to put everything back at stock but damn this is tempting
https://acurazine.com/forums/showthr...=757273&page=4
350z rotors w/ RL 4 piston calibers, man. trying to put everything back at stock but damn this is tempting