Twin Cities Acuras
#4882
Hi all a bit nervous cause you have not heard from me.
I have been a little busy thats why you have not heard from me. Well do not worry its all cool. We can meet at my place . 05 tl Welcome back I do not have a spring compressor but if you get one, and some NONAME "STEAKS" we can get RAZZI to compress them with his teeth. For meat RAZZI will do anything. I do have a new complete A-spec suspension I want to install to
I have been a little busy thats why you have not heard from me. Well do not worry its all cool. We can meet at my place . 05 tl Welcome back I do not have a spring compressor but if you get one, and some NONAME "STEAKS" we can get RAZZI to compress them with his teeth. For meat RAZZI will do anything. I do have a new complete A-spec suspension I want to install to
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#4883
Punctuation Nazi
I vote that a couple of us get there really early and put on my exhaust, and then we can spend the rest of the day putting on Jorge's A-spec suspension and finish it off with his 19s...
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#4887
#4890
T-Swzy
Thread Starter
Join Date: Jun 2007
Location: Saint Paul, MN
Age: 36
Posts: 2,575
Likes: 0
Received 0 Likes
on
0 Posts
jorge is it cool if we start at about 10 in the morning for those that want to show up early to get mods on? we could keep workin on it till later, sun doesnt set till late 7 oclock. and since it IS saturday night, if you guys dont wanna go cruisin we can roll deep into foodsmart and rep the (/-\)
matt, i downloaded the p90x program, i'll burn you a copy and give it to you at the meet
matt, i downloaded the p90x program, i'll burn you a copy and give it to you at the meet
#4891
Not real sure when I'm going to clean it, but at least the parts will be installed
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#4893
We'll just make you park on the other side of the street! But that's where I'll be unless I get to cleaning off the winter grim that's built up on my car.....
#4894
I'm back
jorge is it cool if we start at about 10 in the morning for those that want to show up early to get mods on? we could keep workin on it till later, sun doesnt set till late 7 oclock. and since it IS saturday night, if you guys dont wanna go cruisin we can roll deep into foodsmart and rep the (/-\)
matt, i downloaded the p90x program, i'll burn you a copy and give it to you at the meet
matt, i downloaded the p90x program, i'll burn you a copy and give it to you at the meet
#4896
Instructor
Hah, nice job MyPearl02 for taking my #15 position :angryfire I guess I'll be #16 now. My friend, Louis, might attend with me with his '04 Yamaha R1. He's got some pretty sick mods done to it so far...
1. Slepybear- Matt
2. Smokincivic
3. Glowrdr - Brian
4. Razzi - Ken
5. BlackuraTL - Kyle
6. Chokin - Kin (wishing for a cruise)
7. 05TLRIDER - Kevin
8. AsuJosh - Josh
9. phitech - sumo, david
10. Spiritman
11. WannabeG
12. Phantom_of_the_Acura - Max
13. VTEChump,
14. formula1
15. MyPearl02 ~ Tyler
16. Carmodifier - Travis, Louis
MIAs
1. TheWeez,
2. TL-ed,
3. gunner252,
5. bgsm1th,
6. HPP,
8. Gambits06TL,
9. SixSpeedLuxury,
10. TrojanKing,
11. stealthgator,
12. madpoz,
13. RTLNOOBIE,
14. gen2_TLS,
15. Cuteguy1414,
16. ts_vaj,
17. ZEUS'O3TL,
18. lusid,
19. Stan0050,
20. ABCTypeS
21. definitive
1. Slepybear- Matt
2. Smokincivic
3. Glowrdr - Brian
4. Razzi - Ken
5. BlackuraTL - Kyle
6. Chokin - Kin (wishing for a cruise)
7. 05TLRIDER - Kevin
8. AsuJosh - Josh
9. phitech - sumo, david
10. Spiritman
11. WannabeG
12. Phantom_of_the_Acura - Max
13. VTEChump,
14. formula1
15. MyPearl02 ~ Tyler
16. Carmodifier - Travis, Louis
MIAs
1. TheWeez,
2. TL-ed,
3. gunner252,
5. bgsm1th,
6. HPP,
8. Gambits06TL,
9. SixSpeedLuxury,
10. TrojanKing,
11. stealthgator,
12. madpoz,
13. RTLNOOBIE,
14. gen2_TLS,
15. Cuteguy1414,
16. ts_vaj,
17. ZEUS'O3TL,
18. lusid,
19. Stan0050,
20. ABCTypeS
21. definitive
#4897
Instructor
Join Date: Sep 2007
Location: Minnesota
Age: 38
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
hahahaha oopse my bad. well fourmula1 and i spent about 5 hrs on my paint and it look like after all im not gonna have to send it to the body shop it turned out great. im gonna need an address so formula and i can drive out there.
#4898
8th Gear
I guess im planning on the meet for the 11th. I'll get my 19s on this week and come on over.
Josh, i'll be at the FNF showing tonight. Wont have my car tohugh. With my newly aquired stereo equipment, i worry about it sitting in a lot in plymouth at 12pm at night...
So i'll either have the 08 G or my moms truck. Also bringing my 2 friends.
Josh, i'll be at the FNF showing tonight. Wont have my car tohugh. With my newly aquired stereo equipment, i worry about it sitting in a lot in plymouth at 12pm at night...
So i'll either have the 08 G or my moms truck. Also bringing my 2 friends.
#4899
8th Gear
Fun meetin you guys tonight! Josh, and Takata (sick car BTW) and 05tlrider. Of course slepy LOL the movie was OK i guess, best part was meeting ya'll.
I had an awesome ride back on 494 too. No cars, no cops. Damn pickup wouldnt go over 98 though haha i love 2am driving.
I had an awesome ride back on 494 too. No cars, no cops. Damn pickup wouldnt go over 98 though haha i love 2am driving.
#4901
New Member
Join Date: Apr 2008
Location: Brooklyn park, mn
Age: 37
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
question for you all even though the meet on the 11th, i was looking at the forecast and it is suppose to rain. Are we still down for it rain or shine?
#4902
Honda Noob
#4903
Honda Noob
It's fall here and it still feels like a twin cities summer.
Originally Posted by Josh
Hey Nitro, would it be wrong of me to invite myself down for the MotoGP race at Philip Island?
#4904
jorge is it cool if we start at about 10 in the morning for those that want to show up early to get mods on? we could keep workin on it till later, sun doesnt set till late 7 oclock. and since it IS saturday night, if you guys dont wanna go cruisin we can roll deep into foodsmart and rep the (/-\)
matt, i downloaded the p90x program, i'll burn you a copy and give it to you at the meet
matt, i downloaded the p90x program, i'll burn you a copy and give it to you at the meet
#4905
I guess im planning on the meet for the 11th. I'll get my 19s on this week and come on over.
Josh, i'll be at the FNF showing tonight. Wont have my car tohugh. With my newly aquired stereo equipment, i worry about it sitting in a lot in plymouth at 12pm at night...
So i'll either have the 08 G or my moms truck. Also bringing my 2 friends.
Josh, i'll be at the FNF showing tonight. Wont have my car tohugh. With my newly aquired stereo equipment, i worry about it sitting in a lot in plymouth at 12pm at night...
So i'll either have the 08 G or my moms truck. Also bringing my 2 friends.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#4906
Punctuation Nazi
#4913
T-Swzy
Thread Starter
Join Date: Jun 2007
Location: Saint Paul, MN
Age: 36
Posts: 2,575
Likes: 0
Received 0 Likes
on
0 Posts
jorge could you PM me your address. i have a couple of guys on here who aren't checkin the forums but are local.
anyone else, if you still dont have the address, give takata 18 a message. or send me an email at razzikh@gmail.com so i can throw you on a mailing list
anyone else, if you still dont have the address, give takata 18 a message. or send me an email at razzikh@gmail.com so i can throw you on a mailing list
#4914
fu
Join Date: May 2008
Location: Woodbury, MN
Age: 32
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
alright..
we started at about 11, me and my moms boyfriend... the bolts were to rusted, and so after a little bit, we tried a lube wasnt working.. I just called my friend who does my painting on stuff, he has a shop..
we talked, and agreed on 6 to let me in and start. SO it was 8 when he got there, and we started at around 9.. we both were a little late, me and my 2 friends chilled in the shop. He had an air compressor=makes every bolt wayyyy easier. so we did the rear suspension, me and my friend who didn't know what to do or how to do it really.. his dad, who owns the shop, would help us from time to time, and after about an hour, we had the first spring off and replaced and back on. we ran into problems a couple times with dropping bolts etc and some bolts being difficult, or trouble lining up.. but we got faster on each one, and by the last one, we had it down, i took us less than 20 mins from the first bolt being taken off to the wheel being back on.. we had a fourthmeal stop around 2, and that took some time, but all in all we finished at 3:30 with cleaning and everything. but the install was very fun, and i had a good time learning how to do it
we started at about 11, me and my moms boyfriend... the bolts were to rusted, and so after a little bit, we tried a lube wasnt working.. I just called my friend who does my painting on stuff, he has a shop..
we talked, and agreed on 6 to let me in and start. SO it was 8 when he got there, and we started at around 9.. we both were a little late, me and my 2 friends chilled in the shop. He had an air compressor=makes every bolt wayyyy easier. so we did the rear suspension, me and my friend who didn't know what to do or how to do it really.. his dad, who owns the shop, would help us from time to time, and after about an hour, we had the first spring off and replaced and back on. we ran into problems a couple times with dropping bolts etc and some bolts being difficult, or trouble lining up.. but we got faster on each one, and by the last one, we had it down, i took us less than 20 mins from the first bolt being taken off to the wheel being back on.. we had a fourthmeal stop around 2, and that took some time, but all in all we finished at 3:30 with cleaning and everything. but the install was very fun, and i had a good time learning how to do it
#4916
fu
Join Date: May 2008
Location: Woodbury, MN
Age: 32
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
we started at 11, went to go get some tools once we got the wheels off, and then got lunch, got back, went til maybe 1, and put the wheels on and quit for then.. then at 3 i went to my friends house, and we chilled til like 530, then we went out to eat, got back at 630, and went up to the shop, but rick didn't get there til 8, 830.. then we got the car in and started at 9, with about an hour of breaks in the process, so like 9 til 330, one hour of not doing anything
#4917
Luke has been working and buying car parts. I parted out my 87 TA. I kept the motor and t56. I am currently building a 71 TA clone from a very solid 78 TA. I'll be on the road this year in flat black.
#4920
fu
Join Date: May 2008
Location: Woodbury, MN
Age: 32
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
ride is great, it feels a lot better than the old springs, on those i'd be going off my dirveway and i'd feel like it was still shaking half a mile later.. these are better by a long shot.
and i do have pics, before and after, but they are on my phone.. and i don't know how to get them onto my comp. for free.. so either photoshoot this friday janick, or everyone will have to wait til the meet this saturday. haha, i'll probably end up taking pics on my moms camera soon though
and i do have pics, before and after, but they are on my phone.. and i don't know how to get them onto my comp. for free.. so either photoshoot this friday janick, or everyone will have to wait til the meet this saturday. haha, i'll probably end up taking pics on my moms camera soon though