Group Buy for JnR ECU - Dyno's/Gains (12/23); Prices Posted (1/7)
#481
BANNED
iTrader: (33)
can those settings be tweaked BEFORE sending out the ECU? or is it something i'd have to go to a shop for after i install it?
#483
BANNED
iTrader: (33)
so that's something they can adjust at a tune shop?
i won't have to buy anything else but the ECU still, right? sensor/bung, guages, knock monitor, etc?
#485
Safety Car
If this (AFR too lean at startup) was indeed the problem, then it could be fixed by tweaking the settings. With nothing extra for you to buy or add. The tweak can be done by trail-and-error by slowly making the AFR more rich (in that area of the map) until the car had a proper startup. It would take repeated visits to the tuner perhaps as the ideal setting was being approached. I say this because the tuner can not sit there and get it correct in one visit most likely. The engine needs to be stone cold. So, the tuner tweaks it and then you tell him how the car reacted when you started it in the mornings.
DISCLAIMER - I have not been there and done that. I base all of the above on my expectation of how the events would unfold.
Last edited by Inaccurate; 01-06-2012 at 11:02 AM.
#486
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ this
i exactly plan on doing this....trial and error....since the MS3 has increaments of .1, i wouldnt try to mess more than that at a time....
dont just put the AFR as 2 and say "that would do it"....switch it from 13.4 to 13.2 and see how it reacts
i exactly plan on doing this....trial and error....since the MS3 has increaments of .1, i wouldnt try to mess more than that at a time....
dont just put the AFR as 2 and say "that would do it"....switch it from 13.4 to 13.2 and see how it reacts
#487
Safety Car
iTrader: (3)
If you look here, it explains how the startup is handled.
http://www.msextra.com/doc/ms2extra/...htm#start_idle
As Inacc points out, all of these settings are based on the current coolant temperature so it could be a long process.
It would also be difficult for Rodney to setup a cold crank at my possible coldest day of -30F when he doesn't see anything close to that.
http://www.msextra.com/doc/ms2extra/...htm#start_idle
As Inacc points out, all of these settings are based on the current coolant temperature so it could be a long process.
It would also be difficult for Rodney to setup a cold crank at my possible coldest day of -30F when he doesn't see anything close to that.
#488
All motor
Just move bro.
#489
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Good news
TONIGHT Rodney will become a Vendor
So get ready to order....I will post up the price breakdown and will explain how to order
People who are getting the ECU, it will be simple for you fellas....Others will have to explain what you are paying for as am trying to make it a one stop shop for all of ya....
Injectors/Pigtails/Knock Monitor/AFR stuff/Fuel pump....everything can be got here....so you wont have to go anywhere else
So get ready to order....I will post up the price breakdown and will explain how to order
People who are getting the ECU, it will be simple for you fellas....Others will have to explain what you are paying for as am trying to make it a one stop shop for all of ya....
Injectors/Pigtails/Knock Monitor/AFR stuff/Fuel pump....everything can be got here....so you wont have to go anywhere else
The following users liked this post:
SharksBreath (01-06-2012)
The following users liked this post:
ggesq (01-07-2012)
#491
AZ Community Team
Join Date: May 2007
Location: N35°03'16.75", W 080°51'0.9"
Posts: 32,488
Received 7,771 Likes
on
4,342 Posts
'bout time.
:wink:
:wink:
#492
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
buahahahaha NICENESSSSS
Rodney imma post the breakdown....pickup your phone LOL...
Rodney imma post the breakdown....pickup your phone LOL...
#497
Turd Polisher
iTrader: (1)
Woo J&R!
#498
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Custom maps for complete RV6 exhaust in 2 variants (PCDs and HFC's)
damn
#499
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
MODS:
Quick question....can Rodney post the prices here and you guys will be nice enough to update the 1st post ? or will be more of a creating a new thread ?
Quick question....can Rodney post the prices here and you guys will be nice enough to update the 1st post ? or will be more of a creating a new thread ?
The following users liked this post:
InFaMouSLink (01-07-2012)
#500
Senior Moderator
iTrader: (1)
We will do whatever Rodney wants. If Rodney wants it posted to the first post we will. If Rodney wants to start a brand new updated clean thread that is all good too. As stated in the PM to you by Bearcat, let Rodney state here in this thread clearly what HE wants. Thanks.
#504
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
:gheyhug:
lol i saw that and i was like i dont mind Rodney being a mod + Vendor
#506
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
he should be posting it right now....just got off the phone with him....i do see him active
#507
Got a pricing for you guys.
NOTE: The prices will include Shipping and Handling as well as Paypal fees.
The ECU price includes:
Jandr plug and play ECU
ECU harness prewired onto jumper harness
Base map preloaded into ECU
When ordering please include,
Year of Car ?
Auto or Manual ?
Base or TypeS ?
Upgades done to the car please include all mods this will help get the most accurate BASE MAP
PAYPAL ID: jandrnextlevel@yahoo.com
PRICES BEFORE JAN 31st
ECU: 1225
Knock Monitor: 100
AEM 30-4100 AEM Wideband UEGO Gauge Controller: 180
12" Harness: 60
Injectors: 265
Pigtails: Am still working on a good price for those. Dont send in payment for those. If you need them, let me know and will PM you the price.
After Jan 31st prices
ECU: 1395
Knock Monitor: 125
AEM Wideband: 190
12" Harness: 75
Injectors: 280
So in the GB you will be saving a total of $240
EDIT: Mods can you please reflect the changes to 1st post ? Thank you.
NOTE: The prices will include Shipping and Handling as well as Paypal fees.
The ECU price includes:
Jandr plug and play ECU
ECU harness prewired onto jumper harness
Base map preloaded into ECU
When ordering please include,
Year of Car ?
Auto or Manual ?
Base or TypeS ?
Upgades done to the car please include all mods this will help get the most accurate BASE MAP
PAYPAL ID: jandrnextlevel@yahoo.com
PRICES BEFORE JAN 31st
ECU: 1225
Knock Monitor: 100
AEM 30-4100 AEM Wideband UEGO Gauge Controller: 180
12" Harness: 60
Injectors: 265
Pigtails: Am still working on a good price for those. Dont send in payment for those. If you need them, let me know and will PM you the price.
After Jan 31st prices
ECU: 1395
Knock Monitor: 125
AEM Wideband: 190
12" Harness: 75
Injectors: 280
So in the GB you will be saving a total of $240
EDIT: Mods can you please reflect the changes to 1st post ? Thank you.
Last edited by jandrnextlevelperformance; 01-07-2012 at 01:31 PM.
#508
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
ORDERED
1. swoosh - 05 5AT - Payment sent - fully bolted on exhaust/intake/pnp mani/runners/bored TB GOT: ECU+longer harness + injectors + knock monitor + Wideband AEM
2. Justin Myers - '06 6MT - justnspace - Credit card ready
3. Justin Rogers- '04 AT - j-rogsuperstar
4. Champ - 06 AT - TheChamp531 - ready
5. phatrick34 - 06 base MT - phatrick
6. Jack213 - 05 AT supercharge
7. fenda rolla - 07 base AT - SURE AS HEAVEN, bitches...
8. InFaMouS LinK - 06 6speed- ECU,Injectors, Fuel Assembly
9. Bouncer07- 05 TL 6spd
10. r3devi7 - '04 AT - Debit card ready....BALLIN' !!!
11. Joey tl - 04 TL
12. Dstah - 07 tl-s 6speed
13. Sharksbreath - 07 TL-S AT 100% GOOD TO GO
14. Anon Person- Wanted to keep the mods under the wraps so PM-ed me to add his name on the list. SURE AS HELL via PM
15. Joe Manteiga 06 AT - sloppyjoe92
16. t0talacuratl - 04 TL 6spd - ready for sure
17. Noober - 07 TL-S 5AT - Ready Pending Price
18. Feji - FCVADI - 04 6MT
19. Black07tls - 5AT (pcds, rv6 v3 jpipe, aem v2)- Cash in Hand
20.
1. swoosh - 05 5AT - Payment sent - fully bolted on exhaust/intake/pnp mani/runners/bored TB GOT: ECU+longer harness + injectors + knock monitor + Wideband AEM
2. Justin Myers - '06 6MT - justnspace - Credit card ready
3. Justin Rogers- '04 AT - j-rogsuperstar
4. Champ - 06 AT - TheChamp531 - ready
5. phatrick34 - 06 base MT - phatrick
6. Jack213 - 05 AT supercharge
7. fenda rolla - 07 base AT - SURE AS HEAVEN, bitches...
8. InFaMouS LinK - 06 6speed- ECU,Injectors, Fuel Assembly
9. Bouncer07- 05 TL 6spd
10. r3devi7 - '04 AT - Debit card ready....BALLIN' !!!
11. Joey tl - 04 TL
12. Dstah - 07 tl-s 6speed
13. Sharksbreath - 07 TL-S AT 100% GOOD TO GO
14. Anon Person- Wanted to keep the mods under the wraps so PM-ed me to add his name on the list. SURE AS HELL via PM
15. Joe Manteiga 06 AT - sloppyjoe92
16. t0talacuratl - 04 TL 6spd - ready for sure
17. Noober - 07 TL-S 5AT - Ready Pending Price
18. Feji - FCVADI - 04 6MT
19. Black07tls - 5AT (pcds, rv6 v3 jpipe, aem v2)- Cash in Hand
20.
Last edited by swoosh; 01-07-2012 at 01:28 PM.
#509
Green Machine
iTrader: (3)
Got a pricing for you guys.
NOTE: The prices will include Shipping and Handling as well as Paypal fees.
The ECU price includes:
Jandr plug and play ECU
ECU harness prewired onto jumper harness
Base map preloaded into ECU
When ordering please include,
Year of Car ?
Auto or Manual ?
Base or TypeS ?
Upgades done to the car please include all mods this will help get the most accurate BASE MAP
PAYPAL ID: jandrnextlevel@yahoo.com
PRICES BEFORE JAN 31st
ECU: 1225
Knock Monitor: 100
AEM 30-4100 AEM Wideband UEGO Gauge Controller: 180
12" Harness: 60
Injectors: 265
Pigtails: Am still working on a good price for those. Dont send in payment for those. If you need them, let me know and will PM you the price.
After Jan 31st prices
ECU: 1395
Knock Monitor: 125
AEM Wideband: 190
12" Harness: 75
Injectors: 280
So in the GB you will be saving a total of $240
EDIT: Mods can you please reflect the changes to 1st post ? Thank you.
NOTE: The prices will include Shipping and Handling as well as Paypal fees.
The ECU price includes:
Jandr plug and play ECU
ECU harness prewired onto jumper harness
Base map preloaded into ECU
When ordering please include,
Year of Car ?
Auto or Manual ?
Base or TypeS ?
Upgades done to the car please include all mods this will help get the most accurate BASE MAP
PAYPAL ID: jandrnextlevel@yahoo.com
PRICES BEFORE JAN 31st
ECU: 1225
Knock Monitor: 100
AEM 30-4100 AEM Wideband UEGO Gauge Controller: 180
12" Harness: 60
Injectors: 265
Pigtails: Am still working on a good price for those. Dont send in payment for those. If you need them, let me know and will PM you the price.
After Jan 31st prices
ECU: 1395
Knock Monitor: 125
AEM Wideband: 190
12" Harness: 75
Injectors: 280
So in the GB you will be saving a total of $240
EDIT: Mods can you please reflect the changes to 1st post ? Thank you.
#510
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ if you wanna install under the drivers seat you will need it....
if you wanna install in the passenger footwell you wont be needing it. PS: it will be sticking out in the passenger footwell....
you can get creative and install in the glove box, but again its your call....
personally i would get the longer harness and tuck the wire in....leave room for future improvements....
if you wanna install in the passenger footwell you wont be needing it. PS: it will be sticking out in the passenger footwell....
you can get creative and install in the glove box, but again its your call....
personally i would get the longer harness and tuck the wire in....leave room for future improvements....
#511
04' tl 6 spd
thanks for becoming a vendor and working hard on this ECU, also thanks Swoosh for all his HELP.
I live in Canada, need a paypal invoice price (jdb_79@hotmail.com) for shipping to
L6A-0N1, with the ECU,AEM widebands A/F and knock monitor.
I have a 2004 Acura TL 6 speed base(form Canada if it makes a difference): mods are rv6 HFC,rv6 v-3 j-pipe,ATLP catback exhaust,AEM cold air intake and p2r Throttle spacer.
thanks
I live in Canada, need a paypal invoice price (jdb_79@hotmail.com) for shipping to
L6A-0N1, with the ECU,AEM widebands A/F and knock monitor.
I have a 2004 Acura TL 6 speed base(form Canada if it makes a difference): mods are rv6 HFC,rv6 v-3 j-pipe,ATLP catback exhaust,AEM cold air intake and p2r Throttle spacer.
thanks
#513
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
thanks for becoming a vendor and working hard on this ECU, also thanks Swoosh for all his HELP.
I live in Canada, need a paypal invoice price (jdb_79@hotmail.com) for shipping to
L6A-0N1, with the ECU,AEM widebands A/F and knock monitor.
I have a 2004 Acura TL 6 speed base(form Canada if it makes a difference): mods are rv6 HFC,rv6 v-3 j-pipe,ATLP catback exhaust,AEM cold air intake and p2r Throttle spacer.
thanks
I live in Canada, need a paypal invoice price (jdb_79@hotmail.com) for shipping to
L6A-0N1, with the ECU,AEM widebands A/F and knock monitor.
I have a 2004 Acura TL 6 speed base(form Canada if it makes a difference): mods are rv6 HFC,rv6 v-3 j-pipe,ATLP catback exhaust,AEM cold air intake and p2r Throttle spacer.
thanks
No it will not make a difference....There might be a little added shipping but I will let Rodney figure that out and send you an invoice.....
As I mentioned, its better to have couple extra inches than saying "why GOD why"
but yeah not required if you mounting in the passenger footwell.....required if your mounting under the seat....i got it for just in case....if i dont need it, will sell it on BM
Last edited by swoosh; 01-07-2012 at 02:05 PM.
#514
Chapter Leader (NY/NJ)
iTrader: (10)
forgot the price of the custom Fuel Pump...
Also, if buying Injectors, We will still need the Scion TC clips unless you get the pigtails from Rodney after he works out his pricing.
Also, if buying Injectors, We will still need the Scion TC clips unless you get the pigtails from Rodney after he works out his pricing.
Last edited by InFaMouSLink; 01-07-2012 at 02:13 PM.
#515
Green Machine
iTrader: (3)
^^^ if you wanna install under the drivers seat you will need it....
if you wanna install in the passenger footwell you wont be needing it. PS: it will be sticking out in the passenger footwell....
you can get creative and install in the glove box, but again its your call....
personally i would get the longer harness and tuck the wire in....leave room for future improvements....
if you wanna install in the passenger footwell you wont be needing it. PS: it will be sticking out in the passenger footwell....
you can get creative and install in the glove box, but again its your call....
personally i would get the longer harness and tuck the wire in....leave room for future improvements....
Rodney, I'm ordering the ECU and 12" Harness. I have a 2004 Acura TL 6MT with 156,000 miles. My mod list as follows: AEM CAI V2, Port and Polish Intake Manifold, RV6 Precat Deletes V3, XLR8 J-pipe, 3rd Procat (High Flow Cat), Custom Catback (Greddy piping, Magnaflow/Vibrant resonators, and Borla mufflers), Outlaw Intake Manifold Spacer, P2R Throttle Body Spacer, Clutch Masters Stage 3 w/Lightweight Flywheel, Check Valve Delete, Innovative Motor Mounts.
#517
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
#520
Safety Car
iTrader: (3)
^^^ if you wanna install under the drivers seat you will need it....
if you wanna install in the passenger footwell you wont be needing it. PS: it will be sticking out in the passenger footwell....
you can get creative and install in the glove box, but again its your call....
personally i would get the longer harness and tuck the wire in....leave room for future improvements....
if you wanna install in the passenger footwell you wont be needing it. PS: it will be sticking out in the passenger footwell....
you can get creative and install in the glove box, but again its your call....
personally i would get the longer harness and tuck the wire in....leave room for future improvements....