**Official GReddy EvoII Group Buy Thread** ends 8/31/2007
#761
I just installed mine, it sounds great, has a lot more balls than my greddy evo on the rsx-s that I used to have. Mine was scratched pretty bad too but you cant see it whan its installed so its no big deal. My passenger side tip sticks out a little more than the drivers side. Does anyone know what I did wrong with the install. I had my wife align it while I tightend everything but we could not get it pushed in any. Besides that (which I am sure is installation error) I am very happy with mine
#763
Originally Posted by rex1
I had my wife align it while I tightend everything but we could not get it pushed in any. Besides that (which I am sure is installation error) I am very happy with mine
#765
just installed mine! awesome sound..and the drone everyone complains about is very controllable! if you not gassing it you dont really hear to much drone...only complaint so far is the clearance under the exhaust..my car is slammed pretty good so pulling out over a drainage between streets earlier i scraped my new exhaust ..but thats part of having a lowered car...ill learn to drive around it..i should have some good video tonight since no one else can seem to do so..thanks greddy!
#767
No damage to outside of box...just inner box damage from parts tumbling around I guess. Please advise. I need a replacement side or exchange system ASAP if possible. Can they just pick one up and take the other away or would you just be sending the one side only. I believe this one is a passenger side can that damaged. The other one looks ok so far....although I havent removed the wrapper totally...from what I can see...only one of em damaged.
#772
Originally Posted by rex1
I just installed mine, it sounds great, has a lot more balls than my greddy evo on the rsx-s that I used to have. Mine was scratched pretty bad too but you cant see it whan its installed so its no big deal. My passenger side tip sticks out a little more than the drivers side. Does anyone know what I did wrong with the install. I had my wife align it while I tightend everything but we could not get it pushed in any. Besides that (which I am sure is installation error) I am very happy with mine
#773
Originally Posted by lights
damn I so envy you after I read this....you and your wife installed the exhausts together??? man....nice!!
Anyways, UPS FTL - guy was an idiot. Came home and the box was sitting right there!
I've at least delayed the inevitable until I have them installed!
#774
Damn - just as I suspected, got mine today, checked the box and 1 canister is scratched like hell. I'm not sure what I'm gonna do, because, truth be told, inside of a week, the whole exhaust is gonna get battered anyway - do I really care about the scratch? It looks like it's on the top of the cannister anyway that won't get seen. I wasn't planning to install it until Sat anyway....I'll see.
#777
I will need to take mine off and take the pics.. The scratches were pretty bad.. I did not carefully check the piping but will soon. maybe tomorrow when it gets sunnier around the bay area..
#778
Originally Posted by jetblakTL
Damn - just as I suspected, got mine today, .
#780
94 DC4 RS LSV/Turbo
iTrader: (1)
Joined: Jul 2007
Posts: 11,734
Likes: 11
From: New York City | Stuck in Traffic
UPS is pretty good with paying for damage goods which is why alot of companies love shipping with them, they just credit your ups account which is awesome lol...
as for buying a damaged one? I pm'd greddy already (evil grin)
as for buying a damaged one? I pm'd greddy already (evil grin)
#782
Originally Posted by aznbenz07
Now I'm confused cause my delivery date at ups's website says the 24th but if you got your's already then I'd assume I'd get mine tomorrow or Thursday. As for the scratch fiasco, it seems more to me about the principle of waiting and waiting only to receive damaged goods. That sucks man, sorry to hear about the damages guys, I'll probably be in the same boat but as long as none of the scratches on mine are deep enough to seemingly become a hole in the next few years I'm bolting those suckers right on!
#783
As for the scratch - it's carved pretty good, but it's nowhere near the pictures I've seen in previous posts and the scratch is not that long - it looks like the hanger from the other cannister came in contact with it. I have to take another better look at it today but I don't think it's deep enough to be a rust problem - I might just say to hell with it since it's on the top of the cannister, drop some high-heat rustoleum on it, and call it a day - I'm not gonna let it stress me too much........
#785
Originally Posted by stillhere153
UPS is pretty good with paying for damage goods which is why alot of companies love shipping with them, they just credit your ups account which is awesome lol...
as for buying a damaged one? I pm'd greddy already (evil grin)
as for buying a damaged one? I pm'd greddy already (evil grin)
Always a bargain hunter.
#786
I had no damage/scratches on mine. Chris has already said he'll take care you and what to do...it's all good.
UPS delivered it the day they said they would. Maybe they're slowing down due to Christmas volume.
And so far, everyone who's heard it has liked it, even my boss, who turned 50 last week.
UPS delivered it the day they said they would. Maybe they're slowing down due to Christmas volume.
And so far, everyone who's heard it has liked it, even my boss, who turned 50 last week.
#788
Originally Posted by type-s09
stainless will rust eventually man..its still metal...
Aren't you the guy afraid to use polish on the tips? How do you think that stainless steel got shiny? Polishing rouge, a buffing wheel, and polish...
#789
Payment sent
Hey Greddy -
I just sent in the remainder of my payment ($411.50). Looks like I'm the last one, I apologize for the delay - have not checked Azine in a while. Look forward to getting a tracking number from you. Thanks.
-NRaza
I just sent in the remainder of my payment ($411.50). Looks like I'm the last one, I apologize for the delay - have not checked Azine in a while. Look forward to getting a tracking number from you. Thanks.
-NRaza
#790
Originally Posted by Kennedy
Actually, no it won't. It will corrode lightly over a long time, depending on the harshness of the environment and chemicals it's exposed to. A light scratch will not cause any "worse" or accelerated corrosion either. The stainless steel is polished NOT treated, the scratch is not exposing an "untreated surface".
Aren't you the guy afraid to use polish on the tips? How do you think that stainless steel got shiny? Polishing rouge, a buffing wheel, and polish...
Aren't you the guy afraid to use polish on the tips? How do you think that stainless steel got shiny? Polishing rouge, a buffing wheel, and polish...
I will be contacting the customers w/ damage complaints today. I will be out of town from the 20th to the 25th, but i will have someone else take care of you guys while i'm gone. This means i won't be able to tend to this thread, but i'll be back online on the 26th.
#793
Originally Posted by Kennedy
Actually, no it won't. It will corrode lightly over a long time, depending on the harshness of the environment and chemicals it's exposed to. A light scratch will not cause any "worse" or accelerated corrosion either. The stainless steel is polished NOT treated, the scratch is not exposing an "untreated surface".
Aren't you the guy afraid to use polish on the tips? How do you think that stainless steel got shiny? Polishing rouge, a buffing wheel, and polish...
Aren't you the guy afraid to use polish on the tips? How do you think that stainless steel got shiny? Polishing rouge, a buffing wheel, and polish...
my pocket knife is D2 Stainless steel, which is one of the hardest stainless made..if some kind of sodium(sweat, blood) is left on there it rusts bad enough to pit it...the weaker the stainless the less chance it has of rusting..the harder the larger chance it has..
With this exhaust there are no worries because it isnt a very hard stainless...
#794
Wierd. I own 7 stainless HK pistols. I know a little about "smithing" too. I don't know it all, but I know a bit. Weapon strength stainless and exhasut system (probably 316 grade stainless) are totally different in characteristics. Some grades, specifically weapons grade, are NOT very corrosion resisant, and thus don't hold well to the elements.
My 7 year old Stainless Borla on my Xterra hasn't rusted yet, but it showing some pitting from years in the salt belt and offroad abuse...
My fully polished GHL on my VW lasted 3 winters with not a sign of tarnish.
When will your exhaust be sealed in a container with wet salty rags for a month?
Nothing lasts forever, the point was that your TL will be falling apart before stainless corrosion of your Greddy will be an issue. A little scratch on the top the can will not be affected any differently that the rest of the system.
The corrosion will occur at the weld points first, as the weld stick is an alloy that's not as weather resistant as the rolled polished stainless used int he muffler and tubing... and that's about 10 years away from being an issue.
My 7 year old Stainless Borla on my Xterra hasn't rusted yet, but it showing some pitting from years in the salt belt and offroad abuse...
My fully polished GHL on my VW lasted 3 winters with not a sign of tarnish.
When will your exhaust be sealed in a container with wet salty rags for a month?
Nothing lasts forever, the point was that your TL will be falling apart before stainless corrosion of your Greddy will be an issue. A little scratch on the top the can will not be affected any differently that the rest of the system.
The corrosion will occur at the weld points first, as the weld stick is an alloy that's not as weather resistant as the rolled polished stainless used int he muffler and tubing... and that's about 10 years away from being an issue.
#795
Damaged Exhaust
[IMG]DSCN0464[/IMG] I see numerous people have reported damages to exhaust. My complaint should fall right in line. Left exhaust canister scratches located top and side of canister.
I have not mounted exhaust YET.
Box also damaged; found Box incorrectly leaning tall end up even after its illustrated which way is UP.
Packaging is very poor; exhaust pipe was sticking out of the corner of the box!!
I will load pics once I figure out how to
I have not mounted exhaust YET.
Box also damaged; found Box incorrectly leaning tall end up even after its illustrated which way is UP.
Packaging is very poor; exhaust pipe was sticking out of the corner of the box!!
I will load pics once I figure out how to
#796
i'm very surprised how many people's exhaust is damaged. sounds like the bottom line is just poor packaging. hopefully greddy will accomodate for all the damages. nonetheless, i still love my evo2.
#798
Originally Posted by Polixtroy1002
Talked to Chris about my damage, he has already shiped the replacement part AND sent it over night!!!