What did you do to your CL today?
#682
I have been away for awhile but I ordered my stock spoiler brand new off of eBay for 79.99 with free shipping. The only thing is my car is white and the spoiler was red, the white ones were higher. I just wet sanded the spoiler and shot it with matching color paint and wet sanded it again and shot it with clear and it looks fine. it comes with all the hardware you need including over load springs. I just looked and he doesn't have any listed like mine but here is a link http://motors.shop.ebay.com/magautop...911.m270.l1313 If you keep looking you will see him post a red one for 97-99 Acura Cl's and it will be 79.99 with free shipping. That is if you don't mind the painting process. If you do, then I would get one that matches your car
Gonna' debadge it shortly..D2's and 18" XXR 962's will be ordered once my tax return arrives
#683
Stay Low Pro Kinfolk
#684
Seeing the 962's on your car is what inspired me to take interest in them lol..How are the D2's holding up in the cold weather?
#686
Stay Low Pro Kinfolk
Ride is great, and they are holding up nicely, no problems whatsoever. Not sure about other sets of coils, but I remember reading these are Teflon-Coated to prevent things such as oxidation during the cold/wet weather.
They're great coilovers for the price, and as I stated before the wheels are as well.
And Tak, Jared is definitely the one who got me hooked on em in the first place. Pretty sure he wasn't the originator, but most definitely the one who rocked em the best.
#688
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Jared wasn't the best, considering he got them from dragon, but they are great wheels
#689
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Not a CL, but had to share
Picked up some WeatherTech Digital Fit Floor Liners for my 4Runner, and they are simply baller. I wore a hole through 2 pairs of Toyota OEM floormats, and never thought I'd spend $200 on a set of floor mats, but after spending $80 twice on OEM, I simply couldn't bear to spend more money on anything else. These floormats are the best I've ever seen, and wrap every inch and corner of the floor perfectly. They also have a lip all the way around to keep the water and shit from getting on the carpet underneath, the hole in my drivers floormat let everything run right off my shoes down onto the carpet underneath which I couldn't stand. If you drive your CL in winter, or even where it rains a lot, you definitely should look into a set of these. My CL doesn't see rain or snow, and I still think I'm going to pick up a set of these, just because they are such high quality and fit so perfectly. Here's a few pics
Front Driver's Side
Rear seat liner goes all the way across
Front Driver's Side
Rear seat liner goes all the way across
#692
Currently Post-Acura
They dont make them for the CL I had to settle for their all weather mats. But the drivers side one isn't big enough on the side so it slips because there is a gap between the trunk release and the hood release
#693
Senior Moderator
iTrader: (1)
http://www.weathertech.com/store/Pac...=0&PackageId=8
#694
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
That sucks, when I was messing around on their site, I got the impression that they did make them for the CL, but since I wasn't ordering for that car, I never went all the way, that really sucks.
#695
Currently Post-Acura
the website says they have these but they look ugly.
http://www.weathertech.com/store/Pac...=0&PackageId=8
http://www.weathertech.com/store/Pac...=0&PackageId=8
#696
07 tl-s in
Well, if a deal is too good to be true...it prob is. No CL for me right now.....The black 5speed was BEAT TO SHIT, and Clutch was slipping.....I had to pass, poor CL
#697
Senior Moderator
iTrader: (1)
sucks.
check these out
http://newjersey.craigslist.org/cto/2180460684.html
http://newjersey.craigslist.org/cto/2182296963.html
http://newjersey.craigslist.org/cto/2168659088.html
check these out
http://newjersey.craigslist.org/cto/2180460684.html
http://newjersey.craigslist.org/cto/2182296963.html
http://newjersey.craigslist.org/cto/2168659088.html
Last edited by asianspec; 01-28-2011 at 10:20 PM.
#702
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Could have sworn they made the floor liners for the CL, but damn are they impressive, still enjoying the shit out of them on the runner
#704
Pro
started purchasing pieces for a custom exhaust. also installed the heavier trunk springs that came with the stock spoiler i put on...no more blows to the back of the head FTW!
#705
I use my turn signals.
Join Date: Feb 2011
Location: Borelando, FLA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
#707
5th Gear
Join Date: Feb 2011
Location: Smyrna, DE
Age: 39
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Replaced my timing belt, balance shaft belt, water pump, valve cover gasket, seprentine belt, idler tensioner pulley, cam shaft seal, crank shaft seal, balance shaft seal, oil pump drive seal, Sway bar end links, upper control arms and ball joints, oil pan gasket, distributor o-ring, both O2 sensors, plugs, cap, wires, rotor, pcv valve. Been neglecting the car for a while but felt it was time considering daily work commute is 165 miles round trip...
#709
Pro
i didnt have the tool either...a ratchet with a small extension worked for me. it provided the right angle and leverage to get em in there. i had to spend ab an hour in the trunk w a flashlight...but worth it in my opinion
#710
Pro
Replaced my timing belt, balance shaft belt, water pump, valve cover gasket, seprentine belt, idler tensioner pulley, cam shaft seal, crank shaft seal, balance shaft seal, oil pump drive seal, Sway bar end links, upper control arms and ball joints, oil pan gasket, distributor o-ring, both O2 sensors, plugs, cap, wires, rotor, pcv valve. Been neglecting the car for a while but felt it was time considering daily work commute is 165 miles round trip...
#712
I use my turn signals.
Join Date: Feb 2011
Location: Borelando, FLA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Received replacement mounts and clutch today. Waiting for my skunk stuff to get here. Ordering D2 pro springs and Ralco RZ pulleys. Going foggy shopping when the Nationwide race is over.
#714
CL in lawnmower status
did some work on her today, notice how she's all blocked in, but this isn't so bad, it's already melted quite a bit here recently, there used to be a foot drift on the roof and barely recognizable under the snow
took the rack off
took the rack off
#717
Drifting
Been awhile, but I've been DD'ing the CL this week, and plan to continue to for the next couple weeks. Now, if I could just figure out why it's sucking so much gas (haven't opened anything up yet, just annoyed with it) then things will be golden. I'm used to the celica, where a tank lasts a week, whereas the CL, a tank lasts 4 days
#719
Instructor
Join Date: Sep 2010
Location: Hoffman Estates, IL
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
replaced the front pads, need to do something with the rotors, they are warped, but to lazy (broke) to do the conversion to rotor over hub. And dont want to spend the money to get new ones pressed in.