Out with the old, in with the new(er) - BlackAck's 4Runner thread
#521
Mods look great
The following users liked this post:
97BlackAckCL (10-31-2017)
#522
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
I had wanted to throw in my door speakers this past weekend, but my garage is still not usable and it rained all weekend, so that will have to wait till another day. However when I was working on the truck the mailman showed up and brought me more goodies.
And speaking of door speakers, I happened to look at the 6.5's that came out of my rear doors and wasn't happy to see this. I've been debating if I should try and clean up the contacts and reuse them or if I should just use it as an excuse to buy something new.... I already need another set of 6.5's for the rear hatch so I'm really leaning toward just buying 2 matching sets. Definitely wasn't happy when I saw this... Not sure I want to throw rusty components in a brand new vehicle...
And speaking of door speakers, I happened to look at the 6.5's that came out of my rear doors and wasn't happy to see this. I've been debating if I should try and clean up the contacts and reuse them or if I should just use it as an excuse to buy something new.... I already need another set of 6.5's for the rear hatch so I'm really leaning toward just buying 2 matching sets. Definitely wasn't happy when I saw this... Not sure I want to throw rusty components in a brand new vehicle...
The following users liked this post:
97BlackAckCL (10-31-2017)
#524
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
J, you never disappoint
The following users liked this post:
rockstar143 (10-31-2017)
#525
Any interior shots of the vehicle ?
#527
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
#528
The following users liked this post:
97BlackAckCL (10-31-2017)
#529
Moderator
I realize how huge the F150 is inside when I'm in other trucks. Was in the back of my dad's '09 Duramax & it's tiny compared to mine.
#530
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Is that the black laminate overlays for the badgers? Did you happen to find them for better than $80ish?
I need to redo my plastidip job and am tempted to get those instead so it'll last longer than 5 years.
I need to redo my plastidip job and am tempted to get those instead so it'll last longer than 5 years.
#531
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Yep, it's the OEM toyota overlays. Best price I found them for online was $78.49 shipped I can send you the link if you want.
#532
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,632
Received 3,848 Likes
on
2,575 Posts
Glad you finally started tearing into her. Now we need more pics.
The following users liked this post:
97BlackAckCL (11-01-2017)
#534
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
The following users liked this post:
97BlackAckCL (11-01-2017)
#536
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
The following users liked this post:
97BlackAckCL (11-02-2017)
#539
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
#541
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,632
Received 3,848 Likes
on
2,575 Posts
#543
Team Owner
iTrader: (4)
Hit me up if you need anything. You haven't had my package in a while....
The following users liked this post:
97BlackAckCL (11-02-2017)
#544
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
You're right, I haven't....
The following users liked this post:
Mr. Maker (11-02-2017)
#545
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
#546
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Well I got the door panel off, and was all set to install my 6x9's from my last truck in the doors, only to find out that they changed the screw holes and the adapter bracket that I've had for 2 4Runners will not work on this truck.
So since it was a nice day and I wanted to get something done I went to work swapping out all of the halogen bulbs with high power bright white SMD led bulbs
I got the dome, all 4 doors, and license plates switched out
I tried to get a shot of the dome, but I don't think it was dark enough
I love how bright these things are, the license plate LED's are SUPER freaking bright! I also replaced the reverse light bulbs, but hard to get a picture with your vehicle in reverse on the hill even with the parking brake on, but they're the same bulbs as these
Also, since I lost a clip the other day when I was putting in the high beam bulbs and I said the truck "wasn't new anymore" since I lost the clip, I had to rectify that...
So since it was a nice day and I wanted to get something done I went to work swapping out all of the halogen bulbs with high power bright white SMD led bulbs
I got the dome, all 4 doors, and license plates switched out
I tried to get a shot of the dome, but I don't think it was dark enough
I love how bright these things are, the license plate LED's are SUPER freaking bright! I also replaced the reverse light bulbs, but hard to get a picture with your vehicle in reverse on the hill even with the parking brake on, but they're the same bulbs as these
Also, since I lost a clip the other day when I was putting in the high beam bulbs and I said the truck "wasn't new anymore" since I lost the clip, I had to rectify that...
#547
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Here's a couple better pics of the LED bulbs, it's been too cold to do much else on the truck lately, and my garage is still not usable
Rear tailgate
Dome and map lights, outside the truck
Dome and mirror with the door open, these map lights are insanely bright
A shot from the back of the 2 domes
Rear tailgate
Dome and map lights, outside the truck
Dome and mirror with the door open, these map lights are insanely bright
A shot from the back of the 2 domes
#548
#549
By the way is that a Super Bowl ring on your finger ? God damm !
#550
Moderator
Not sure what this 'cold' stuff is that people keep talking about....
May have to look into those LEDs for the Flex, the incandescents are just barely brighter than candles.
May have to look into those LEDs for the Flex, the incandescents are just barely brighter than candles.
#551
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Nah, I wish it was. It's a college ring
#553
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
The following users liked this post:
97BlackAckCL (11-22-2017)
#555
#557
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
No. It's a dwarf / leg-amputee / masochist class rear seat.
#558
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Yes, I had to pay extra for it...
It's a full size seat, but there's definitely not much leg room though
It's a full size seat, but there's definitely not much leg room though
#559
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
Thread Starter
iTrader: (6)
Just a small update, but I finished my LED swap of all the incandescent bulbs. I swapped the puddle lights in the mirrors out, and now you can actually see them at night lol. Taking the mirrors apart was nerve racking and stressful but not overly complicated, still a lot of work just to change out a damn lightbulb though!
#560
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Do you have a dedicated thread on T4R or just the occasional daily thread? Although, I guess this one is fair game enough to ask questions on...
Where'd you source the LEDs?
And do you find the rear view camera works as well with the LED reverse lights? In my wagon, I keep thinking that the LEDs aren't as good as the incandescent I took out. Either they're too bright and are causing the camera to blow out the image, or it's the wavelength that is unfavorable to the sensor.
I'd like to replace all the lights in the truck soon and like how yours are shaping up.
Where'd you source the LEDs?
And do you find the rear view camera works as well with the LED reverse lights? In my wagon, I keep thinking that the LEDs aren't as good as the incandescent I took out. Either they're too bright and are causing the camera to blow out the image, or it's the wavelength that is unfavorable to the sensor.
I'd like to replace all the lights in the truck soon and like how yours are shaping up.