All Oregon Chat Thread
#2401
looks nice!! curious to see the 19s on there
#2405
would have to measure it out.. i am sure youll have to cut it.. you thinking of purchasing one? honestley i would think a newer RSX splitter would fit better then a old integra.. or maybe a newer Accord
#2406
i have my eyes on the rear roof spoiler i might want to purchase.. i wish they made a carbon one for our cars so it would match my front grill alittle..
#2407
I Quit
they don;t make them from the RSX
http://forums..com/showthread.php?p=22925353
those are running like like DC2, EK4 and EK9
http://forums..com/showthread.php?p=22925353
those are running like like DC2, EK4 and EK9
#2408
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
Chris your link got owned...
Well the sun is out, and im tired of having pretty wheels in my closet...so ya, you get the idea.
Ill have pics later on today.
Well the sun is out, and im tired of having pretty wheels in my closet...so ya, you get the idea.
Ill have pics later on today.
#2409
I Quit
#2411
Safety Car
iTrader: (2)
RE: Opposition to H.B. 2186
From: Rep Bentz (Bentz.Rep@state.or.us)
Sent: Tue 2/10/09 1:58 PM
To: Minkyu Lee (minkl81@hotmail.com)
Thank you for your message regarding House Bill 2186. This bill reflects a concept created in the Governor's office. It was then referred to the House Committee on Environment and Water (on which I serve as one of eight members). At the bill’s first hearing, held on Tuesday, February 3rd, I explained to the witnesses from the DEQ that I was not happy with the concepts contained in the bill. The delegation of power to the DEQ is far too great and the economic impact of the bill is too far reaching. The bill will, I am sure, require additional public hearings.
I represent District 60 (Malheur, Baker, Harney, and part of Grant County). I am certain that a majority of my constituents will oppose many of the ideas in the bill, particularly those which will negatively impact our economy. I would strongly suggest and recommend that you contact your state representative and share with him (or her) your thoughts regarding this bill.
Very Truly Yours,
Representative Cliff Bentz
District 60
From: Rep Bentz (Bentz.Rep@state.or.us)
Sent: Tue 2/10/09 1:58 PM
To: Minkyu Lee (minkl81@hotmail.com)
Thank you for your message regarding House Bill 2186. This bill reflects a concept created in the Governor's office. It was then referred to the House Committee on Environment and Water (on which I serve as one of eight members). At the bill’s first hearing, held on Tuesday, February 3rd, I explained to the witnesses from the DEQ that I was not happy with the concepts contained in the bill. The delegation of power to the DEQ is far too great and the economic impact of the bill is too far reaching. The bill will, I am sure, require additional public hearings.
I represent District 60 (Malheur, Baker, Harney, and part of Grant County). I am certain that a majority of my constituents will oppose many of the ideas in the bill, particularly those which will negatively impact our economy. I would strongly suggest and recommend that you contact your state representative and share with him (or her) your thoughts regarding this bill.
Very Truly Yours,
Representative Cliff Bentz
District 60
#2412
wow you got 1 up on me MIN i was gonna send a letter out this weekend too.. haha
#2414
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,641
Received 2,329 Likes
on
1,309 Posts
There will only be one or two reps/senators outside the Willamette Valley who would ever support that stupid idea. Oregon is very conservative east of Bend and south of Eugene.
#2415
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
Enough politics talk....
More car stuff.
You wanted pics of the new stance...
When i have a kid and teach him his ABC...S will be for Stance lol
Photo gallery Link
https://acurazine.com/forums/showthr...6#post10511406
More car stuff.
You wanted pics of the new stance...
When i have a kid and teach him his ABC...S will be for Stance lol
Photo gallery Link
https://acurazine.com/forums/showthr...6#post10511406
#2416
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,641
Received 2,329 Likes
on
1,309 Posts
That looks really good...
#2418
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
Ken: Thanks
Chris: if i had stretched tires i would have a gap again. and 20mm spacers are too much for me.
Plus i dont want my wheels looking like the bottom of a coke can so i could run single digit offset.
Chris: if i had stretched tires i would have a gap again. and 20mm spacers are too much for me.
Plus i dont want my wheels looking like the bottom of a coke can so i could run single digit offset.
#2419
Pro
Looks great Kyle! No negative camber? Is that with the spacers?
BTW, I took your advice and called Speed Concept. I have an appointment tomorrow to put in the Tokicos. Thanks.
A friend suggested that I call Clarke's because he's had good service from them. They wanted $112 to install each stock/strut! They also told me that I needed to replace the boots and mounts too - for another $150! Speed told me that it's rare that the boots and mounts need to be replaced. Just for giggles, I priced out the boots and mounts at Excelerate's web site - Tokico struts and boots would cost me < $70 total. Clarke's FTL.
BTW, I took your advice and called Speed Concept. I have an appointment tomorrow to put in the Tokicos. Thanks.
A friend suggested that I call Clarke's because he's had good service from them. They wanted $112 to install each stock/strut! They also told me that I needed to replace the boots and mounts too - for another $150! Speed told me that it's rare that the boots and mounts need to be replaced. Just for giggles, I priced out the boots and mounts at Excelerate's web site - Tokico struts and boots would cost me < $70 total. Clarke's FTL.
#2420
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
Looks great Kyle! No negative camber? Is that with the spacers?
BTW, I took your advice and called Speed Concept. I have an appointment tomorrow to put in the Tokicos. Thanks.
A friend suggested that I call Clarke's because he's had good service from them. They wanted $112 to install each stock/strut! They also told me that I needed to replace the boots and mounts too - for another $150! Speed told me that it's rare that the boots and mounts need to be replaced. Just for giggles, I priced out the boots and mounts at Excelerate's web site - Tokico struts and boots would cost me < $70 total. Clarke's FTL.
BTW, I took your advice and called Speed Concept. I have an appointment tomorrow to put in the Tokicos. Thanks.
A friend suggested that I call Clarke's because he's had good service from them. They wanted $112 to install each stock/strut! They also told me that I needed to replace the boots and mounts too - for another $150! Speed told me that it's rare that the boots and mounts need to be replaced. Just for giggles, I priced out the boots and mounts at Excelerate's web site - Tokico struts and boots would cost me < $70 total. Clarke's FTL.
I am running -.5 camber up front and -1.5 rear.
#2421
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
So i just saw this....
http://jalopnik.com/5151428/2010-acu...hp-35+liter-v6
This could be big for TL guys, now that the TSX will have the same motor there will be parts made for my motor!!!
<3 TSX having jdm rooots
http://jalopnik.com/5151428/2010-acu...hp-35+liter-v6
The 2010 Acura TSX will get the same 280 HP 3.5-Liter V6 found in the Acura TL, curing the biggest problem we have with the 2009 TSX.
This could be big for TL guys, now that the TSX will have the same motor there will be parts made for my motor!!!
<3 TSX having jdm rooots
#2422
haha.. we can only hope that hondata will make a reflash or something for the engine if they do decide to go through with it
#2423
slow day for everyone.. Kyle any luck on the job hunt?
#2424
I Quit
I've heard one million and one rumors on the TSX engine, there were speculations on the V6, the turbo K in the RDX, SHAWD, etc... none have been anything more than rumors.
#2425
ya ill believe it when i see it.. would be nice to either have the v6 or the turbo diesel would deff make a funner car to drive
#2426
Safety Car
iTrader: (2)
i was shocked yesterday over at v t e c.net when i read a article about new engine for the tsx. i pretty much knew that it'll be a v6, but tl's 3.5l?? i was like what~!!! that's unfair when i just purchased a life time oil change!! haha.. damn...
stopped by at speed to grab some stuffs for minor mods and saw a 2g tl-s with dc header, comptech intake, etc...
anyways... time to start some mods
stopped by at speed to grab some stuffs for minor mods and saw a 2g tl-s with dc header, comptech intake, etc...
anyways... time to start some mods
#2428
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
Nothing
Hmmm...sounds like someone we know...
Min you need to get new wheels, lately ive been getting alot of texts about people seeing me on 217...i havnt been on 217 in months.
i was shocked yesterday over at v t e c.net when i read a article about new engine for the tsx. i pretty much knew that it'll be a v6, but tl's 3.5l?? i was like what~!!! that's unfair when i just purchased a life time oil change!! haha.. damn...
stopped by at speed to grab some stuffs for minor mods and saw a 2g tl-s with dc header, comptech intake, etc...
anyways... time to start some mods
stopped by at speed to grab some stuffs for minor mods and saw a 2g tl-s with dc header, comptech intake, etc...
anyways... time to start some mods
Hmmm...sounds like someone we know...
Min you need to get new wheels, lately ive been getting alot of texts about people seeing me on 217...i havnt been on 217 in months.
#2429
Pro
I did see an SSM 3G parked outside SC with tinted wiindows and lowered with some gunmetal (I think) rims and stock exhaust. I didn't stay around long enough to notice what brand.
Last edited by bonknhead; 02-12-2009 at 05:07 PM.
#2430
hey chris have you changed out your highbeam bulbs at all? I changed mine and they seem darker.. i also notice the connector has a copper and a silver side so i am curious if the copper has the black wire going to it or the white (think its white anyway)
#2431
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
So i had someone in my car today
FUUUUUUUUUUUUU- i rub....
Rears rub when turning...So i made a appointment to add some more camber tomorrow.
Fronts are rubbing my damn bumper now...so ill trim some of that back tomorrow.
Damnit it never ends...Maybe i should just get 215's....
FUUUUUUUUUUUUU- i rub....
Rears rub when turning...So i made a appointment to add some more camber tomorrow.
Fronts are rubbing my damn bumper now...so ill trim some of that back tomorrow.
Damnit it never ends...Maybe i should just get 215's....
#2432
Safety Car
iTrader: (2)
haha... i've been wanting new wheels but my gf's been strongly opposing until this month. for the last two or three months, i kindly explained her the benefits of new wheels (such as weight saving = better mpg ), plus it won't cost me much since selling the aspecs will offset the cost.
not official approval to buy but she wants to review the choice of wheels that i want. first one was no go (rpf-1...)
Yeah, that was my extremely dirty 2G SSM TL-S. Nick put the Tokico blues in - the ride is so much better than the old stockers! I didn't see your TL-S Min though - I was down the street at Arby's (friend is owner/operator) until he was done with the install.
I did see an SSM 3G parked outside SC with tinted wiindows and lowered with some gunmetal (I think) rims and stock exhaust. I didn't stay around long enough to notice what brand.
I did see an SSM 3G parked outside SC with tinted wiindows and lowered with some gunmetal (I think) rims and stock exhaust. I didn't stay around long enough to notice what brand.
3g ssm? hmmm never seen that one before..
#2433
Safety Car
iTrader: (2)
So i had someone in my car today
FUUUUUUUUUUUUU- i rub....
Rears rub when turning...So i made a appointment to add some more camber tomorrow.
Fronts are rubbing my damn bumper now...so ill trim some of that back tomorrow.
Damnit it never ends...Maybe i should just get 215's....
FUUUUUUUUUUUUU- i rub....
Rears rub when turning...So i made a appointment to add some more camber tomorrow.
Fronts are rubbing my damn bumper now...so ill trim some of that back tomorrow.
Damnit it never ends...Maybe i should just get 215's....
are you running 225 right now? 215s are too narrow for 3g tl. just raise up a bit
#2434
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
haha... i've been wanting new wheels but my gf's been strongly opposing until this month. for the last two or three months, i kindly explained her the benefits of new wheels (such as weight saving = better mpg ), plus it won't cost me much since selling the aspecs will offset the cost.
not official approval to buy but she wants to review the choice of wheels that i want. first one was no go (rpf-1...)
not official approval to buy but she wants to review the choice of wheels that i want. first one was no go (rpf-1...)
And raise my car?!?! i already made that sacrifice once this year...Although i did even out the passenger side today, and when it was raised on the jack it looked really good about 1 inch higher.
#2435
Safety Car
iTrader: (2)
slightly stretching the 225s will be okay i think. that 10mm difference is huge when talking about fender clearance.
man... i only did half of what i was going to work on my car today...
weather was too cold and paints wont stick that good. good thing i painted the engine covers first before painting bottom of my front lip.
also i thought 9006 bulbs will fit in the fogs but it didn't work out either. will have to exchange for the H8 hid kit.
i did manage to cut about quarter inch of intake so filter sits bit higher than before.
btw... anyone needs a led panel interior light? this will fit in the tsx's dome light. i totally forgot that tl's interior lights were plug in type... bought it for 12.99 today and will sell for 10. chris, you'll need this one
https://acurazine.com/forums/3g-tl-photograph-gallery-96/minor-tweaking-autozone-impulse-buy-not-recommended-709998/
man... i only did half of what i was going to work on my car today...
weather was too cold and paints wont stick that good. good thing i painted the engine covers first before painting bottom of my front lip.
also i thought 9006 bulbs will fit in the fogs but it didn't work out either. will have to exchange for the H8 hid kit.
i did manage to cut about quarter inch of intake so filter sits bit higher than before.
btw... anyone needs a led panel interior light? this will fit in the tsx's dome light. i totally forgot that tl's interior lights were plug in type... bought it for 12.99 today and will sell for 10. chris, you'll need this one
https://acurazine.com/forums/3g-tl-photograph-gallery-96/minor-tweaking-autozone-impulse-buy-not-recommended-709998/
#2436
I Quit
Brandon - Never changed the high beams before, but I have changed the HIDs and fogs
Kyle - Raise her up an 1/8th
Min - will that LED light give me some extra HP or some much need torque?
Kyle - Raise her up an 1/8th
Min - will that LED light give me some extra HP or some much need torque?
#2437
Nikon Neck Beard Krew
Thread Starter
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
So i drove around tonight with my girl and the only time i rubbed was on the portion of the front bumper that sticks out more than the fender. This will get fixed tomorrow, but more than likely ill just run these tires untill they are too chewed up and get some 225's.
So i just cant weigh down my car and im fine.
So i just cant weigh down my car and im fine.