The Official Honda S2000 Thread
#4521
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Thanks Tyler..
doesn't help that I'm a bit of a maniac when it comes to installing stuff quickly...plus, I already knew all the mods that I liked from the previous one and it's my 2nd time installing the exact same thing so learning curve is a little shorter.
doesn't help that I'm a bit of a maniac when it comes to installing stuff quickly...plus, I already knew all the mods that I liked from the previous one and it's my 2nd time installing the exact same thing so learning curve is a little shorter.
#4522
Turd Polisher
iTrader: (1)
Stoked, my helmets came in! I was a little hesitant buying them on Amazon because I wasn't sure how the sizing would work, but XL fits me perfectly and I got a medium size for the gf
#4524
Turd Polisher
iTrader: (1)
:gheyhug:
What's your next mod J? New wheels?
What's your next mod J? New wheels?
#4527
Team Owner
#4528
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
I'm an XL too!
Hearing the exhaust this morning wasn't as harsh. Either way, found a huge crack on the flange of my stock cat...probably part of why it was so loud and clanky...gonna have that welded and try stock cat with the UK mod and see how I dig it.
Hearing the exhaust this morning wasn't as harsh. Either way, found a huge crack on the flange of my stock cat...probably part of why it was so loud and clanky...gonna have that welded and try stock cat with the UK mod and see how I dig it.
#4529
Turd Polisher
iTrader: (1)
Does it rasp under hard acceleration? What about quick down shifts?
Mine only rasps when I'm free-revving from a stand still .
Mine only rasps when I'm free-revving from a stand still .
#4530
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Hearing it this morning, it's not as bad as I thought...
regardless I'm getting the stock cat re-welded...or ordering the berk high flow...
I think the main thing that's annoying me is that something is touching...maybe a heat shield or something...on the way back from the grocery store I did top up and I heard something at a certain rpm was making a sound from the spare tire area.
regardless I'm getting the stock cat re-welded...or ordering the berk high flow...
I think the main thing that's annoying me is that something is touching...maybe a heat shield or something...on the way back from the grocery store I did top up and I heard something at a certain rpm was making a sound from the spare tire area.
#4531
Turd Polisher
iTrader: (1)
Your poor neighbors
Nice garage by the way!
Nice garage by the way!
#4532
Senior Moderator
Sounds like something's loose in that video. There's definitely a rasp there as well. Otherwise doesn't sound too bad.
#4533
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Thanks...
I can't fathom what...O2 sensor tight...all 5 bolts, tight...has to be a heat shield or something I bent into the way.
Either way, going to get my stock catalytic flange re-welded and try throwing that one.
Berk name brand is fkng pricey...and on backorder...found another brand...metal cell construction etc...$120 shipped. I think I'll give it a shot.
I can't fathom what...O2 sensor tight...all 5 bolts, tight...has to be a heat shield or something I bent into the way.
Either way, going to get my stock catalytic flange re-welded and try throwing that one.
Berk name brand is fkng pricey...and on backorder...found another brand...metal cell construction etc...$120 shipped. I think I'll give it a shot.
#4535
Team Owner
Thanks...
I can't fathom what...O2 sensor tight...all 5 bolts, tight...has to be a heat shield or something I bent into the way.
Either way, going to get my stock catalytic flange re-welded and try throwing that one.
Berk name brand is fkng pricey...and on backorder...found another brand...metal cell construction etc...$120 shipped. I think I'll give it a shot.
I can't fathom what...O2 sensor tight...all 5 bolts, tight...has to be a heat shield or something I bent into the way.
Either way, going to get my stock catalytic flange re-welded and try throwing that one.
Berk name brand is fkng pricey...and on backorder...found another brand...metal cell construction etc...$120 shipped. I think I'll give it a shot.
It is just a metal tube. As long as the fitment is good, i think they are all pretty much the same same.
#4541
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
My only gripe with the Berk is the cost and the wait time...realistically, it's just a magnaflow cat...
I'll likely end up getting a high flow...better than the rasp that the test pipe introduces, although I really loved the sound more today. Maybe it broke in!?!?
I actually love the UK mod though...sound, no extra real cost...and the beautiful stock ap2 looks.
Either way...my good friend fixed the busted weld on stock cat so I'll try putting that back on unless I decide to re-order the high flow cat.
Some pictures of the process along with new vid
DSC_8204 by swimex37, on Flickr
DSC_8196 by swimex37, on Flickr
DSC_8193 by swimex37, on Flickr
DSC_8201 by swimex37, on Flickr
DSC_8206 by swimex37, on Flickr
I'll likely end up getting a high flow...better than the rasp that the test pipe introduces, although I really loved the sound more today. Maybe it broke in!?!?
I actually love the UK mod though...sound, no extra real cost...and the beautiful stock ap2 looks.
Either way...my good friend fixed the busted weld on stock cat so I'll try putting that back on unless I decide to re-order the high flow cat.
Some pictures of the process along with new vid
DSC_8204 by swimex37, on Flickr
DSC_8196 by swimex37, on Flickr
DSC_8193 by swimex37, on Flickr
DSC_8201 by swimex37, on Flickr
DSC_8206 by swimex37, on Flickr
The following users liked this post:
TacoBello (04-14-2015)
#4542
Team Owner
Is the sound from that video primarily coming from the UK mod or the test pipe?
I know S2000 with just a test pipe does not sound like that...Maybe it is a new thing.. never heard of UK exhaust mod.
Edit: did some searching on the UK mod... makes me wonder who came up with shit like that, cuz i know i do not stare at my exhaust to see which 2 pipes i can connect together.
Sounds good tho.
I know S2000 with just a test pipe does not sound like that...Maybe it is a new thing.. never heard of UK exhaust mod.
Edit: did some searching on the UK mod... makes me wonder who came up with shit like that, cuz i know i do not stare at my exhaust to see which 2 pipes i can connect together.
Sounds good tho.
Last edited by oonowindoo; 04-15-2015 at 02:14 AM.
The following users liked this post:
rockstar143 (04-15-2015)
#4543
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
I can't honestly say...because I did both at the same time. BUT, that said...got the stock cat welded up where it cracked and I'm gonna throw that on today. I'll be able to tell you where it came from once I hear how it sounds after. There's a chance I'll reorder the high flow if it quiets it down too much.
Not gonna lie though...the raw sound is growing on me. Was fun driving in this morning...just a little more muted and no rasp/drone would be perfection!
Not gonna lie though...the raw sound is growing on me. Was fun driving in this morning...just a little more muted and no rasp/drone would be perfection!
#4544
Team Owner
Do you think instead of doing the UK mod on both mufflers, just do 1 side will help?
#4545
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
I am not sure...I love the sound...think it might be weird out of one side only?!?!
Not a bad idea though!
I'm a weirdo...at $120...I pulled the trigger on the high flow cat. I know it'll bug me to be back to stock cat and skipping rasp on the test pipe will be a good thing.
Not a bad idea though!
I'm a weirdo...at $120...I pulled the trigger on the high flow cat. I know it'll bug me to be back to stock cat and skipping rasp on the test pipe will be a good thing.
#4546
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
stock cat back on...car sounds better but a little toned down. Somewhere between the test pipe and the stock cat is perfect. HFC ordered...
UK mod is a go though...if you want a little vrrom vroom sound from the back instead of only being engine sound...this is a no brainer. I love the ap2 stock exhaust look to begin with...and hate the cost of most of the dual aftermarket cat backs.
UK mod is a go though...if you want a little vrrom vroom sound from the back instead of only being engine sound...this is a no brainer. I love the ap2 stock exhaust look to begin with...and hate the cost of most of the dual aftermarket cat backs.
#4547
Drifting
iTrader: (13)
[QUOTE=rockstar143;15401978]on the way back from the grocery store I did top up and I heard something at a certain rpm was making a sound from the spare tire area. /QUOTE]
Did you check to make sure everything was tightened down on the spare itself?
Did you check to make sure everything was tightened down on the spare itself?
#4548
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Thanks Dave...actually, it was one of the extra portion of the clamp I used for the wrap I put on...I bent it up, and it's gone.
UK mod is a must have if you're not into spending oodles on exhaust. I needed a little more VTECFKYES...without too much for wife to hate the car again.
In other news...
Fenders are all rolled...liners trimmed...tab relocated and touch up paint applied.
Fuck virgin fenders...
UK mod is a must have if you're not into spending oodles on exhaust. I needed a little more VTECFKYES...without too much for wife to hate the car again.
In other news...
Fenders are all rolled...liners trimmed...tab relocated and touch up paint applied.
Fuck virgin fenders...
#4550
Turd Polisher
iTrader: (1)
I did my very first AutoX event today and it was a blast. SCCA throws a really well organized event and I was apart of the 2nd run group. Not only did I run 5 heats, I rode shotgun with other drivers to get more familiarized with the track (Other S2000s, Caterham 260, tuned STI w/ Hoosier slicks).
From the get-go, the track was not very well prepped and I was pretty much the only guy out there with worn out All Seasons (35 psi in front, 30 psi in the rear) Due to a thin coat of sand / dust on the track, it made for lots of understeer if the car's weight where it shouldn't have been and made for lots of oversteer if you gave it the VTAK (as demonstrated in the video below). Tommy Salami hit the nail right on the head, a front sway bar & some proper tires are absolutely essential.
A few other AP1 S2000s running Potenza RE11s / Dunlop Star Specs were posting around 62 - 64 seconds around this track. 5th run, I ran 66.2 seconds with my girlfriend riding shotgun
Times:
1: 69.3
2: 67.8
3: 67.7
4: 66.6
5: 66.2
After watching the onboard footage, I see a lot of areas of improvement (not bouncing the rev-limiter off first for starters )
Fastest run below, excuse my commentary.
From the get-go, the track was not very well prepped and I was pretty much the only guy out there with worn out All Seasons (35 psi in front, 30 psi in the rear) Due to a thin coat of sand / dust on the track, it made for lots of understeer if the car's weight where it shouldn't have been and made for lots of oversteer if you gave it the VTAK (as demonstrated in the video below). Tommy Salami hit the nail right on the head, a front sway bar & some proper tires are absolutely essential.
A few other AP1 S2000s running Potenza RE11s / Dunlop Star Specs were posting around 62 - 64 seconds around this track. 5th run, I ran 66.2 seconds with my girlfriend riding shotgun
Times:
1: 69.3
2: 67.8
3: 67.7
4: 66.6
5: 66.2
After watching the onboard footage, I see a lot of areas of improvement (not bouncing the rev-limiter off first for starters )
Fastest run below, excuse my commentary.
The following 5 users liked this post by TylerT:
00TL-P3.2 (04-24-2015),
crazyasiantl (05-01-2015),
Ken1997TL (04-21-2015),
rockstar143 (04-20-2015),
Undying Dreams (04-30-2015)
#4551
I drive a Subata.
iTrader: (1)
AWESOME! That actually looks pretty fun!
The following users liked this post:
rockstar143 (04-20-2015)
#4553
Turd Polisher
iTrader: (1)
You should give AutoX a try once of these days.
There was an FRS on 17x7" RPF1s w/ RS3s (235 square setup) and he was consistently posting 62-63 seconds - an older Corvette Z06 was posting 62 on slicks .. so it ain't all about powah.
Thanks!
Once I get the car a little more prepped for AutoX I plan on attending more events in the future.
There was a woman in her mid 40s who was rocking an exact clone of your car - same color, black RPF1s, great tire setup, same ride height.
She was consistently posting 62 second times
There was an FRS on 17x7" RPF1s w/ RS3s (235 square setup) and he was consistently posting 62-63 seconds - an older Corvette Z06 was posting 62 on slicks .. so it ain't all about powah.
Thanks!
Once I get the car a little more prepped for AutoX I plan on attending more events in the future.
There was a woman in her mid 40s who was rocking an exact clone of your car - same color, black RPF1s, great tire setup, same ride height.
She was consistently posting 62 second times
#4554
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Tyler...
more vids of Mrs Tyler, mkay?!?!
Seriously though...looks like a great time, man. Loved the video. Thanks for sharing.
Well, I got a killer deal on wheels I'd been eyeballing. Fenders rolled, bumpers trimmed, tab moved back...golden...no rubbing. Also put in the ecoated black premium centric rotors, cleaned up the pads, regreased everything and painted calipers black.
Thanks to Dennis' recommendation, I went Sumi HTR Z3...215/245 stock combo...wheels are 17*8 +45 and 17*9 +42 (funny, what I ordered was +35, which I was afraid wouldn't fit well...what arrived was 42 which wasn't even an option on the site. I was SOOO relieved! ).
Anyway
started with my mu lugs, but after painting caliper, I switched to the black ones.
DSC_8397 by swimex37, on Flickr
DSC_8370 by swimex37, on Flickr
DSC_8390 by swimex37, on Flickr
DSC_8392 by swimex37, on Flickr
Dave...trust me, you want the 38MM UK mod. in driving it around all weekend, I can tell you, it gives you a little of that vroom vroom sound out the rear that you crave, without the cost or giving up the great looks of the stock exhaust. Test pipe too much rasp...stock cat actually sounds great with it, but I had already ordered the high flow cat and it was shipped so I'll give that a shot. The crackling noises I was hearing were actually from the crack in the stock cat flange, and the deterioration of this weird white stuff (insulation) between the heat shield and the cat.
I'd highly recommend UK mod.
DSC_8400 by swimex37, on Flickr
DSC_8402 by swimex37, on Flickr
DSC_8376 by swimex37, on Flickr
more vids of Mrs Tyler, mkay?!?!
Seriously though...looks like a great time, man. Loved the video. Thanks for sharing.
Well, I got a killer deal on wheels I'd been eyeballing. Fenders rolled, bumpers trimmed, tab moved back...golden...no rubbing. Also put in the ecoated black premium centric rotors, cleaned up the pads, regreased everything and painted calipers black.
Thanks to Dennis' recommendation, I went Sumi HTR Z3...215/245 stock combo...wheels are 17*8 +45 and 17*9 +42 (funny, what I ordered was +35, which I was afraid wouldn't fit well...what arrived was 42 which wasn't even an option on the site. I was SOOO relieved! ).
Anyway
started with my mu lugs, but after painting caliper, I switched to the black ones.
DSC_8397 by swimex37, on Flickr
DSC_8370 by swimex37, on Flickr
DSC_8390 by swimex37, on Flickr
DSC_8392 by swimex37, on Flickr
Dave...trust me, you want the 38MM UK mod. in driving it around all weekend, I can tell you, it gives you a little of that vroom vroom sound out the rear that you crave, without the cost or giving up the great looks of the stock exhaust. Test pipe too much rasp...stock cat actually sounds great with it, but I had already ordered the high flow cat and it was shipped so I'll give that a shot. The crackling noises I was hearing were actually from the crack in the stock cat flange, and the deterioration of this weird white stuff (insulation) between the heat shield and the cat.
I'd highly recommend UK mod.
DSC_8400 by swimex37, on Flickr
DSC_8402 by swimex37, on Flickr
DSC_8376 by swimex37, on Flickr
The following users liked this post:
rockstar143 (04-20-2015)
#4557
Team Owner
wow those look big for 17".
#4558
I drive a Subata.
iTrader: (1)
Looks ly! Congrats man!
@Tyler
I've thought about doing some AutoX sessions, but for some reason, I'm not that into it. I know a lot of FRS/BRZ members on the forum are getting a great results from AutoX though.
@Tyler
I've thought about doing some AutoX sessions, but for some reason, I'm not that into it. I know a lot of FRS/BRZ members on the forum are getting a great results from AutoX though.
The following users liked this post:
rockstar143 (04-20-2015)
#4560
Team Owner
thinking about getting the AP1 rear spoiler? I heard you can get a used one for $100 now.
i think 17x9 with 42 is perfect.
i think low 30s will require some ridiculous camber or 225 tires. Not worth it.
i think 17x9 with 42 is perfect.
i think low 30s will require some ridiculous camber or 225 tires. Not worth it.
Last edited by oonowindoo; 04-20-2015 at 05:58 PM.
The following users liked this post:
rockstar143 (04-20-2015)