Official RAYS ENGINEERING/VOLK RACING wheel thread.
#481
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
Originally Posted by Revolution SignWorks
i heard a container is coming from japan to mackin this week...so the my volks should be here! i hope!
#482
OMGWTF4THGENTL
iTrader: (2)
Originally Posted by ACCURATEin
Kennedy you're going to be the official Volk master guinea pig before it's all said and done. First your purchase of the GT-7's, now these TE-37s, and finally the GT-S's when they arrive.
I believe both the GT-7s and TE-37s originated from Charlotte! The GT-7s were on one of the Acura managers SSM, and those TE-37s were purchased from Desmond Performance where i used to visit.
I believe both the GT-7s and TE-37s originated from Charlotte! The GT-7s were on one of the Acura managers SSM, and those TE-37s were purchased from Desmond Performance where i used to visit.
The GT-7's lip was trashed due to chemicals... I found a guy that will hand sand the trashed annodization off, and hand polish them back to new. He's finished one and it's really like new... Better than new actually, in that the finished can never be ruined again, as long as I hit em with some mequires billet once every week or so...
but as with anything Ray's... It's taking forever to get the last three. I expect them any day now. The guy doing the polishing is this crazy old hippy driving a late 60's VW van low rider. He works only cash, i figure for weed...
I'll definately be keeping the TE37s... I love em.
I'll be passing on either the GT-7s or the GT-S's. I don't need three sets...
To be honest, It'll be 90 days in a week since i ordered the GT-Ss. I may just try to get OUT of the GT-S order. I'm very happy with both sets of what I have. It's so wierd both of these sets popped up for sale, AFTER my order.
#483
OMGWTF4THGENTL
iTrader: (2)
Originally Posted by JD TL-S
Thanks Kennedy. Now I understand the chart A,B,C. Thats the high, med, low pad. A while back I believe you told me about the pad size. But I didn't know what that was. I have the Rays All Products book. I have read it, but it doesn't say what A,B,C is. Now I know what you mean. Its the pad height. As you know alot, I am all new to wheel technical terms and knowledge. I have been all over this forum, and making many phone calls with so many diff answers. How can I know what to need when people selling them are all telling me diff things. I see the diagram of the GT-C with face-1 and face-2. Face 1 is flat for what I need, where face 2 would be for RWD cars-deepdish. The GT-S has only 1 diagram, 1 face.
I called 2 places sat. but they were closed, I would of gotten more answers and probably ordered them already. I e-mailed Mackin Ind. with a detailed question. I will get the GT-S in A (high) pad with a +36 offset. So if my stock wheels are 8" wide with an offset of +45mm, The GT-S in 8.5" with +36mm offset will be about 9mm farther out towards the fender, plus half of the wheel difference 8"-8.5" =1/4" or 6mm more. So it will be 9mm+6mm=15mm closer to the fender of the body. Thats about 9/16 inch. Am I correct here (I HOPE)
I called 2 places sat. but they were closed, I would of gotten more answers and probably ordered them already. I e-mailed Mackin Ind. with a detailed question. I will get the GT-S in A (high) pad with a +36 offset. So if my stock wheels are 8" wide with an offset of +45mm, The GT-S in 8.5" with +36mm offset will be about 9mm farther out towards the fender, plus half of the wheel difference 8"-8.5" =1/4" or 6mm more. So it will be 9mm+6mm=15mm closer to the fender of the body. Thats about 9/16 inch. Am I correct here (I HOPE)
As for you other comment... PERFECT. You get it.
Those GT-S will ride 15mm wider than stock, and that's NOT outside the fender. It IS close, and if you drop lower than 1in, you MAY slightly rub your inner rear fender whne your wheel stuffs. A quick fender roll will solve any problem you have, and again, IF you rub is predominantly determined by your tire choice and size.
Congrat.
Get yourself some black G2 paint for those rear calipers. Give ya something to do while you wait.
#484
Safety Car
iTrader: (1)
Join Date: Apr 2007
Location: Northern ILLINOIS
Age: 62
Posts: 4,848
Received 134 Likes
on
130 Posts
Whats strange is I was out measuring and noticed my rear fender had part of it rolled, about 40%? The rest is 90 degrees? Now I am wondering if I should of ordered the Teins? I was thinking 245-35-19. But might have to get 235-35-19. I don't mind rolling, but I only have seen pics of the machine, no idea who does that around crappy Chicago? I am glad I figured out all the info in the catalog. Well you told me over and over, I just understand better. I wish I could get the GT-S pad B with +46 offset, wouldn't have to worry about scrapping. Plus with the A pad and +36 offset, the front tire will be flush with the front fender, and 1/4" in on the rear. OH BOY. Thanks again BRO!!!
#485
Kinda OT, but I have a set of Rays Lexion Type 203 with a polished lip...whats the best way to clean em? I've been using meguires gold class car soap lol....I put a coat of wax on them when I first had them installed as well....what do you guys think?
#486
Safety Car
iTrader: (1)
Join Date: Apr 2007
Location: Northern ILLINOIS
Age: 62
Posts: 4,848
Received 134 Likes
on
130 Posts
Originally Posted by JJaber06
Kinda OT, but I have a set of Rays Lexion Type 203 with a polished lip...whats the best way to clean em? I've been using meguires gold class car soap lol....I put a coat of wax on them when I first had them installed as well....what do you guys think?
The following users liked this post:
JD TL-S (04-07-2012)
#491
Originally Posted by Blitz
Beautiful! Close ups front and rear please.
Can you provide any additional info. Pad "*", Offset, Supplier, Ballpark price, etc.
Thanks.
Can you provide any additional info. Pad "*", Offset, Supplier, Ballpark price, etc.
Thanks.
offset: +49, supplier: Upgrade motoring.com,price: 5 Volk GT-S $2,847.50/ rays lugs $135.00/ 5 center caps $150.00/ 5 nitto nt555 235/35/19 $860.00 total $3,992.50
I don't have any close ups but I'll get some
#492
Originally Posted by Blitz
Beautiful! Close ups front and rear please.
Can you provide any additional info. Pad "*", Offset, Supplier, Ballpark price, etc.
Thanks.
Can you provide any additional info. Pad "*", Offset, Supplier, Ballpark price, etc.
Thanks.
The following users liked this post:
JD TL-S (04-07-2012)
#493
Safety Car
iTrader: (1)
Join Date: Apr 2007
Location: Northern ILLINOIS
Age: 62
Posts: 4,848
Received 134 Likes
on
130 Posts
Yah, very nice GT-S. I guess they would look good on my ASM 07 TL-S. I just got a quote for 19X8.5 GT-S, Toyo T1R 245-35-19, with center caps, lugs, locking lugs, mounted, balanced for $3450. I saw those Work Varianza T1S on that IS350, and now I have a choice to make. Which one looks best on my 07 ASM TL-S?
What pad, A,B,C, is it C? They must be 19x8" offset pad C.
What pad, A,B,C, is it C? They must be 19x8" offset pad C.
#495
Safety Car
iTrader: (1)
Join Date: Apr 2007
Location: Northern ILLINOIS
Age: 62
Posts: 4,848
Received 134 Likes
on
130 Posts
Originally Posted by JJaber06
I'd deff get the Work wheels JD, they look hotttt
#497
Safety Car
iTrader: (1)
Join Date: Apr 2007
Location: Northern ILLINOIS
Age: 62
Posts: 4,848
Received 134 Likes
on
130 Posts
Originally Posted by JJaber06
Work wheels are extremely high end and most of them are very light 2 or 3 piece designs. I'd say they're right up there with Volks, if not higher.
#498
Recently turned 18
Originally Posted by DUECE_DXJ
full size 5th spare
Gunmetal GT-S + ABP = The sex
Originally Posted by mr.almeida
Now that's just Stupid Sexy right there!
#500
Originally Posted by Kennedy
Full size spare... ? That's silly, especially if you're running directional sport tires.
If that's the case, you need 2 full size spares, one for each side.
If that's the case, you need 2 full size spares, one for each side.
I just order another one
#501
Originally Posted by Kennedy
Full size spare... ? That's silly, especially if you're running directional sport tires.
If that's the case, you need 2 full size spares, one for each side.
If that's the case, you need 2 full size spares, one for each side.
maybe for but the main reason I bought a 5th wheel is in case something happened to one of my wheels I don'thave to wait months with 3 wheels so for me it's not silly.did you know I can have the directions of the tires changed
#502
OMGWTF4THGENTL
iTrader: (2)
Originally Posted by DUECE_DXJ
maybe for but the main reason I bought a 5th wheel is in case something happened to one of my wheels I don'thave to wait months with 3 wheels so for me it's not silly.did you know I can have the directions of the tires changed
I was being fecicious. Makes sense to have a spare for exactly that reason... Not sure I would carry it my trunk loosely. That could make a big mess in an accident.
#503
Originally Posted by Kennedy
No way! you can change tire directions?
I was being fecicious. Makes sense to have a spare for exactly that reason... Not sure I would carry it my trunk loosely. That could make a big mess in an accident.
I was being fecicious. Makes sense to have a spare for exactly that reason... Not sure I would carry it my trunk loosely. That could make a big mess in an accident.
#504
Originally Posted by Kennedy
No way! you can change tire directions?
I was being fecicious. Makes sense to have a spare for exactly that reason... Not sure I would carry it my trunk loosely. That could make a big mess in an accident.
I was being fecicious. Makes sense to have a spare for exactly that reason... Not sure I would carry it my trunk loosely. That could make a big mess in an accident.
#506
Originally Posted by Kennedy
Oh wow... That's cool.
I prefer the all stock look, afraid my suitcase would scrtch that bird up throwing it in, but that's slick looking.
I prefer the all stock look, afraid my suitcase would scrtch that bird up throwing it in, but that's slick looking.
they also made a cutout that goes around the wheel so it can be flush and flat when I want to put this on top.
#507
tehLEGOman
Thread Starter
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,228
Received 1,983 Likes
on
1,336 Posts
I think me and deuce are on the same wavelength....i've also got a 5th wheel and it sits in the trunk.
#511
8AT > 6MT
Originally Posted by ACCURATEin
I think me and deuce are on the same wavelength....i've also got a 5th wheel and it sits in the trunk.
yeah you guys are homo i should have bought a 5th wheel...i guess when you're spending 2000+ what's another 6 bills...
BTW deuce...what kinda rolex do you have?
#512
Originally Posted by Revolution SignWorks
yeah you guys are homo i should have bought a 5th wheel...i guess when you're spending 2000+ what's another 6 bills...
BTW deuce...what kinda rolex do you have?
BTW deuce...what kinda rolex do you have?
GMT master II
#515
Originally Posted by anthracitecl
hey guys.i have a question. i bought a set of volk wheels.(gunmetal gt7)
can i use my oem lug nuts? my car is 03 cl. or i have to buy rays lug?
if so what kind of rays lug do i have to buy? (i meant lug size )
thanks.
can i use my oem lug nuts? my car is 03 cl. or i have to buy rays lug?
if so what kind of rays lug do i have to buy? (i meant lug size )
thanks.
#519
OMGWTF4THGENTL
iTrader: (2)
Originally Posted by VT06TL
My GT-C's took special lug nuts so I had to get the Volk lug nuts but they came with the wheels. I bought the Volk locking lugs also. I would check with either Mackin or a dealer for sure. Personally I would not take a chance on good wheels like the GT7's but it's up to you.
#520
Originally Posted by Kennedy
Any "cone style" tuner lug will work. I have the Rays extended lugs, but I am currently using McGard splinedrive's with McGard tuner locks... You need 2 keys to get these bad boys off.