Finally started ordering parts for the swap**work starts pg 9**
#722
COTM Coordinator
I dont think its gonna be there, you are going to have to make some kind of bracket. When I had the master cylinder from the civic on there I had a bracket, but when I put the one for the cl I didnt. It works just fine with minimal movement. However, I did have to put washers between the clutch mount and the firewall, because when it was all the way tight it still had some play in it..... that could be your problem too.
Dont forget to check all the lines to make sure they are tight..... any looseness can ca=use air to get in there, or fluid to come out.
Dont forget to check all the lines to make sure they are tight..... any looseness can ca=use air to get in there, or fluid to come out.
#723
Senior Moderator
If you dont have the CL clutch pedal you will have to make a little bracket I used 2 pieces of angle iron put together to make a sideways U and adjusted them to fit in the opening to bolt the pedal to the upper bracket. You really need that bracket. Fabricate what ever you can to get the 2 to bolt up
#725
Senior Moderator
Originally Posted by KSuchdeve
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
![Turd](https://acurazine.com/forums/images/smilies/turd.gif)
![Banned](https://acurazine.com/forums/images/smilies/banned.gif)
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
#729
Originally Posted by fsttyms1
If you dont have the CL clutch pedal you will have to make a little bracket I used 2 pieces of angle iron put together to make a sideways U and adjusted them to fit in the opening to bolt the pedal to the upper bracket. You really need that bracket. Fabricate what ever you can to get the 2 to bolt up
#730
Well, I finally got a bracket made for the clutch pedal. I just picked up two L-brackets from Home Depot and screwed them together.
Here's the gap between the pedal and the car itself
![](http://i144.photobucket.com/albums/r196/KSuchdeve/f8e38f06.jpg)
Here's the bracket
![](http://i144.photobucket.com/albums/r196/KSuchdeve/100_1945.jpg)
And here's it installed
![](http://i144.photobucket.com/albums/r196/KSuchdeve/100_1947.jpg)
Finally back on the road again![Woot](https://acurazine.com/forums/images/smilies/woot.gif)
Here's the gap between the pedal and the car itself
![](http://i144.photobucket.com/albums/r196/KSuchdeve/f8e38f06.jpg)
Here's the bracket
![](http://i144.photobucket.com/albums/r196/KSuchdeve/100_1945.jpg)
And here's it installed
![](http://i144.photobucket.com/albums/r196/KSuchdeve/100_1947.jpg)
Finally back on the road again
![Woot](https://acurazine.com/forums/images/smilies/woot.gif)
#732
![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
When I pushed down on the pedal, the whole assembly moved and only allowed the pedal to pull on the master cylinder like halfway. I didn't even need to bleed the lines after I put the new bracket on. The air I thought was in my lines and not allowing the clutch to engage was just the master cylinder not traveling all the way.
#733
COTM Coordinator
hmmmmm...... maybe I should check mine...... although I already know that I have a bad slave cylinder...... just dont have the money to buy a new one.
Wanna donate?
Wanna donate?
#734
Senior Moderator
Yea you will want to add that bracket.
Good job kris.
Good job kris.
#735
Senior Moderator
Originally Posted by MurdaZ
ksuchdeve is banned?
![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
Originally Posted by KSuchdeve
I do have the CL pedal, but it doesn't line up. I see the two holes above the pedal but the pedal doesn't reach far enough to be able to work. I bought a few brackets at Home Depot and am going to see what I can do with them.
#736
COTM Coordinator
I have the cl pedal too and it doesnt line up right. I started with the s2000 pedal but when I saw it didnt line up right i went with the cls pedal..... still didnt line up right.
guess I should make a bracket lol...... oh wait I already have one.... just need to install it.
guess I should make a bracket lol...... oh wait I already have one.... just need to install it.
#737
Originally Posted by MurkyRiversTL
Wanna donate?
![Sorry](https://acurazine.com/forums/images/smilies/sorry.gif)
Originally Posted by fsttyms1
Good job kris.
![Blush](https://acurazine.com/forums/images/smilies/blush.gif)
Originally Posted by fsttyms1
Yep ![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
![Nod](https://acurazine.com/forums/images/smilies/nod.gif)
![Run](https://acurazine.com/forums/images/smilies/run.gif)
Originally Posted by fsttyms1
Humm weird? I would have thought it would have.
Originally Posted by MurkyRiversTL
guess I should make a bracket lol...... oh wait I already have one.... just need to install it.
![Woot](https://acurazine.com/forums/images/smilies/woot.gif)
#738
COTM Coordinator
Originally Posted by KSuchdeve
I had to buy my slave on credit ![Sorry](https://acurazine.com/forums/images/smilies/sorry.gif)
![Sorry](https://acurazine.com/forums/images/smilies/sorry.gif)
Originally Posted by KSuchdeve
I highly recommend that you do. It only cost me $3.76 at Home Depot ![Woot](https://acurazine.com/forums/images/smilies/woot.gif)
![Woot](https://acurazine.com/forums/images/smilies/woot.gif)
#739
I'm going to eventually get my new master cylinder on there as well. When I did the big order from the first few pages of this thread, I ordered a new CL-S clutch master cylinder but I am missing one little piece (the metal connector that attaches the master cylinder to the metal fluid line) so I couldn't use that one and had to get an old one from an old Integra at the junk yard. I'm sure it has at least 100K miles on it (the car not the part) so it is pretty worn out. All the dealerships I've talked to can't find the last part I need, they keep sending me the wrong part. I think there's something wrong with the parts database b/c every dealership has that little metal piece on back order; no one in the US can even get one right now.
#744
OM NOM NOM NOM
iTrader: (1)
Join Date: Apr 2007
Location: Permanently Back In San Jose!
Age: 37
Posts: 673
Likes: 0
Received 1 Like
on
1 Post
In northern california, every large city seems to have a junkyard. HAP located in sacramento about 20 minutes away from UC Davis (where i goto school) has like 3 acres worth of honda and acura parts. Back in san jose, theres a little block where theres a bunch of junk yards that specialize in certain types of cars. B2 Auto dismanters is where i found my CL-S 6mt. lemme know if you need to look for any parts, maybe i can help you find it here.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#745
Senior Moderator
I had to fabricate the bracket as well. I used a Civic pedal and master cyl
#746
COTM Coordinator
Made the bracket.... pedal feels better, but I definitely have a faulty part. Either th eslave or master cylinder..... Ill have to wait to see which it is..... but Im pretty sure its the slave.
#747
Senior Moderator
Id start out with the slave first as ive had them go bad on other hondas
#748
COTM Coordinator
Originally Posted by fsttyms1
Id start out with the slave first as ive had them go bad on other hondas
#749
Well here's a little video I made after watching Mike's. I've got a few more better ones on the way.
http://www.youtube.com/watch?v=h-lLYYt7WtE
http://www.youtube.com/watch?v=h-lLYYt7WtE
#750
Unofficial Goat
iTrader: (1)
Originally Posted by KSuchdeve
Well here's a little video I made after watching Mike's. I've got a few more better ones on the way.
http://www.youtube.com/watch?v=h-lLYYt7WtE
http://www.youtube.com/watch?v=h-lLYYt7WtE
#751
I am having some problems shipping my speed sensors down to Joe so he can finish making my harness (UPS FTL). Once I get those down to him he can finish and send my harness. I'll be getting the CL-S gauges soon too.
LOL yea I was having trouble trying to figure out how to mount the camera good. This was me holding it in my mouth by the piece that screws to the bottom to attach it to a tripod. Later, I attached it by the wrist strap to the passenger headrest post, but it was too low and you couldn't see the road that well. I finally put the camera on the tripod and strapped the tripod to the left part of the passenger seat.
LOL yea I was having trouble trying to figure out how to mount the camera good. This was me holding it in my mouth by the piece that screws to the bottom to attach it to a tripod. Later, I attached it by the wrist strap to the passenger headrest post, but it was too low and you couldn't see the road that well. I finally put the camera on the tripod and strapped the tripod to the left part of the passenger seat.
#753
COTM Coordinator
I think uyou meant to post this
http://www.youtube.com/watch?v=Q5O37E-M&feature=user
and are you hitting vtec now, or did it just sound like it.
http://www.youtube.com/watch?v=Q5O37E-M&feature=user
and are you hitting vtec now, or did it just sound like it.
#756
COTM Coordinator
huh... that sucks.... Well hopefully you get that shit taken care of soon, your missing out on the full potential.
To bad you live in Florida, we should have a 6spd swap meet..... like in kansas so its equal distance for everybody (Kansas is in the middle of the country right? lol)
To bad you live in Florida, we should have a 6spd swap meet..... like in kansas so its equal distance for everybody (Kansas is in the middle of the country right? lol)
#759
Yea the ECU is running in "limp mode" b/c it isn't getting signals from the automatic trans.
Here's some more vids that took forever to load last night...
http://www.youtube.com/watch?v=AiHnKQ6NeVM
http://www.youtube.com/watch?v=a4M2VFMX1D0 -- go to about 1:25
http://www.youtube.com/watch?v=TYWOmdaI_TE
Here's some more vids that took forever to load last night...
http://www.youtube.com/watch?v=AiHnKQ6NeVM
http://www.youtube.com/watch?v=a4M2VFMX1D0 -- go to about 1:25
http://www.youtube.com/watch?v=TYWOmdaI_TE
#760
Senior Moderator
Originally Posted by KSuchdeve
LOL yea I was having trouble trying to figure out how to mount the camera good. This was me holding it in my mouth by the piece that screws to the bottom to attach it to a tripod. Later, I attached it by the wrist strap to the passenger headrest post, but it was too low and you couldn't see the road that well. I finally put the camera on the tripod and strapped the tripod to the left part of the passenger seat.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
![](http://www.acurainspired.com/gallery/data/f90f2aca5c640289d0a29417bcb63a37/373_p15860.jpg)