The motor mount thread
^ Dude, StreetKA your always so negative. Have a little faith. I know it's been a long time...
I dropped by Excelerate's store recently and he said at some point we will have these mounts. It's really out of his hands, it's up to the fabricator. He knows that we're all chomping at the bit for these. He's going to sell a ton of em when they are ready and just right. The way things turned out with the failed innovative mounts really screwed everything up.
I dropped by Excelerate's store recently and he said at some point we will have these mounts. It's really out of his hands, it's up to the fabricator. He knows that we're all chomping at the bit for these. He's going to sell a ton of em when they are ready and just right. The way things turned out with the failed innovative mounts really screwed everything up.
Ive got to side with Street on this one.
Its not that I dont have faith in Josh, its the fabricator.
If the fabricator is dragging their feet for almost a year on getting a simple prototype working, how do we expect them to make something in bulk?
I understand Josh's predicament. He doesnt want to rush it to market and have the same issues Innovative had, but if I were in his shoes, I wouldve dumped this fabricator long ago and found someone that is capable of producing something.
Its not that I dont have faith in Josh, its the fabricator.
If the fabricator is dragging their feet for almost a year on getting a simple prototype working, how do we expect them to make something in bulk?
I understand Josh's predicament. He doesnt want to rush it to market and have the same issues Innovative had, but if I were in his shoes, I wouldve dumped this fabricator long ago and found someone that is capable of producing something.
Ive got to side with Street on this one.
Its not that I dont have faith in Josh, its the fabricator.
If the fabricator is dragging their feet for almost a year on getting a simple prototype working, how do we expect them to make something in bulk?
I understand Josh's predicament. He doesnt want to rush it to market and have the same issues Innovative had, but if I were in his shoes, I wouldve dumped this fabricator long ago and found someone that is capable of producing something.
Its not that I dont have faith in Josh, its the fabricator.
If the fabricator is dragging their feet for almost a year on getting a simple prototype working, how do we expect them to make something in bulk?
I understand Josh's predicament. He doesnt want to rush it to market and have the same issues Innovative had, but if I were in his shoes, I wouldve dumped this fabricator long ago and found someone that is capable of producing something.
Former Sponsor
iTrader: (1)
Joined: Mar 2004
Posts: 9,877
Likes: 624
From: www.ExceleratePerformance.com
After many months of ridiculous delays, I finally received a finished set to install. And we just installed them on a 03 CL-S 6 speed. He will be posting up within a day or two with his reviews.
From my standpoint, the mounts are ready to be manufactured. The mounts fit seamlessly. The vibration was minimal. Therefore, I have put these into full production and I should have them in hand in about 4-6 weeks.
Also, I've put a fair amount of money out to fabricate these due to the need I saw in this market. I know it's been delayed due to excuses by the fabricator but I haven't taken any money from anyone. So please, be reasonable. And I hope all of you who posted in this thread are ready to show your support.
Also, as a side note, our 3rd gen TL mounts have sold quite well and they have proved very durable thus far. I'm excited to extend that same reliability and durability to the 2nd gen mounts. I hope these will be the solution for all you 2nd gen CL/TLs who have experienced broken OEM mounts.
Just FYI the mounts will be selling for about $300 for the set: front, rear and side mount. I know everyone wants the transmission mount for the 6 speeds, right? If so, someone send me one and I'll see what I can do.
From my standpoint, the mounts are ready to be manufactured. The mounts fit seamlessly. The vibration was minimal. Therefore, I have put these into full production and I should have them in hand in about 4-6 weeks.
Also, I've put a fair amount of money out to fabricate these due to the need I saw in this market. I know it's been delayed due to excuses by the fabricator but I haven't taken any money from anyone. So please, be reasonable. And I hope all of you who posted in this thread are ready to show your support.
Also, as a side note, our 3rd gen TL mounts have sold quite well and they have proved very durable thus far. I'm excited to extend that same reliability and durability to the 2nd gen mounts. I hope these will be the solution for all you 2nd gen CL/TLs who have experienced broken OEM mounts.
Just FYI the mounts will be selling for about $300 for the set: front, rear and side mount. I know everyone wants the transmission mount for the 6 speeds, right? If so, someone send me one and I'll see what I can do.
I'm in as long as it wont take any longer than u claimed because my mounts are broken really bad i bought oem set already and poly to do them just waiting for better weather to install but if you are sure about it im gonna wait.
1. StreetKa
P.S.
There are two tranny mounts that are really small and if you cant do anything about them polly filling them should be fine.
1. StreetKa
P.S.
There are two tranny mounts that are really small and if you cant do anything about them polly filling them should be fine.
Last edited by StreetKA; Feb 12, 2011 at 05:53 PM.
I just replaced my front mount not too long ago and Ive got another rear mount to go in. But when these go again Ill probably be in for a set. Ill check if I still have the 6MT tranny mounts. I may have thrown them out.
One question though, whats the durometer on the bushings?
One question though, whats the durometer on the bushings?
why wait when u can get them direcetly from http://www.ingallseng.com/ & they work well am tryna put one together for the trany...
has anyone tryed it yet ? tranny mount
has anyone tryed it yet ? tranny mount
why wait when u can get them direcetly from http://www.ingallseng.com/ & they work well am tryna put one together for the trany...
has anyone tryed it yet ? tranny mount
has anyone tryed it yet ? tranny mount
FINALLY SOMETHING 
; and yeah stock mounts did not last too long with me 
(3-4 months)
also excelerate, would you be willing to do a deal if i also got the light weight crank pulley at the same time(be over $500
)
cause i hate my underdrive one
(bought it on the car fyi), not only is the A/C not as effective during the summer; but my lights also flicker/dim to the beat of my sub at night, only at idle still annoying though
but i would like to have the P/S still underdriven though
(if not actually more)
; and yeah stock mounts did not last too long with me (3-4 months)also excelerate, would you be willing to do a deal if i also got the light weight crank pulley at the same time(be over $500
)cause i hate my underdrive one
(bought it on the car fyi), not only is the A/C not as effective during the summer; but my lights also flicker/dim to the beat of my sub at night, only at idle still annoying thoughbut i would like to have the P/S still underdriven though
(if not actually more)
I'm in as long as it wont take any longer than u claimed because my mounts are broken really bad i bought oem set already and poly to do them just waiting for better weather to install but if you are sure about it im gonna wait.
1. StreetKa
P.S.
There are two tranny mounts that are really small and if you cant do anything about them polly filling them should be fine.
1. StreetKa
P.S.
There are two tranny mounts that are really small and if you cant do anything about them polly filling them should be fine.
the 3g TL has only one mount there, which is what he is probably thinking of (they have an additional mount where are batteries actually mount to the frame rail)
stop denying, you know you will eventually need a set, especially since you want to eventually get some cams and make more power
I need 2 more gears
Joined: Jun 2004
Posts: 3,228
Likes: 7
From: Springvale, Maine
After many months of ridiculous delays, I finally received a finished set to install. And we just installed them on a 03 CL-S 6 speed. He will be posting up within a day or two with his reviews.
From my standpoint, the mounts are ready to be manufactured. The mounts fit seamlessly. The vibration was minimal. Therefore, I have put these into full production and I should have them in hand in about 4-6 weeks.
Also, I've put a fair amount of money out to fabricate these due to the need I saw in this market. I know it's been delayed due to excuses by the fabricator but I haven't taken any money from anyone. So please, be reasonable. And I hope all of you who posted in this thread are ready to show your support.
Also, as a side note, our 3rd gen TL mounts have sold quite well and they have proved very durable thus far. I'm excited to extend that same reliability and durability to the 2nd gen mounts. I hope these will be the solution for all you 2nd gen CL/TLs who have experienced broken OEM mounts.
Just FYI the mounts will be selling for about $300 for the set: front, rear and side mount. I know everyone wants the transmission mount for the 6 speeds, right? If so, someone send me one and I'll see what I can do.
From my standpoint, the mounts are ready to be manufactured. The mounts fit seamlessly. The vibration was minimal. Therefore, I have put these into full production and I should have them in hand in about 4-6 weeks.
Also, I've put a fair amount of money out to fabricate these due to the need I saw in this market. I know it's been delayed due to excuses by the fabricator but I haven't taken any money from anyone. So please, be reasonable. And I hope all of you who posted in this thread are ready to show your support.
Also, as a side note, our 3rd gen TL mounts have sold quite well and they have proved very durable thus far. I'm excited to extend that same reliability and durability to the 2nd gen mounts. I hope these will be the solution for all you 2nd gen CL/TLs who have experienced broken OEM mounts.
Just FYI the mounts will be selling for about $300 for the set: front, rear and side mount. I know everyone wants the transmission mount for the 6 speeds, right? If so, someone send me one and I'll see what I can do.
This is very exciting. Do you have any pictures of the mounts you received and installed in the CL-S?
But also need grab more other stuff
Counted me in on this ...
1. StreetKa
2. friesm2000
3. rajca
4. Aznway
Former Sponsor
iTrader: (1)
Joined: Mar 2004
Posts: 9,877
Likes: 624
From: www.ExceleratePerformance.com
You will be able to choose from 62A or 75A.
Yes. Just PM me and I will get you a promo code for the pulley when we put the mounts up for sale.
Yes, posting in a few.
Yes, posting in a few.
