All Oregon Chat Thread
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
The landscaping services that were cleaning up the leaves in the buisness district i drive through to get to I-5 to go to work made it look like they took care of some of the the leaves but blew the rest into the street for the city to clean up.
I kid you not, in some of these piles they are 1.5ft high of leaves.
Chris, so many pictures in the flickr pool now. PDXzine flooded it.
Oh and 22!
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
you wanna meet up some time for them?
& camber kit fo show...unless u have a tire factory at ur disposal
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
If youre looking at the building from the street, on the left side is the employee doors. The isle infront of those doors is where youll see my car parked about 8 spaces down on the left. Just give me a call right before you leave, takes me a minute to get out of my clean room shhhtuff.
mmm lunch - going to paddys bar and grill..
pretty lame a girl whos worked here 5 yrs put in her two weeks to leave monday (shes not going to a competitor but a diff type of work) and yesterday they told her today could just be her last day at noon...
so were giving her a lunch party
why even ask for 2 weeks if u dont want it from ppl
pretty lame a girl whos worked here 5 yrs put in her two weeks to leave monday (shes not going to a competitor but a diff type of work) and yesterday they told her today could just be her last day at noon...
so were giving her a lunch party
why even ask for 2 weeks if u dont want it from ppl
Last edited by EuroR08; Nov 13, 2008 at 01:33 PM.
hey any of you boys know a good place to rent a tux??
my works xmas party in jan is themed some party from the 60's and the boy needs to get a tux lol
id ask for advice for a cheap dress place to get an evening gown too but im sure none of u have any. lol
my works xmas party in jan is themed some party from the 60's and the boy needs to get a tux lol
id ask for advice for a cheap dress place to get an evening gown too but im sure none of u have any. lol
Last edited by EuroR08; Nov 13, 2008 at 01:42 PM.
60's you could just do a suit and a bow tie. It'd be more comfortable....
Rachel - Let me know when and where you want to sell me your K-Sports. Next week works for me, especially nights cause the wee one is in bed.
Rachel - Let me know when and where you want to sell me your K-Sports. Next week works for me, especially nights cause the wee one is in bed.
Don't go to Men's Wearhouse as BCF wrote, especially the Tanasbourne one. The sales guys are jerks. :thumbsdow
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
Never will understand xmas parties in jan....
work fail
<<<pfff he doesnt need to be comfortable haha
its all about looking sexy
mmm lunch - going to paddys bar and grill..
pretty lame a girl whos worked here 5 yrs put in her two weeks to leave monday (shes not going to a competitor but a diff type of work) and yesterday they told her today could just be her last day at noon...
so were giving her a lunch party
why even ask for 2 weeks if u dont want it from ppl
pretty lame a girl whos worked here 5 yrs put in her two weeks to leave monday (shes not going to a competitor but a diff type of work) and yesterday they told her today could just be her last day at noon...
so were giving her a lunch party
why even ask for 2 weeks if u dont want it from ppl
paddys.. best lemon drop i ever tasted so far.
spent some good 3 hours dynamatting the trunk and rear seat area. also earned little more than a dozen of cuts on both hands for not being careful. those foils are razor sharp.
rear section of the cabin is really quiet now. dampened lotta road/exhaust noise. used smaller patches only where it needed it by knocking on the metal and hearing where it amplifies the most. think knocking/hearing took the most of time doing dynamat
paddys.. best lemon drop i ever tasted so far.
spent some good 3 hours dynamatting the trunk and rear seat area. also earned little more than a dozen of cuts on both hands for not being careful. those foils are razor sharp.
rear section of the cabin is really quiet now. dampened lotta road/exhaust noise. used smaller patches only where it needed it by knocking on the metal and hearing where it amplifies the most. think knocking/hearing took the most of time doing dynamat
spent some good 3 hours dynamatting the trunk and rear seat area. also earned little more than a dozen of cuts on both hands for not being careful. those foils are razor sharp.
rear section of the cabin is really quiet now. dampened lotta road/exhaust noise. used smaller patches only where it needed it by knocking on the metal and hearing where it amplifies the most. think knocking/hearing took the most of time doing dynamat


i really need to find a way to strip my car without --- well --- stripping my car...
Last edited by EuroR08; Nov 13, 2008 at 05:59 PM.
matting a car add anywhere from 50-100 lbs. If i remember correctly when i fully matted my rsx (double on doors/side panels)and foam insulated it (ensolite), the total shipping weight of everything was near 90lbs. Well worth it if you spent a ton on audio equipment and want the best out of it. Road noise level after matting was even quieter then tsx.
while i was dynamatting, i was like "hmmm... why should i be dynamatting the trunk when i don't even have any subs?"
"ah ha! it'll decrease the exhaust noise that gets amplified in the trunk!" 
currently i have 21lb braille battery, removed stock intake resonators (aem cai), removed spare tire and tools, ur pulley, cat deletes for weight reduction. plus trying to do weight reduction on myself for another 10lbs to compensate for the added weight (dynamat)
matting a car add anywhere from 50-100 lbs. If i remember correctly when i fully matted my rsx (double on doors/side panels)and foam insulated it (ensolite), the total shipping weight of everything was near 90lbs. Well worth it if you spent a ton on audio equipment and want the best out of it. Road noise level after matting was even quieter then tsx.
90lbs of dampening?
in few weeks, i'm gonna get Samsung Behold from T-mobile. it just came out on the 10th of this month. full touch screen like iphone with 3g capability and 5mgpixel camera. its only $150 with all the rebates to new customers at t-mobile stores. but i know this t-mobile authorized dealer and they'll do extra $50 rebate. let me know if you need one.
crazy i know. But its like a night and day difference in sound and road noise level. Mostly for comfort since i do a lot of freeway driving.
damn so $100 after rebates? hmmm what if im an existing customer? contract has been up for while, just waiting or a phone that i actually like and that looks great. Im going to go out and take hard look at it tomorrow.
in few weeks, i'm gonna get Samsung Behold from T-mobile. it just came out on the 10th of this month. full touch screen like iphone with 3g capability and 5mgpixel camera. its only $150 with all the rebates to new customers at t-mobile stores. but i know this t-mobile authorized dealer and they'll do extra $50 rebate. let me know if you need one.


yea. its only $100 after rebate. some t-mobile stores have working demos and its damn nice phone for 100. i heard t-mobile "dealers" dont get them in till the 20th but will have extra $50 rebate added on to it.
i'm existing customer too but its under mother's name. going to close mother's account and reopen in my name. it sux that t-mobile doesn't offer the same deal to existing customers. so i close the account and reopen every year or two to receive the full discount on new phones.
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
spent some good 3 hours dynamatting the trunk and rear seat area. also earned little more than a dozen of cuts on both hands for not being careful. those foils are razor sharp.
rear section of the cabin is really quiet now. dampened lotta road/exhaust noise. used smaller patches only where it needed it by knocking on the metal and hearing where it amplifies the most. think knocking/hearing took the most of time doing dynamat
rear section of the cabin is really quiet now. dampened lotta road/exhaust noise. used smaller patches only where it needed it by knocking on the metal and hearing where it amplifies the most. think knocking/hearing took the most of time doing dynamat




