Twin Cities Acuras
Anyone looking for a quad set up? I'm thinking of selling my old set. My housings are pretty beat up, but I can definitely swap my internals to your headlights for a cheap price on top of what I want for my headlights.
Jorge! I know your headlights are dying for a quad set up
Jorge! I know your headlights are dying for a quad set up
I like turtles
Anyone looking for a quad set up? I'm thinking of selling my old set. My housings are pretty beat up, but I can definitely swap my internals to your headlights for a cheap price on top of what I want for my headlights.
Jorge! I know your headlights are dying for a quad set up
Jorge! I know your headlights are dying for a quad set up
Chapter Leader (Midwest Region)
Land of 10,000 lakes
iTrader: (2)
They were take apart a few to many times so the clips that hold the lenses together are broke so he headlights don't hold a tight seal. Otherwise nothing is wrong with them. I love my new headlights and won't have a use for the old ones. I can always open my headlights and swap my parts into your headlights. Quick and simple.
Anyone looking for a quad set up? I'm thinking of selling my old set. My housings are pretty beat up, but I can definitely swap my internals to your headlights for a cheap price on top of what I want for my headlights.
Jorge! I know your headlights are dying for a quad set up
Jorge! I know your headlights are dying for a quad set up
I have an issue with my TL. When I'm cruising down the interstate it feels like I'm driving into a gusting head wind? It feels like the car is fighting. The RPM's stay a constant 2000 rpm at 70 mph.
It's hard to describe and I know dick about cars...just curious if anyone may know what is causing this?
It's hard to describe and I know dick about cars...just curious if anyone may know what is causing this?
Land of 10,000 lakes
iTrader: (2)
Yeah. I can either swap the internals on this light to your housings for free and you keep everything including the bad parts if my lights or send you my set and you ca swap them yourself.
Just replaced my driver's side door lock actuator Friday and I must say that the TL is one of the most easiest door panel removal and reinstall DIY I had ever done .
Yes they are I have taken them of a couple of times. What have you been up to this summer I have only seen your car once this year?
I haven't been to many car show or event this summer. Too busy being out and about. Other than that, I haven't been up to much just repairing and replacing parts as they slowly go out due to high mileage. What about you?
I have been to a few. I went to the 2013 Acurazine meet in KC That was fun. Plannin on going again next year.
Chapter Leader (Midwest Region)
You better :ghey: boy!!!
Just drive...
iTrader: (1)
Should we shoot for either the 7/27-28 weekend or the 8/3-4 weekend? Anyone want to volunteer there home for a BBQ spot, or should we just meet up somewhere else?
I like turtles
I would volunteer my house, but people complained last time it was brought it because I live "too far away"
Just drive...
iTrader: (1)
C'mon people...chime in! What do we want to do?
I live a simple life so you guys figure out a time and place and I'll be there. I turn 33 on the 28th but currently have no plans for the day so it would be fun to have it that day but like I said I'm flexible any day any time. For those in the Coon Rapids area the American Legion on the corner of Northdale Blvd and Crooked Lake Blvd has a very small car show, fewer people than RK Monday's, every other Tuesday 5pm-8pm and it is tonight if anyone was interested.
I live a simple life so you guys figure out a time and place and I'll be there. I turn 33 on the 28th but currently have no plans for the day so it would be fun to have it that day but like I said I'm flexible any day any time. For those in the Coon Rapids area the American Legion on the corner of Northdale Blvd and Crooked Lake Blvd has a very small car show, fewer people than RK Monday's, every other Tuesday 5pm-8pm and it is tonight if anyone was interested.
Last edited by Takata 18; 07-09-2013 at 11:23 PM.
I like turtles
I'm out in Rogers. As for weekend, it sounds like 7/27-7/28 is the preferred weekend... now to figure out where and what... also, some more "who's" would be nice so it's not just 3-4 people.
No every OTHER Tuesday so the next one isn't till 7/23 and even then I wouldn't recommend you drive all the way from WB for it. It is mostly classics and was a classic car only show but last time I went there was one or two newer cars so I am not 100% sure if there is an age limit. Like I said it is very small maybe 15-30 cars at most and it is mostly old people who just sit and visit with their friends for the show. I was recommending it mostly to Joe, Glow and Lusid if they are still around the CR area anyone else it really wouldn't be worth the cost of the gas to get there and see it.
Pineapple of DOOM!!!!
I can offer up my house for a BBQ, only thing is there is a bunch of construction. They are paving our street. My street is paved again but im not sure if they finished all the way around to the other end yet. I can check today when I go home.
Land of 10,000 lakes
iTrader: (2)
Only if everyone had a Monday or Tuesday open. Those are the two days I get off for work. Otherwise I have golf tournaments and weddings most every weekend.
Pineapple of DOOM!!!!
You suck! Although I might be willing to take a day off on a Monday or Tuesday sometime.
Good news! My whole street is paved... My house is open! If you want to grill at my place on the 27th
Last edited by Evil_Pineapple; 07-11-2013 at 06:23 PM.
Since WBA is awful at answering text messages ....I have to ask the group a question.
I need a new serpentine belt and my lower pulley is an aftermarket part. Standard OEM belt length is 40"...last time WBA replaced it, he used a shorter belt. Any of you fine gentlemen happen to know what the next size down would be for length? Is it only go by 1" increments?
I need a new serpentine belt and my lower pulley is an aftermarket part. Standard OEM belt length is 40"...last time WBA replaced it, he used a shorter belt. Any of you fine gentlemen happen to know what the next size down would be for length? Is it only go by 1" increments?
That sounds fine we should do it if this works for every one. Set up the time to be there. Hopefully i will have my car all put together.
Cruisin'
Good morning guys, finally i have found this thread of fellow T.C acura owners. I'm not new to Acura but some what new to the forums. I currently have a 2009 Acura TL, its sitting on Custom painted Vossen CV3's and what really sets it apart is the Mattle Blue Vinyl that I got done few months back! Would love to meet everyone and hopefully show up to a few meets!
Here's my Progression Thread
https://acurazine.com/forums/4g-tl-photograph-gallery-296/shujas-tl-progression-thread-879657/
Here's my Progression Thread
https://acurazine.com/forums/4g-tl-photograph-gallery-296/shujas-tl-progression-thread-879657/
Good morning guys, finally i have found this thread of fellow T.C acura owners. I'm not new to Acura but some what new to the forums. I currently have a 2009 Acura TL, its sitting on Custom painted Vossen CV3's and what really sets it apart is the Mattle Blue Vinyl that I got done few months back! Would love to meet everyone and hopefully show up to a few meets!
Here's my Progression Thread
https://acurazine.com/forums/showthread.php?t=879657
Here's my Progression Thread
https://acurazine.com/forums/showthread.php?t=879657
I'm back
I am down for 27 or 28. I might work on the 27th tho, if so, I will probably just show up later. If no one want to BBQ at a house, maybe we can go to a park?
I have an issue with my TL. When I'm cruising down the interstate it feels like I'm driving into a gusting head wind? It feels like the car is fighting. The RPM's stay a constant 2000 rpm at 70 mph.
It's hard to describe and I know dick about cars...just curious if anyone may know what is causing this?
It's hard to describe and I know dick about cars...just curious if anyone may know what is causing this?
Reset the ECU, problem solved
Since WBA is awful at answering text messages ....I have to ask the group a question.
I need a new serpentine belt and my lower pulley is an aftermarket part. Standard OEM belt length is 40"...last time WBA replaced it, he used a shorter belt. Any of you fine gentlemen happen to know what the next size down would be for length? Is it only go by 1" increments?
I need a new serpentine belt and my lower pulley is an aftermarket part. Standard OEM belt length is 40"...last time WBA replaced it, he used a shorter belt. Any of you fine gentlemen happen to know what the next size down would be for length? Is it only go by 1" increments?
http://www.autopartswarehouse.com/sk...DY5060825.html