Well, the TSX needed new wheels....ISF is back (Page 64)
#1601
Chapter Leader (Southern Region)
The following users liked this post:
CCColtsicehockey (01-18-2017)
#1602
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
#1603
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
I haven't pulled the cover off again yet to see if it is flush with the top or sticking out a little bit. It definitely is down in from the top lid for sure a good bit so thinking it is a flush break from below. Going to order myself a 1/4in tq wrench as well for the future along with everything else.
Just need to run to sears if I can't find one of those screw extractors you posted at Lowe's or Home Depot. Amazon really doesn't even seem to carry any.
Just need to run to sears if I can't find one of those screw extractors you posted at Lowe's or Home Depot. Amazon really doesn't even seem to carry any.
#1605
Senior Moderator
Iuno... I hear BBC's are bad for V's as well
#1606
Senior Moderator
(big black cars) ya pervs...
#1607
Chapter Leader (Southern Region)
big black cars in vaginas?
#1609
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
#1610
Senior Moderator
Orange is the new black after all..
#1612
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
Oh lord
#1613
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
So after some research I agree it looks like the SMC dual catch can is the best setup. Now the only issue is the fact they are listed as made to order and say they take 8-12 weeks. I don't have that as my build is being done either next week or the week after. So I guess it is back to figuring out which is the second best alternative.
#1614
Chapter Leader (Southern Region)
made to order.. wtf?? they must have something on the shelf.. it's an effing catch can..
#1615
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
I agree. I sent them an email just waiting to hear back. Hoping it is just something standard they have listed on the site and keep a couple in stock. But 8-12 weeks is what is says on their website.
If I can get one I plan to follow this install. It is really clean. Airaid + Saikou Michi Dual Catch Can Install Even with the easy open valves he installed on the cans I would love to find a way to install something where I don't even have to remove the top of the intake and the fitler to get to.
It sounds like a lot of these guys are emptying theirs every 1000 miles. If I need to do that I will be emptying it 20-25 times a year. I am hoping that I can empty it every 5-10k miles when I do oil changes. Right now I do oil changes every 10k with Mobile1 HighPerf High Mileage. With the new mods and higher boost I might stick with the same oil but switch to doing it every 5k miles.
If I can get one I plan to follow this install. It is really clean. Airaid + Saikou Michi Dual Catch Can Install Even with the easy open valves he installed on the cans I would love to find a way to install something where I don't even have to remove the top of the intake and the fitler to get to.
It sounds like a lot of these guys are emptying theirs every 1000 miles. If I need to do that I will be emptying it 20-25 times a year. I am hoping that I can empty it every 5-10k miles when I do oil changes. Right now I do oil changes every 10k with Mobile1 HighPerf High Mileage. With the new mods and higher boost I might stick with the same oil but switch to doing it every 5k miles.
#1616
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
Also anyone that has been doing their own reading on higher boost setups read anything bad about using a 50mm idler pulley?
#1617
Senior Moderator
iTrader: (5)
I agree. I sent them an email just waiting to hear back. Hoping it is just something standard they have listed on the site and keep a couple in stock. But 8-12 weeks is what is says on their website.
If I can get one I plan to follow this install. It is really clean. Airaid + Saikou Michi Dual Catch Can Install Even with the easy open valves he installed on the cans I would love to find a way to install something where I don't even have to remove the top of the intake and the fitler to get to.
It sounds like a lot of these guys are emptying theirs every 1000 miles. If I need to do that I will be emptying it 20-25 times a year. I am hoping that I can empty it every 5-10k miles when I do oil changes. Right now I do oil changes every 10k with Mobile1 HighPerf High Mileage. With the new mods and higher boost I might stick with the same oil but switch to doing it every 5k miles.
If I can get one I plan to follow this install. It is really clean. Airaid + Saikou Michi Dual Catch Can Install Even with the easy open valves he installed on the cans I would love to find a way to install something where I don't even have to remove the top of the intake and the fitler to get to.
It sounds like a lot of these guys are emptying theirs every 1000 miles. If I need to do that I will be emptying it 20-25 times a year. I am hoping that I can empty it every 5-10k miles when I do oil changes. Right now I do oil changes every 10k with Mobile1 HighPerf High Mileage. With the new mods and higher boost I might stick with the same oil but switch to doing it every 5k miles.
https://weaponxmotorsports.myshopify...ch-can-kit-wxm
otherwise, get the moroso you originally posted and add on one of these...
HTP Catch Can Drains Now Available
The following users liked this post:
CCColtsicehockey (01-19-2017)
#1618
Senior Moderator
iTrader: (5)
they make a relo bracket with the 70mm i think...
The following users liked this post:
CCColtsicehockey (01-19-2017)
#1619
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
I will be running a 2.5 upper and a 9.1 lower. Not sure what that will put me at for total. Not sure how to do the calculations. I assume somewhere there are formulas for that stuff?
#1620
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
if you can't wait for the SM, then i'd go Weapon X... they make a great dual setup as well that looks really stealth... it also comes with the drain so you never have to worry about accessing it from the top...
https://weaponxmotorsports.myshopify...ch-can-kit-wxm
otherwise, get the moroso you originally posted and add on one of these...
HTP Catch Can Drains Now Available
https://weaponxmotorsports.myshopify...ch-can-kit-wxm
otherwise, get the moroso you originally posted and add on one of these...
HTP Catch Can Drains Now Available
The following users liked this post:
Majofo (01-19-2017)
#1621
Chapter Leader (Southern Region)
that idler is rated to just over 10k rpm... so depending on the size of your upper/lower pulley, the ratio will probably spin if past its max rating... if that is the case you need to step it up to a 70mm idler... but you can get away with the 50mm and just swap out the bearings once they go... it's all going to depend how much more boost you plan on throwing at the car and what pulley size you plan on going with...
they make a relo bracket with the 70mm i think...
they make a relo bracket with the 70mm i think...
This is exactly how I'd do it.. what lower are you planning on using? Is it one of those billet lowers like Metco. I always wondered how they held up.
The following users liked this post:
CCColtsicehockey (01-19-2017)
#1622
Chapter Leader (Southern Region)
Price is good from Weapon X on the SMC dual catch can..
The following users liked this post:
CCColtsicehockey (01-19-2017)
#1623
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
I don't know when that will be though or if I will be even able to cause I can't afford to make the car uncontrollable to not be a DD in sun, rain, and snow.
#1626
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
Not only my bank account but also my head as I never planned to go this quick with mods. Not that I can't it just wasn't in the plans. Excited though and definitely hope it is a beast. Its killing me waiting to know if the parts will all come in time to have the work done next week or if I will have to wait till the week after. Hate that I am not able to do the work on my own either but didn't want to have to have it towed to get the tune afterwards. My previous statements of not being able to break the tires loose should no longer apply after all this too.
#1628
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
I'm not some ladiboi now
#1630
Chapter Leader (Southern Region)
J (RS) has a point, all this modding +power adders.. still haven't gotten that bitch sideways (into a unicorn).
I will say though, what you have planned is still very DD. I think you could DD 800 whp.
The following 2 users liked this post by Majofo:
CCColtsicehockey (01-19-2017),
rockstar143 (01-19-2017)
The following users liked this post:
CCColtsicehockey (01-19-2017)
#1632
Senior Moderator
Originally Posted by CCColtsicehockey
I'm not some ladiboi now
Or should I say. Heeeeeeeyyyy! :ghey:
#1633
Chapter Leader (Southern Region)
wait.. on E85 or pump?
#1634
Chapter Leader (Southern Region)
I can't find the link, but I think GM rated the 6L90e trans to 800 hp in a truck application. Shiett..
There are some guys putting down some epic digs with over 700 whp on it unmodified, so DD the shit out of it.
Anyways.. if fucking Larry Larson daily's his +2000, +3000 hp monsters, you guys are just being pussies
https://www.youtube.com/watch?v=lwF-kr91uxU
There are some guys putting down some epic digs with over 700 whp on it unmodified, so DD the shit out of it.
Anyways.. if fucking Larry Larson daily's his +2000, +3000 hp monsters, you guys are just being pussies
https://www.youtube.com/watch?v=lwF-kr91uxU
#1635
Chapter Leader (Southern Region)
Fucking embed is down again.. @IB Jason
#1636
Chapter Leader (Southern Region)
Larry Larson is such a bad ass.. I want a shirt with his mug on the front..
and pants with his balls on the front too.. as much as they can print on them anyways..
https://www.youtube.com/watch?v=yrHvNGxJOT0
and pants with his balls on the front too.. as much as they can print on them anyways..
https://www.youtube.com/watch?v=yrHvNGxJOT0
The following users liked this post:
Majofo (01-19-2017)
#1638
Chapter Leader (Southern Region)
Somebody buy @IB Jason a beer.. one of you guys, not me.. you guys being the owner of the store and such.
https://www.youtube.com/watch?v=UVSk4NvsFZE
https://www.youtube.com/watch?v=UVSk4NvsFZE
#1639
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
#1640
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts