teh CL.... lost his V card

Thread Tools
 
Search this Thread
 
Old May 16, 2019 | 09:11 AM
  #441  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
Didn't know you had em. Tempted to make them the next purchase & push the build back a little more. Coilovers transformed the car, could only imagine those sways..
Reply
Old May 16, 2019 | 09:33 AM
  #442  
CCColtsicehockey's Avatar
Moderator
Regional Coordinator (Southeast)
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2003
Posts: 44,132
Likes: 4,440
From: Mooresville, NC
They transformed the car and I am only on springs. I bet with coils they would be amazing. One of the problems is they don't make sets of them very often.





The rear one was easy to do cause I did it when I installed my exhaust. You do have to at least drop the mufflers down to do it if you are not doing exhaust at the same time from what I had read. The front one is a much bigger pain from what the shop told me. Had them install it when I had my front upper and lower control arm bushings installed. They said they had to drop the subframe a bit to get it in. Believe they just loosened the bolts enough to lower it about 1in though.
Reply
Old May 16, 2019 | 09:53 AM
  #443  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
Fuck, those look fantastic...

Read on FB a couple weeks ago that weaponX has 1 set available at the moment..
Reply
Old May 16, 2019 | 10:14 AM
  #444  
CCColtsicehockey's Avatar
Moderator
Regional Coordinator (Southeast)
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2003
Posts: 44,132
Likes: 4,440
From: Mooresville, NC
Welp there goes your wallet. Grab them quick and push off the power again
Reply
Old May 16, 2019 | 10:32 AM
  #445  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna




Reply
Old May 16, 2019 | 10:51 AM
  #446  
KaMLuNg's Avatar
Senior Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Feb 2002
Posts: 15,518
Likes: 1,096
how much for v lid? maybe can help fund suspension parts....
Reply
Old May 16, 2019 | 10:57 AM
  #447  
Majofo's Avatar
Chapter Leader (Southern Region)
 
Joined: Sep 2008
Posts: 88,888
Likes: 11,846
From: Waffles, BU
Shit.. fiddee bucks if you lucky
Reply
Old May 16, 2019 | 10:57 AM
  #448  
Majofo's Avatar
Chapter Leader (Southern Region)
 
Joined: Sep 2008
Posts: 88,888
Likes: 11,846
From: Waffles, BU
Reply
Old May 16, 2019 | 10:58 AM
  #449  
rockstar143's Avatar
Moderator
Chapter Leader (South Florida Region)
15 Year Member
Liked
Loved
Community Favorite
iTrader: (6)
 
Joined: Sep 2008
Posts: 78,249
Likes: 20,202
I don't have a horse in this race anymore.
Well, I don't have 556 horses in this race anymore.
Reply
Old May 16, 2019 | 11:19 AM
  #450  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
Originally Posted by KaMLuNg
how much for v lid? maybe can help fund suspension parts....
$1100 shipped..


Want the brick as well or just the lid?

Originally Posted by rockstar143
I don't have a horse in this race anymore.
Well, I don't have 556 horses in this race anymore.
Reply
Old May 16, 2019 | 11:20 AM
  #451  
KaMLuNg's Avatar
Senior Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Feb 2002
Posts: 15,518
Likes: 1,096
brick and lid... might do an LSA project on another car...

so thirty four fifty...

Last edited by KaMLuNg; May 16, 2019 at 11:23 AM.
Reply
Old May 16, 2019 | 11:48 AM
  #452  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
$400 shipped?

What's the project?
Reply
Old May 16, 2019 | 11:53 AM
  #453  
CCColtsicehockey's Avatar
Moderator
Regional Coordinator (Southeast)
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2003
Posts: 44,132
Likes: 4,440
From: Mooresville, NC
Originally Posted by KaMLuNg
brick and lid... might do an LSA project on another car...

so thirty four fifty...
If you could fit an LSA swap in your other project car
Reply
Old May 16, 2019 | 01:48 PM
  #454  
KaMLuNg's Avatar
Senior Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Feb 2002
Posts: 15,518
Likes: 1,096
no my project, my friends project...
Reply
Old May 16, 2019 | 02:02 PM
  #455  
SykVSyx's Avatar
Derek
 
Joined: Oct 2006
Posts: 560
Likes: 143
Originally Posted by teh CL
I can most def help out sourcing parts. You jumping ship?

Fenders are untouched, may have to massage the rears for the 285s but nothing too drastic.

There is a sway bar upgrade which only comes as a set with F/R bars for the low price of $1100 US... .. it's not a necessary upgrade but it transforms the car from what I've read. They're on the list.
I am just being VERY diligent on the info I can source in this thread and what I have read on other Forums.

Like to be informed.....just in case.

Like what I am seeing here though, I do keep a look out anytime I am in the Oakville/Burlington area, on the off chance I see the 'Black Mamba' blow by.
Reply
Old May 17, 2019 | 06:42 AM
  #456  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna


Hard to blow by anything on the QEW through the Oakville/Burlington stretch, traffic is a joke but I do take full advantage of any gap I can find..

Aside from gas mileage, these things are as bulletproof as it gets, especially considering the power they put down stock. There are horror stories of guys getting the dreaded low oil pressure symptom but that's more on modded examples than anything.
Reply
Old May 17, 2019 | 07:57 AM
  #457  
SykVSyx's Avatar
Derek
 
Joined: Oct 2006
Posts: 560
Likes: 143
I know, QEW traffic is bad at the best of times.

Early weekend mornings or late evenings are usually pretty good.....which is helpful for a blacked out rocket.

Wife already gave the okay for a purchase, I just have to get rid of the other project/parts.

I figure with that, I am good as gold to pull the trigger when the time is right!
Reply
Old May 17, 2019 | 02:27 PM
  #458  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
I'm on the QEW by 430am.......

Wife's down with it? Thats half the battle, let's do this...
Reply
Old May 17, 2019 | 02:42 PM
  #459  
Majofo's Avatar
Chapter Leader (Southern Region)
 
Joined: Sep 2008
Posts: 88,888
Likes: 11,846
From: Waffles, BU
Reply
Old May 20, 2019 | 08:18 AM
  #460  
KaMLuNg's Avatar
Senior Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Feb 2002
Posts: 15,518
Likes: 1,096
another V brother...
Reply
Old May 21, 2019 | 07:09 AM
  #461  
SykVSyx's Avatar
Derek
 
Joined: Oct 2006
Posts: 560
Likes: 143
Originally Posted by teh CL
I'm on the QEW by 430am.......

Wife's down with it? Thats half the battle, let's do this...
You're on there WAY before me! Must be fantastic to drive on that at that time of day with three lanes open for shenanigans!

I know, was pleasantly surprised she agreed to it.

Originally Posted by KaMLuNg
another V brother...
Hoping so, just have to find one that ticks all the boxes.

Last edited by SykVSyx; May 21, 2019 at 07:15 AM.
Reply
Old May 21, 2019 | 07:30 AM
  #462  
rockstar143's Avatar
Moderator
Chapter Leader (South Florida Region)
15 Year Member
Liked
Loved
Community Favorite
iTrader: (6)
 
Joined: Sep 2008
Posts: 78,249
Likes: 20,202
Reply
Old May 21, 2019 | 08:00 AM
  #463  
KaMLuNg's Avatar
Senior Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Feb 2002
Posts: 15,518
Likes: 1,096
Originally Posted by SykVSyx
Hoping so, just have to find one that ticks all the boxes.
there are a few good ones priced on the fb group... you might want to check it out...
Reply
Old May 21, 2019 | 09:42 AM
  #464  
CCColtsicehockey's Avatar
Moderator
Regional Coordinator (Southeast)
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2003
Posts: 44,132
Likes: 4,440
From: Mooresville, NC
Originally Posted by teh CL
Fuck, those look fantastic...

Read on FB a couple weeks ago that weaponX has 1 set available at the moment..
So there are zero available now right?
Reply
Old May 22, 2019 | 01:23 PM
  #465  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna


Haven't reached out yet to confirm. With my luck, it's still available...

Originally Posted by SykVSyx
Hoping so, just have to find one that ticks all the boxes.
What are you looking for? Sedan I'm assuming? Auto or 6MT? Recaro's? Low mileage?

Just say the word and I'll find it..
Reply
Old May 22, 2019 | 05:22 PM
  #466  
SykVSyx's Avatar
Derek
 
Joined: Oct 2006
Posts: 560
Likes: 143
Originally Posted by KaMLuNg
there are a few good ones priced on the fb group... you might want to check it out...
Good to know, thanks for the heads up.

Originally Posted by teh CL


What are you looking for? Sedan I'm assuming? Auto or 6MT? Recaro's? Low mileage?

Just say the word and I'll find it..
Don't mean to clutter up your thread with my nonsense. Will shoot you a pm.
Reply
Old May 23, 2019 | 09:08 AM
  #467  
lowered2000tl's Avatar
Instructor
 
Joined: Mar 2008
Posts: 189
Likes: 24
From: CT
Holy crap I totally forgot about this thread. I’ve been MIA for a while but I found a weaponx full carbon fiber hood for sale locally in my absence.

Reply
Old May 23, 2019 | 10:08 AM
  #468  
Majofo's Avatar
Chapter Leader (Southern Region)
 
Joined: Sep 2008
Posts: 88,888
Likes: 11,846
From: Waffles, BU
Tits
Reply
Old May 23, 2019 | 01:32 PM
  #469  
CCColtsicehockey's Avatar
Moderator
Regional Coordinator (Southeast)
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2003
Posts: 44,132
Likes: 4,440
From: Mooresville, NC
Originally Posted by teh CL


Haven't reached out yet to confirm. With my luck, it's still available...
You should reach out and make them no longer available
Reply
Old May 23, 2019 | 01:33 PM
  #470  
CCColtsicehockey's Avatar
Moderator
Regional Coordinator (Southeast)
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2003
Posts: 44,132
Likes: 4,440
From: Mooresville, NC
That hood is absolutely beautiful. I really want one but would paint everything but the center of it. Wish I could find one local and save on shipping for sure.
Reply
Old May 23, 2019 | 01:39 PM
  #471  
lowered2000tl's Avatar
Instructor
 
Joined: Mar 2008
Posts: 189
Likes: 24
From: CT
shipping directly from weaponx is cheap when they run their sales. theyre actually running one right now for memorial day weekend.
Reply
Old May 23, 2019 | 02:40 PM
  #472  
Majofo's Avatar
Chapter Leader (Southern Region)
 
Joined: Sep 2008
Posts: 88,888
Likes: 11,846
From: Waffles, BU
Originally Posted by CCColtsicehockey
That hood is absolutely beautiful. I really want one but would paint everything but the center of it. Wish I could find one local and save on shipping for sure.
Or you can just CF or vinyl wrap the OG center
CF hood isn't a big weight cut, so if it's just the look..
Reply
Old May 23, 2019 | 02:50 PM
  #473  
lowered2000tl's Avatar
Instructor
 
Joined: Mar 2008
Posts: 189
Likes: 24
From: CT
Originally Posted by Majofo
Or you can just CF or vinyl wrap the OG center
CF hood isn't a big weight cut, so if it's just the look..
the cowl in the middle of the hood is taller, makes it look much more aggressive
Reply
Old May 24, 2019 | 06:15 AM
  #474  
teh CL's Avatar
Thread Starter
Moderator
20 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Dec 2004
Posts: 14,217
Likes: 999
From: Kelowna
Originally Posted by lowered2000tl
Holy crap I totally forgot about this thread. I’ve been MIA for a while but I found a weaponx full carbon fiber hood for sale locally in my absence.
Looks sick man.

Thanks for the pic, it's on the list...

Originally Posted by CCColtsicehockey
You should reach out and make them no longer available
I actually reached out yesterday &.... they're gone. Definitely need to jump on the next available set.
Reply
Old May 24, 2019 | 06:45 AM
  #475  
rockstar143's Avatar
Moderator
Chapter Leader (South Florida Region)
15 Year Member
Liked
Loved
Community Favorite
iTrader: (6)
 
Joined: Sep 2008
Posts: 78,249
Likes: 20,202
I bought the last one but it didn't fit the S4 the way I expected it to.
I'm shipping it back to them today.
Reply
Old May 24, 2019 | 03:43 PM
  #476  
Majofo's Avatar
Chapter Leader (Southern Region)
 
Joined: Sep 2008
Posts: 88,888
Likes: 11,846
From: Waffles, BU
Originally Posted by lowered2000tl
the cowl in the middle of the hood is taller, makes it look much more aggressive
Reply
Old May 24, 2019 | 03:44 PM
  #477  
Majofo's Avatar
Chapter Leader (Southern Region)
 
Joined: Sep 2008
Posts: 88,888
Likes: 11,846
From: Waffles, BU
Reply
Old May 28, 2019 | 12:27 PM
  #478  
CCColtsicehockey's Avatar
Moderator
Regional Coordinator (Southeast)
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2003
Posts: 44,132
Likes: 4,440
From: Mooresville, NC
Originally Posted by lowered2000tl
the cowl in the middle of the hood is taller, makes it look much more aggressive
And at least on my TSX when I went to a vented hood I dropped intake temps 15 degrees while in motion and temps while sitting in traffic 5 degrees.
Reply
Old May 28, 2019 | 01:30 PM
  #479  
lowered2000tl's Avatar
Instructor
 
Joined: Mar 2008
Posts: 189
Likes: 24
From: CT
Originally Posted by CCColtsicehockey
And at least on my TSX when I went to a vented hood I dropped intake temps 15 degrees while in motion and temps while sitting in traffic 5 degrees.
it definitely runs cooler with the vents, you can see the heat coming out of the hood when youre sitting at a traffic light or in traffic
Reply
Old May 28, 2019 | 03:48 PM
  #480  
CCColtsicehockey's Avatar
Moderator
Regional Coordinator (Southeast)
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2003
Posts: 44,132
Likes: 4,440
From: Mooresville, NC
Originally Posted by teh CL


I actually reached out yesterday &.... they're gone. Definitely need to jump on the next available set.
Bummer
Reply



All times are GMT -5. The time now is 12:32 AM.