Are you serious hahahahahaha
I can't find it
Searching.......

 

Damn, she must have removed the entire post. There were 100+ comments

 

hahahahaha
I guess so
Went all the way to may27 posts..can't find it

That A-Spec gray TL looks great dude
Simple stock
I feel like putting the trunk lip back on, but naaa

 

Easy Austin.....let's not get too cocky.

 

There is a 3G TL Facebook?

 

Yes sir
https://www.facebook.com/groups/6555078628/

----

Ingalls done

Ross, you see that son of a bish


Bish welded itself in these
Other 3 are peace of a cake, but that one... oh my God

May the force, fire, and sharpness be with you
These...







I don't remember if I got an alignment or not. I would go back and ask how the f did you align the rear. Impossible

You have to cut that inner bolt of the TOE(long)
Do whatever you can to take it out haha but stay away from the gas tank









Thanks swoosh for listing the parts for me.
I used most of them, I think 2 bolts left out.
But you could reuse what you removed from other 3 sides....

Meko, from the looks of it you will need:

1 x 26 90110-SDA-A00 BOLT, FLANGE (12X102) 2 $2.55 $1.89
1 x 27 90173-S84-A00 BOLT, RR. ARM (UPPER) 4 $3.00 $2.22
2 x 29 90215-SB0-003 NUT, SELF-LOCK (12MM) (CLINCH)(SATO RASHI) 4 $1.10 $0.81

1 x 18 52387-SDA-A00 BOLT, RR. CONTROL ARM ADJUSTING 2 $7.97 $5.90
1 x 19 52388-SDA-A00 PLATE, CAM 2 $4.77 $3.53
1 x 30 90216-SE0-010 NUT, RR. ARM (LOWER) (10MM) 2 $5.73 $4.24
1 x 13 52364-SDA-A00 WASHER, CONTROL ARM 2 $5.43 $4.02

This is PER SIDE...

------------------


Ups










Anil, that protesting thing in Istanbul. It's because of taking down a small forest.
Actually green area.

It's at Taxim Square close to Bosphorus...government want to cut down all those trees and build a mall there...
But everyone is against it

As in improving the city Istanbul went beyond the level last couple year. Both Asia side and Europe side
Amazing...

Biggest Mall in Europe is in Istanbul
Cevahir AVM

but gotta stay away from green areas

 

So the G got wrecked??

 

What G?
FX?
Dunno who the owner is but totaled for sure

 

Oh, thought your parents had a G35.. must be thinking of someone else

 

Hehe that's Tyler, his dad has
Mine has FX

 

made a couple of DVD-a's today, can definitely tell that the bass is there especially on the hip-hop songs. I don't have an ear for music, so I couldn't really hear the small differences. But I can for sure say that there were some differences

Your DIY was very helpful and I was able to make the discs without any problems and it was free since I was able to just use the free trials.
I did however have a couple songs cut off in the middle after converting them to .wav, I am not sure why. I caught one of the songs because it was only 80mb instead of 700mb like the rest. I re-converted a few times and it'd cut off at the same spot. One of the songs that was cut off made it on to the disc

 

Dammit. The Ingalls install looks like it going to be a huge pain in the ass.

 

Wow, I hope this Ingalls are worth it.

 

I remember when i replaced ingalls rear camber kits on my TL. Mine was like that too. What a pain in the ass... Glad you made it!!

 

Never had that problem with converting. No idea
Glad it was helpful

Good luck bro
Forgot to post these

Look at the bolt haha




So far so good Steven, I don't even have alignment yet.
I didn't feel any difference, I mean "bad" at least
No vibration or anything

I did notice though, after driving for 1 week... inner sides of the rear tires did look like they were taking pretty much load haha

Thanks
Worst modding ever haha
Actually I had another bad moment while modding something but I forgot what was it...anyways this was the worst one haha

 

Wow...if you were able to adjust toe but not move the bolt out, the upper camber arm is a much better option, I think.

 

I just printed out your write up on how to make DVD-A so i can give it a try! thanks!

 

Yes, that's very helpful...
unfortunately, I no longer have 5 channel anyway.

 

That way tire would be sitting at outside right? Instead of moving it inside from the bottom. You would push it out from the top to align it?

am i right?



Still..try it, better quality
Don't convert the songs
Throw the song in there.. higher the rates and such as I mentioned up there
Burn it

 

You are...
I found that the 2 arm ones confused the place I was taking it too...and cheap bushings on the ebay brand I bought...opted for the upper arm one now and it's much better.

 

and cheap
Why you no tell me

Link link??

 

WOW Meko...seems like you had to get up close and intimate with the camber nuts

Glad you got them done though....am sure they will be worth it

 

it will save you a few sets of tires

 

I feel your pain. Those were a pain on my car as well.
Glad you got it done.

 

I hope so

Couldn't get alignment today as well

Thanks dude.
Don't make me remember them

 

Did you spray anything like PB Blaster a couple days prior to trying to take that nut off?

 

^^^ Meko is a champ at taking nuts out....he uses his mouth as a wrench at times

Not sure if he did but you should....I would spray PB Blaster 2-3 days before the install

 

Bish I just need a hammet, that's all hahah

I saw Tyler used that spray for his suspensions, I was going to but I forgot. Didn't have a problem, was so easy to remove the bolts and I live in Boston

For the ingalls, don't even try. I am saying bold got welded itself inside the arm.

Wish I took a picture of it
You know what metal inside the both ends of the arms, which bolt goes through.....bolt got stuck in there.

Left side one, we couldn't remove the bolt, I saw the bolt in there friggen like married to the arm son of a...

Got it? when you cut it from both sides, bolt in the middle (inside), stays there

--------------------

The picture up there isssssss.. the right side

Bolt + metal frame that bolt goes in to + plastic bushing

We broke the bushing but couldn't still take out the bolt, or separate the bolt from it's friggen spot

SOO, don't even try to spray anything there...won't work
Damn I ave to update that ingalls thread, wonder if anyone was able to remove the bolt


Just took this like 1 hour ago






Anil I think I did 2.5 sec
40-60
no alignment and hot engine bay after driving the car 20 miles
Will lower that bish you will see

 

cars looking good! I need to lower mine next!

 

Meh.. enjoy the A-Spec now
I remember that feeling but doesn't stay for long...after that drop it hehe
You need inspire fogs too

 

ya inspires would be sweet but Im not good at wiring and dont like it when cars have all hacked up wires... they do look amazing on the TL tho

 

I could teach you

 

Got an alignment today
1- rims really look much better, car sits much better on the road (vision vise)
2- Now that thing is planted
What a difference as in ride

Rear end was jumping here and there after ingalls...but not anymore.






Watch the video, my left rear tire felt like this..


I am like having a heart attack there, that he is going to scratch the front end...thank he didn't

 

 

A great alignment makes the car drive so friggin awesome...
Congrats again, man...you're on your way there.

 

^^^ Steve....i know what you upto LOL

Meko...did you install the moog endlinks?

 

Thanks J. !!!!
After driving without alignment for a week...now it feels sooo smooth haha
But again, just like always steering is pointed slightly to the left when car is going straight
but meh I am used to it since 7yrs

What is he upto again haha

Aw hell yeah, remember last summer..
20mm RSB
New bushings front and rear
Moog links front and rear

Just added Coils + new compliance bushings at front + ingalls

I guess I am done huh

I cared about the details way more than the look of this car
Finally done with details and heading to visual look of the car

Tranny is happy with Redline
I am happy with xlr8 engine mounts
Same with TB spacer and the intake + THAT bypass
That bypass is everything

I love the current stance + titties on the window
Love the headlights too with zkw-r and Osram CBI
Love the color combo we decided on her
Perfect with the leds everywhere. Just like I wanted pure white (thanks to that ebay guy I finally found)

and we did all of those in one year of being on AZ

 

well done bud !!!

am happy that you are happy

 

Meko car looks great. I like the vid about how the technician just drives your car from around the back of the shop and pulls in like it isn't lowered. I would've been freakin out as well.

 

Thanks bro...thanks for not getting bored of my questions about this car haha

haha there is like 5mm gap in the front A-Spec
but I was amazed with Stage II again, how great it sounds from outside
I thought I was recording

Thanks dude