how do i hack my 2007 tl type s navigation........and how can i get it to play dvd....im new at this stuff......so it be great if some to teace me step by step

 

You can't. Buy some DVD-audio discs & enjoy what Acura gave you.

 

Actually you can play DVD-Videos, after some modification. Check out this resourceful thread https://acurazine.com/forums/3g-tl-audio-bluetooth-electronics-navigation-94/3g-tl-audio-electronics-faq-605299/ (post #4, fourth question down to answer your question). And next time try searching before posting an off topic question.

 

Any luck yet??

 

since version 3.9 is out now...whos going to give it a try and hack it for us??? anyone??

 

Can you help me with my Nav problem? It looks like you are the guy to talk to about this. its not reading the disc all of the sudden. The screen says disc error see dealer. Any ideas? it seems like it trys to load but then shows the error message over and over agin. Plese help. Maxwell e-mail kaimaxwell@hotmail.com

 

these links will be good for one week from today so enjoy and hope this helps some people out...the bn2 files are pre-hacked with blue splash screen, no nag screen or OK button. might be easier to hack these (add your own image) than start from scratch if you're impatient.
http://senduit.com/143a14 <---dumpnavi

http://senduit.com/5b0497 <---HMIManager

http://senduit.com/abd6fd <---HMIManager-401A-350

http://senduit.com/3d103f <---BN2HH12C

http://senduit.com/76a273 <---BN2HHMLD

enjoy!

 

redsox04tl...I thank you again for providing me the hacked files a few months back, and I'm sure everyone will appreciate the links you've just posted!

 

What version is this for? What version disc. this looks like the files for a 3.5 disc.

 

i think i had the 3.30f version. i had to rename that bn2hh12c to that. it was originally bn2h401 or whatever it is. i just renamed it and it worked fine. the dumpnavi and hmi manager i just got a while back and knew they were hard to find so i added them in case people needed em for diff versions.

 

where is the hole for the paperclip that pushes the cd out manually? the cd in my unit is stuck, and i cant seem to locate the manual eject.

 

err.. i tried this out and after the reboot my navi no longer boots at all. i tried the 5 second diag screen but nothing shows up =(

do i need to remove the battery and restart the navi?

also, can someone put together a BIN for a 06 acura TL -> blue nav screen/ok button hack/trip computer?

it'd be greatly appreciated. i dont know how to work CeBIN =(

Bin used is BNHH401A

 

^the CD version is an orange disc, 3.5

 

is it possible to make the welcome screen stay on the screen longer so you can actually use it as a wallpaper when you don`t use the navi ? I tried to read all the threads related to this and couldn`t find an answer.

I have Acura '05 navi

 

the original file i got was the 401a and i just renamed it. so it might be the same. try diconnecting the batt to reboot the system and copy your files. dwn load the new ones. rename. burn. load. cross fingers.

 

Removing the nag screen for version 4.73 or 4.81
I have a 2009 Honda Accord with ("White") DVD version 4.73. I have spent hours searching and as far as I can tell, it hasn't be done yet, but has anyone been able to get rid of the nag screen for version 4.73 or 4.81 (white disc)? I hate having to press "OK" to get to see the map every time you start the car.

 

Does anyone know what processor type is used in the '07 nav unit? I have read that it is made by Alpine but have not seen any indication of what processor type that the code is compiled for. Have seen a post that Alpine has confused the issue by manipulating the code to look like it is for a different processor type.

 

files have expired. can someone reup? thanks in advance

 

Thanks gt1! I was able to use your file and make all the modifications at once. I updated the Back.bmp though to display my own startup screen. Now, I would like to get the warning text back to the original text and remove the AD initials. However, I am not versed in hex editors, etc. The instructions I've seen have been very hard for me to comprehend. Does anyone have simple instructions on how to do this, including links to any software that I will need to download and how to use it?

Thanks.

 

What you want to do is pretty advanced and requires you to hex edit some of the files in the BIN file, which requires extraction, etc, etc.
In short, no---there are no "simple" instructions for this.

 

Well, maybe "simple" isn't the right word. Perhaps I should have said "clear" instructions. For example, when I read "get a clean navi.exe file" would a more clear instruction be, "extract the navi.exe file from your loading .BIN file on the OEM navigation dvd? Is that what is meant?

I don't think the other hacks were "simple" either, they were just better explained. So, can someone better explain the instructions to remove the AD and put back the original warning text? Thanks.

 

Try looking here:
http://www.vistabug.com/bb/viewforum.php?id=2&p=1

 

I don't know if anyone really checks this thread much anymore, but I've been trying for a couple days to pull off the OK Nag removal, but I only have access to a PC at work. I'm all Mac at home. I've run into several problems and simply can't keep spending time screwing around with this at work. Does anyone have a modified BNHH401A.BIN file for 3.50 orange disc with the nag removed they could send me? Or better yet, a full disc that works? I could send you a self addressed stamped envelope to get it back to me. If you only have the file, I have a dropbox that you could upload it to. Please pm me if you can help. I really only care about the OK button. Not worried about the splash screen, trip computer, or a/c controls.

I'm in so-cal also if anyone has a disc.

Thanks!!

 

I think people do check this thread, but as far as I know the OK nag hasn't been successfully hacked for the newer cars. I have a Honda Fit 2009 with the turquoise disc and the last I heard, there's numerous anti-hack checks that one must work around to successfully remove the OK nag in the more recent versions of the navi software.

 

Well maybe someone can just help me with the problem I'm having. I got hacked bin files from gt1's link. I load everything and it seems to be going great, I load the new bin file, i see the new splash screen, get the disc read error and switch the disc.

Then the new splash screen appears, the AD branded loading screen comes up, but then the screen flashes and the nav automatically loads the old bin file back in, and undoes what i've done.

Has anyone had this problem? Please help!

 

i tried doing all of this but i guess im not that computer illiterate. i just dont want to f**k up my navi swap that i already completed. Is there any easier ways or walk-throughs on how to put the nav hack on a new disc?

 

also can this be done using a mac desktop?

 

All of the tools are PC-based---probably will not work on a mac, but then again, who knows anymore?

 

i can't find the angry dad files for 3.4 navis. can anyone help?

 

I bought the 2010 update v3.9 (Orange disk) for my TL. Has anyone hacked it before? I want to do the wallpaper hack and get rid of the nagging OK button..

 

i'm in the same boat, i need to hack my navi with orange disk 3.4 please can anyone repost all the files require for this mod. thank you

 

OK, this is 29 pages long... so I apologize sincerely if this has been asked and answered, however is there a hack to play DVD movies in my 07 TL Type-s?

 

This may be completely off topic, but how in the world do you UNHACK?! I have a 06 with Navi and the disc it came with was a 3.30F and the startup screen has the "H" for Honda and the clock does not change when you change it in the setup screens. I don't care about the trip computer, or the OK button, or anything. I just want it completely back to factory. I've done the CD Boot from a 3.50 disc from my friend's Acura... I just want it to be right.. Any help would be appreicated.

 

I do not see a answer on this, but anyone hack the 07 NAVI's yet where you can get away from the OK screen and put in the TRIP computer and stuff in there?

 

A few have asked if anyone has hacked the orange 3.9 Navi disk. I can't take any credit for the actual hacks but have been able to implement them using my 3.9 disk in my '06 TL.


Here's my advice:

1. Spend the time to read and understand this tread. All the tools and basic info are here. You just need to take the time to play with them (and throw away a few CDs)
2. Search this thread for "3.8". The final pieces for me were taking two files (Navi.exe and HMIManager.exe) from 3.8 hacks found in this thread and adding them to my modified 3.9 boot disk.

I have:

• My desired splash screen
• The nagging OK button removed
• The added utilities (trip computer and A/C controls). I don't really care about the A/C controls but love the trip computer.
• All using my 3.9 maps disk

It CAN be done!

 

^^Good job and great advice, Dave!
It is a lot of information to sift through, but the bottom line is the hack can be done to ALL Orange Navi disk systems. Everything you need is in this thread somewhere.

 

Just bought a TL and plan on reading through all of this tomorrow but the question I have is my TL is a 2006 so I'm sure the maps are outdated it looks like 3.9 is the newest maps disk correct? Can this disk be burned or updated for free? If not how much is it?

 

You will have to pony up abt $200 for v3.9 from Acura. That is the most current version to date.

 

Check Ebay.
Check black market forum here.

 

I found version 4.63 is this only for the 2007-2009?