I have installed a type-S spoiler on my 05 TL
#281
Kaa - Ching !!!
Join Date: Nov 2006
Location: Rhode Island.....Self-Proclaimed Chromed Cousin of Brettallica
Age: 58
Posts: 1,718
Likes: 0
Received 2 Likes
on
2 Posts
Yeah - not sure about doing that myself until I find out what is involved. BUT the spring is not expensive at all........... Might stop the trunk from whacking me in the head when I'm in there looking for something....LOL
#282
Originally Posted by Kennedy
catch the fact that he installed the type S springs too?
I'm still doing the wing springs for the added weight of the dynamat.
I'm still doing the wing springs for the added weight of the dynamat.
#283
Kaa - Ching !!!
Join Date: Nov 2006
Location: Rhode Island.....Self-Proclaimed Chromed Cousin of Brettallica
Age: 58
Posts: 1,718
Likes: 0
Received 2 Likes
on
2 Posts
revolt - is it hard to explain what is involved with this........?
Found the instructions
https://acurazine.com/forums/showpos...8&postcount=16
Found the instructions
https://acurazine.com/forums/showpos...8&postcount=16
#284
Originally Posted by SteveP66
revolt - is it hard to explain what is involved with this........?
Found the instructions
https://acurazine.com/forums/showpos...8&postcount=16
Found the instructions
https://acurazine.com/forums/showpos...8&postcount=16
#289
All the picture is in order and in a slide show ( 4 part show )...CLICK HERE
#291
Kaa - Ching !!!
Join Date: Nov 2006
Location: Rhode Island.....Self-Proclaimed Chromed Cousin of Brettallica
Age: 58
Posts: 1,718
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by Kennedy
Steve, I'll go halvsies on the tool with you. It's like $20.
#292
Garage Park / Ikon
bringing back the thread from the dead..
but did the price of it go up?? i went to the estore.honda.com and put in the 2007 acura TL "Parts" went to body, trunk lid.. and found part number 27 listed for $325.07
whats up with that? how are/did you guys get it for 100??
but did the price of it go up?? i went to the estore.honda.com and put in the 2007 acura TL "Parts" went to body, trunk lid.. and found part number 27 listed for $325.07
whats up with that? how are/did you guys get it for 100??
#293
OMGWTF4THGENTL
iTrader: (2)
Price went up in April... The end of an era. Gotta pay like the rest of us now.
Originally Posted by Mykizism
bringing back the thread from the dead..
but did the price of it go up?? i went to the estore.honda.com and put in the 2007 acura TL "Parts" went to body, trunk lid.. and found part number 27 listed for $325.07
whats up with that? how are/did you guys get it for 100??
but did the price of it go up?? i went to the estore.honda.com and put in the 2007 acura TL "Parts" went to body, trunk lid.. and found part number 27 listed for $325.07
whats up with that? how are/did you guys get it for 100??
#295
Originally Posted by Crook
I noticed some slight lifting on the ends of the spoiler where I could have used a little more 3m tape. Only about 1 or 2 millimeter gap but the spoiler isn't at risk of coming off.
I would now suggest using extra 3m tape along the entire edge of the spoiler at both ends.
To the people who already installed theirs following my posts, I apologize. I wish I would have found out about this earlier.
I would now suggest using extra 3m tape along the entire edge of the spoiler at both ends.
To the people who already installed theirs following my posts, I apologize. I wish I would have found out about this earlier.
I then decided to use two of the original mounting bolts that came with the spoiler. I put them back in place and aligned the spoiler on the trunk lid with my wax pencil marks. I tapped on the spoiler to mark the holes to be drilled with the bolts that put little dents on the lid. I drilled the holes with a Unibit, (super easy). Got rid of the burrs and then used touch up paint to paint the bare metal. After the paint dried, I dropped the spoiler in place. The old 3M tape held the middle of the spoiler down perfectly. The nuts were tightened on the two bolts I used and it looks like it's there to stay.
I didn't use any of the plastic clips that came with the spoiler so I didn't have to drill any additional holes in the trunk lid.
I now recommend this mounting method with at least two bolts instead of using only 3M tape.
Good luck on the re-mounts.
#297
OMGWTF4THGENTL
iTrader: (2)
Crook and others...
Part of the problem we're experienceing is the use of the 3M tape.
I suggest you review "revolts" pictures. He bought 2 more studs, modified the spoiler to accept them, drilled 2 more holes (4 total) then reinstalled the spoiler with almost no 3m tape (other than on the front edge where the little tabs of tape lived.
Much more snug mounting, no edge lifting, and a VERY secure install.
I have the parts, that's my Sunday project.
Part of the problem we're experienceing is the use of the 3M tape.
I suggest you review "revolts" pictures. He bought 2 more studs, modified the spoiler to accept them, drilled 2 more holes (4 total) then reinstalled the spoiler with almost no 3m tape (other than on the front edge where the little tabs of tape lived.
Much more snug mounting, no edge lifting, and a VERY secure install.
I have the parts, that's my Sunday project.
#298
Originally Posted by Kennedy
Crook and others...
Part of the problem we're experienceing is the use of the 3M tape.
I suggest you review "revolts" pictures. He bought 2 more studs, modified the spoiler to accept them, drilled 2 more holes (4 total) then reinstalled the spoiler with almost no 3m tape (other than on the front edge where the little tabs of tape lived.
Much more snug mounting, no edge lifting, and a VERY secure install.
I have the parts, that's my Sunday project.
Part of the problem we're experienceing is the use of the 3M tape.
I suggest you review "revolts" pictures. He bought 2 more studs, modified the spoiler to accept them, drilled 2 more holes (4 total) then reinstalled the spoiler with almost no 3m tape (other than on the front edge where the little tabs of tape lived.
Much more snug mounting, no edge lifting, and a VERY secure install.
I have the parts, that's my Sunday project.
I ended up using two bolts on the outside edges so there is no chance of it curling up. The middle of the spoiler won't buckle up either because of the distance that the holes were drilled apart. I kind of had to pull and try to stretch the spoiler to to get the bolts to go into the holes in the trunk lid and that tightened down the middle of the spoiler which still had plenty of 3M tape.
Revolt did a good job. I think he figured out the best way to mount it.
#299
Feenin on some 20's
iTrader: (2)
hmm, datmrman, how is your 3M double sided tape holding the spoiler? still no lift on the edges?? I just got mine a couple of days ago and i'm planning on installing it with the 3m duoble sided tape.. too risky drilling into the trunk.. i don't trust myself enough...
#300
Looking for new mods
Just bought a brand new type-s deck lid spoiler on ebay for $120. Look around, because most people search for the accesorie deck lid, they rarely run into these deals. Only problem is that I have a 07 CGP, Type doesnt come that color, so the dealer is chargin me 190 to repaint and install, which is not bad, but almost 300 dollars at the end. Type-s much smoother that accessorie lid. Still regreting not buy a type s
#301
Safety Car
Originally Posted by AcuraTLboi
hmm, datmrman, how is your 3M double sided tape holding the spoiler? still no lift on the edges?? I just got mine a couple of days ago and i'm planning on installing it with the 3m duoble sided tape.. too risky drilling into the trunk.. i don't trust myself enough...
AcuraTLboi, go with just tape and see how it works out for you. You can always use the bolt method if tape doesn't work. With tape, its reversible.
Good luck!
#302
Feenin on some 20's
iTrader: (2)
Originally Posted by datmrman
Mine has been holding up fine. It still looks like the day I first installed it. Then again, I live in San Diego so I don't encounter very harsh weather.
AcuraTLboi, go with just tape and see how it works out for you. You can always use the bolt method if tape doesn't work. With tape, its reversible.
Good luck!
AcuraTLboi, go with just tape and see how it works out for you. You can always use the bolt method if tape doesn't work. With tape, its reversible.
Good luck!
also. i live in the bay area.. bad weather? it's all good up here =)
#303
Safety Car
I practically followed Crook's pictures and added additional tape to minimize gaps between the trunk and the spoiler. Pay attention to the edges of the spoiler and try to figure out how to minimize gaps there.
Man, I just saw your thread in the Photo Gallery. We're gonna be twins pretty soon (almost).
Man, I just saw your thread in the Photo Gallery. We're gonna be twins pretty soon (almost).
#304
Feenin on some 20's
iTrader: (2)
Originally Posted by datmrman
I practically followed Crook's pictures and added additional tape to minimize gaps between the trunk and the spoiler. Pay attention to the edges of the spoiler and try to figure out how to minimize gaps there.
Man, I just saw your thread in the Photo Gallery. We're gonna be twins pretty soon (almost).
Man, I just saw your thread in the Photo Gallery. We're gonna be twins pretty soon (almost).
#306
Originally Posted by AcuraTLboi
just installed it today. will post pics up later.. maybe tomorrow with more lighting, thnx to Crooks..
What's the difference between type-s lip spoiler and the decklip spoiler ????
#307
Type-S wraps around the trunk whereas the regual spoiler does not. I did mine almost a year ago and it is holding up perfect.
I went to the local body shop and they used production grade adhesive to stick it on. No holes for me please, I don't want no leaks in the trunk. Cost $50 to get is stuck on for life.
I went to the local body shop and they used production grade adhesive to stick it on. No holes for me please, I don't want no leaks in the trunk. Cost $50 to get is stuck on for life.
#312
Revolt...access to your spoiler install in photobucket?
In the process as well...was set on the 2 bolt method...now I'm reading the 4 bolt method and could use your help...
Think the photobucket requires a password...thanks!
Ray
Think the photobucket requires a password...thanks!
Ray
#313
Originally Posted by kingray
In the process as well...was set on the 2 bolt method...now I'm reading the 4 bolt method and could use your help...
Think the photobucket requires a password...thanks!
Ray
Think the photobucket requires a password...thanks!
Ray
is back on...