RL Section Ramblings
For some reason I can't start a new thread but hoping this will be enough to get an answer.
Have any of you hard wired a Garmin or such navigation system into the RL? How did you do it? I'm assuming I can wire it into the CD changer (losing the ability to play CD's). I'd like to pick up a Garmin mostly for the Bluetooth and MP3 ability but having the GPS can't hurt either.
The 780 just dropped to $165 and is yelling at me to buy it.
Any input?
Have any of you hard wired a Garmin or such navigation system into the RL? How did you do it? I'm assuming I can wire it into the CD changer (losing the ability to play CD's). I'd like to pick up a Garmin mostly for the Bluetooth and MP3 ability but having the GPS can't hurt either.
The 780 just dropped to $165 and is yelling at me to buy it.
Any input?
After all this time of searching... I FINALLY scored me a suspension set up.
Front
- Koni Reds (2nd gen legend)
- Stock Springs
- Stock Tophats
- Front Forks (2nd gen legend)
Rear
- Koni Reds (2nd gen legend)
- H&R Lowering Springs (2nd gen legend) (1.5" drop)
- Stock Tophats
Front
- Koni Reds (2nd gen legend)
- Stock Springs
- Stock Tophats
- Front Forks (2nd gen legend)
Rear
- Koni Reds (2nd gen legend)
- H&R Lowering Springs (2nd gen legend) (1.5" drop)
- Stock Tophats
I'm not too sure why it's just springs. I bought it used off a Floridian who had it on his RL. I liked the way his car sat and hit him up just as he got a new custom coilover kit.
I'm going to wait until I get some new tires for the 09 Accord Coupe V6 wheels I bought, then I'll put it on all at once.
That should hold me over until I can save up some money to get the wheels I really want.
I'm going to wait until I get some new tires for the 09 Accord Coupe V6 wheels I bought, then I'll put it on all at once.
That should hold me over until I can save up some money to get the wheels I really want.
Not neccesarily.
Most HOnda suspensions have some sort of similarities. Dimensions are usually a problem. Thats not to say something like say adjustable UCA's from another car wont work though. Unfortunately theres alot of trial and error.
What are you looking for?
Most HOnda suspensions have some sort of similarities. Dimensions are usually a problem. Thats not to say something like say adjustable UCA's from another car wont work though. Unfortunately theres alot of trial and error.
What are you looking for?
Well I installed a single din headunit in the RL with an impedance adapter from PacAudio. Screws lined up perfectly for me.
Of course there is a nice classy-looking gap in between the trim and the faceplate, but it sounds great. iPod + MP3 CD capability combined with bluetooth and satellite radio!
I've made a few inquiries with various Japanese companies who claim to have kits that will fix this.
Of course there is a nice classy-looking gap in between the trim and the faceplate, but it sounds great. iPod + MP3 CD capability combined with bluetooth and satellite radio!
I've made a few inquiries with various Japanese companies who claim to have kits that will fix this.
Not sure if that LS kit was for a navi or non-navi model.
I'm just going to by some ABS plastic sheets and get aquainted with a dremel
Bought a Kenwood Excelon X994 (<---- Link), its in the mail and i'll have pictures once thats all done
I'm just going to by some ABS plastic sheets and get aquainted with a dremel

Bought a Kenwood Excelon X994 (<---- Link), its in the mail and i'll have pictures once thats all done
Last edited by Ken1997TL; May 16, 2010 at 01:47 PM.
Cleaned my wheels yesterday at my buddy's dealership -he had some serious wheel acid cleaner. Basically went from gunmetal rims to normal. I couldn't believe how dirty and stained they were, took about 1.5hrs just for wheels. Might get out there today and wax it.
before

after
before

after
I def agree.
Well I got out there, clayed the entire car, buffed it and waxed it. Finally the weather's been nice. Spent a total of 4-5 hours in the last 2 days but I think it's well worth it





I've been meaning to spend some time to clean it for months. I'm glad it's finally done. Now I need to do the interior and need to get some touch up paint.
Here it is with the Garmin. I ended up getting a vent mount, less visible to thieves. I will be taking everything apart soon again and will have the wires come out of the vent.
Well I got out there, clayed the entire car, buffed it and waxed it. Finally the weather's been nice. Spent a total of 4-5 hours in the last 2 days but I think it's well worth it





I've been meaning to spend some time to clean it for months. I'm glad it's finally done. Now I need to do the interior and need to get some touch up paint.
Here it is with the Garmin. I ended up getting a vent mount, less visible to thieves. I will be taking everything apart soon again and will have the wires come out of the vent.
Silver3.5, this you?
http://milwaukee.craigslist.org/pts/1803081469.html
http://milwaukee.craigslist.org/pts/1803081469.html
Silver3.5, this you?
http://milwaukee.craigslist.org/pts/1803081469.html
http://milwaukee.craigslist.org/pts/1803081469.html
i have an extra set of CL-S wheels w/ tires sitting around collecting dust. they come with tires but are pretty worn out. the wheels have scratches and curb rashes but spin straight. let me know if you're interested; i would like to get rid of them for cheap......
How much?
http://cgi.ebay.com/ebaymotors/ws/eB...%3AMEWAX%3AVRI
o sorry. here is the page where i found the jdm tv/navi stock unit for the rl.
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
You might want to download the service manual here:
http://pdftown.com/Honda-Acura-35RL-Manual.html
http://pdftown.com/Honda-Acura-35RL-Manual.html
thank you.







