AcuraZine Dallas/Ft.Worth Crew
#8881
Three Wheelin'
I dont know if 3gtl ones will fit but I do still have my sstock suspension...more welcome to the tophats if you can find out if it is the same part number. Worth a shot.
#8882
Almighty Porn Star
Question is. Do the front top hats have 5 mounting bollts?
The reason Im looking for the top hats are for my Koni's & drop springs. Not really wanting to tear down my stock ones for the hats.
The reason Im looking for the top hats are for my Koni's & drop springs. Not really wanting to tear down my stock ones for the hats.
#8883
Dallas Chapter Leader (Midwest Region)
#8887
Dallas Chapter Leader (Midwest Region)
We were doing once a month. Need to again maybe this coming weekend or the next. Typically its been bone daddy's. No.one set place. Meet up for lunch and to.hang
The following users liked this post:
camerartus (07-30-2013)
#8889
Dallas Chapter Leader (Midwest Region)
We have gone to that location a few times, or the one in grapevine. I live right next to the one in plano. Me and opboarding usually try and set one up. It doesnt matter where we go, it can be up for discussion, have a bbq, or whatever. Usually about 10 ppl show up. Its always on a sunday since (most) people are off work.
#8891
Almighty Porn Star
Sound like a good time. I like meeting new people that are into the same Hobbies as I am. But the 4th is a no go for me. Im heading to Mayhem Festival.
#8892
slobalt defender
Can't make it on the 4th, already attending 2 meets that day haha
#8894
01 Type-S, Sexy Silver
#8895
Dallas Chapter Leader (Midwest Region)
#8897
01 Type-S, Sexy Silver
Thanks MBP. Yes, just a bumper and paint. I don't know if the support behind is damaged. Does your guy just do paint or bodywork also? If there's anything damaged behind it, we'll have to work with the insurance company on writing a supplemental.
#8898
Almighty Porn Star
I was a lil disappointed with the meet. It was smaller than expected and I seen just as many clean cars in the parking lot as I did inside the fence area.
#8899
Dallas Chapter Leader (Midwest Region)
I work at a dealership and they do bodywork also. Now if you wanted a quick bumper painted he is pretty good on the price. Ive never had any bodywork done by him personally so i dont know what he would charge, depending on what it is. If he can make a little side money and paint the bumper he usually will.
#8900
Dallas Chapter Leader (Midwest Region)
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
#8903
01 Type-S, Sexy Silver
I work at a dealership and they do bodywork also. Now if you wanted a quick bumper painted he is pretty good on the price. Ive never had any bodywork done by him personally so i dont know what he would charge, depending on what it is. If he can make a little side money and paint the bumper he usually will.
Thanks,
Sam
#8904
Dallas Chapter Leader (Midwest Region)
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)
#8906
Advanced
I work at a dealership and they do bodywork also. Now if you wanted a quick bumper painted he is pretty good on the price. Ive never had any bodywork done by him personally so i dont know what he would charge, depending on what it is. If he can make a little side money and paint the bumper he usually will.
#8907
Dallas Chapter Leader (Midwest Region)
He doesnt do any rolling. I actually need to do mine... i rolled mine in the rear a bit but im hitting up front on turns cuz i lowered it alot more than i was. I would reccomend someone that uses a professional roller. I think there is a guy on craigslist around doing it that is good so im told. I dont trust people touching my car so im a bit weary of someone doing it. I think someone in houston bought a eastwood roller not too long ago... Maybe we should hit them up.
#8908
Almighty Porn Star
Fender Roller...Says he has been doing it 6 years.
http://dallas.craigslist.org/dal/pts/3921780580.html
Another one with less experience
http://dallas.craigslist.org/dal/pts/3916532952.html
http://dallas.craigslist.org/dal/pts/3921780580.html
Another one with less experience
http://dallas.craigslist.org/dal/pts/3916532952.html
#8909
Q('.')=O
iTrader: (1)
Another one with less experience
http://dallas.craigslist.org/dal/pts/3916532952.html
http://dallas.craigslist.org/dal/pts/3916532952.html
#8911
Advanced
He doesnt do any rolling. I actually need to do mine... i rolled mine in the rear a bit but im hitting up front on turns cuz i lowered it alot more than i was. I would reccomend someone that uses a professional roller. I think there is a guy on craigslist around doing it that is good so im told. I dont trust people touching my car so im a bit weary of someone doing it. I think someone in houston bought a eastwood roller not too long ago... Maybe we should hit them up.
http://dallas.craigslist.org/dal/pts/3921780580.html
#8913
Dallas Chapter Leader (Midwest Region)
Not sure, check second gen forum threads, they will know. Maybe type it into yahoo and acurazine and you might find something. If it was a 3g id be all over that!
#8914
Everyday I'm rofling
Eastwood fender rollers are $200 on ebay. Split it between the both of you and DIY. Then either one of you keeps it then rent it to other forum members for $50 or something to make your money back. Or resell it on ebay and get atleast $100 after shipping and use that to make some of your money back.
There is also a place I think it was in DFW that will rent them out to you. It was pretty cheap and came out to under $100 renting for a weekend. I cant remember the site though.
There is also a place I think it was in DFW that will rent them out to you. It was pretty cheap and came out to under $100 renting for a weekend. I cant remember the site though.
The following users liked this post:
NBP_BALLER (08-03-2013)
#8915
01 Type-S, Sexy Silver
He can meet you in Addison or Irving, $50 rental for 5 days. And you don't have to mess with shipping it back to him.
Even sweeter deal if you could find another person to split it with.
I wish I had known about this site so I could have done it myself. I took mine to Speedtek in Haltom City about 4 years ago, and I think they charged 50 or 60 bucks to do the rear 2 wheels. So if you're not comfortable doing it yourself, I don't know if they still offer this service, but they can do it.
#8917
Instructor
iTrader: (1)
Fender Roller...Says he has been doing it 6 years.
http://dallas.craigslist.org/dal/pts/3921780580.html
Another one with less experience
http://dallas.craigslist.org/dal/pts/3916532952.html
http://dallas.craigslist.org/dal/pts/3921780580.html
Another one with less experience
http://dallas.craigslist.org/dal/pts/3916532952.html
I used Tyler, he rolled my fenders real well. I have no complaints w/ his work, he even used a heat gun. He also drives a hella flush 350z that he rolled himself, so he knows his work.
#8918
Everyday I'm rofling
http://www.rollyourfender.com/rentalinfo.html
He can meet you in Addison or Irving, $50 rental for 5 days. And you don't have to mess with shipping it back to him.
Even sweeter deal if you could find another person to split it with.
I wish I had known about this site so I could have done it myself. I took mine to Speedtek in Haltom City about 4 years ago, and I think they charged 50 or 60 bucks to do the rear 2 wheels. So if you're not comfortable doing it yourself, I don't know if they still offer this service, but they can do it.
He can meet you in Addison or Irving, $50 rental for 5 days. And you don't have to mess with shipping it back to him.
Even sweeter deal if you could find another person to split it with.
I wish I had known about this site so I could have done it myself. I took mine to Speedtek in Haltom City about 4 years ago, and I think they charged 50 or 60 bucks to do the rear 2 wheels. So if you're not comfortable doing it yourself, I don't know if they still offer this service, but they can do it.
#8919
Three Wheelin'
THe only shop you will find that will roll and do a good job is kustomz or there were a couple. But I would recommend kustomz unlimited. I forgot how much they charge an axle though. I just borrowed friends eastwood and did it myself...took a while but I got it to work.
#8920
Dallas Chapter Leader (Midwest Region)