AcuraZine Dallas/Ft.Worth Crew
#7641
Q('.')=O
iTrader: (1)
If you order a key that is pre-milled it is much easier because most places can cut it and program it, although it won't be cheap.
If you order a key that isn't milled then it will be hard finding a place to mill it, most places just cut it. And milling it will just add more $$ to the process.
If you order a key that isn't milled then it will be hard finding a place to mill it, most places just cut it. And milling it will just add more $$ to the process.
The following users liked this post:
TLife (06-04-2012)
#7642
Thanks for the info. That is why it has been so tough. I just ordered from an acura dealer online and of course they aren't pre milled. Only route I found was just sending it to heel toe auto. I know it has been said numerous times but I felt like someone could pull this off. Guess I was too optimistic.
If you order a key that is pre-milled it is much easier because most places can cut it and program it, although it won't be cheap.
If you order a key that isn't milled then it will be hard finding a place to mill it, most places just cut it. And milling it will just add more $$ to the process.
If you order a key that isn't milled then it will be hard finding a place to mill it, most places just cut it. And milling it will just add more $$ to the process.
#7650
Senior Moderator
Regions Leader
Regions Leader
Thread Starter
I have the service manual but didnt really see anything about taking the grill out.
I did my own grill and it was pretty easy. The only part that was a bit hard is that little piece of trim at the bottom
I did my own grill and it was pretty easy. The only part that was a bit hard is that little piece of trim at the bottom
#7651
I just wanted to chime in and say hello to everyone. I purchased my first Acura today at Goodson Acura in Dallas. 2009 TL with Tech. Looking forward to getting to know everyone here.
I was also wondering if any of ya'll had recommendations for a good place to get tinted? I saw a couple pages back people talking about Tritek?
I was also wondering if any of ya'll had recommendations for a good place to get tinted? I saw a couple pages back people talking about Tritek?
#7652
Senior Moderator
Regions Leader
Regions Leader
Thread Starter
I just wanted to chime in and say hello to everyone. I purchased my first Acura today at Goodson Acura in Dallas. 2009 TL with Tech. Looking forward to getting to know everyone here.
I was also wondering if any of ya'll had recommendations for a good place to get tinted? I saw a couple pages back people talking about Tritek?
I was also wondering if any of ya'll had recommendations for a good place to get tinted? I saw a couple pages back people talking about Tritek?
Welcome aboard....I know I keep saying this but we will meet up soon.
We just have to plan and execute.
#7654
![](http://i45.photobucket.com/albums/f93/ljchu/582423_378821052167654_1501610351_n.jpg)
#7655
I'll try to make it one of those nights! Looks sick!
Who has the TL:
Driving down 66, White Type-s with I believe yellow fogs, turned on 66 and Rowlett
Also who has the black on black TL in Rowlett with Aspec kit ha.
Just thought I would see if there were an TL enthusiast in Rowlett/Garland
Who has the TL:
Driving down 66, White Type-s with I believe yellow fogs, turned on 66 and Rowlett
Also who has the black on black TL in Rowlett with Aspec kit ha.
Just thought I would see if there were an TL enthusiast in Rowlett/Garland
#7656
#7659
Everyday I'm rofling
Guys it got crazy nuts outside about 45 minutes ago. I moved my car to covered parking before it got bad but a few still hit me. I really hope they were small enough in the beginning that they didn't dent...
![](http://i1157.photobucket.com/albums/p590/opboarding/IMAG0602.jpg)
#7662
I hope yall are ok. I am now just getting my TSXs into the shop from the last hail storm (april 3rd).
Prelim on the 2011 is 3300
Prelim on the 2009 is 5800, which is the first one in the shop now and will not be out for atleast 4 weeks if they dont decide to total it.
Prelim on the 2011 is 3300
Prelim on the 2009 is 5800, which is the first one in the shop now and will not be out for atleast 4 weeks if they dont decide to total it.
#7664
Everyday I'm rofling
Oh wow. He has mine beat. Mine were laying on the ground for about 30 minutes before I went back outside and took the picture, I dont think they were nearly that big when they fell though.
#7670
Everyday I'm rofling
Last summer I got hail damage on every panel of my car after having it for only 2 months. Not a good feeling to have. Hopefully yours can be PDR'd.
#7671
Our cars made it through the night. The more severe storms have a tendency to go around Ray Hubbard.
#7673
Giant Blue Car
Luckily, my car didn't get pummeled by the hail. I've always cut back the hackberry limbs that hang over my car, because I loathe the tree sap that the leaves emanate at certain times of the year.
I haven't gotten around to chop them back yet, and I'm really glad I didn't!
I haven't gotten around to chop them back yet, and I'm really glad I didn't!
#7675
Chapter Leader (Southern Region)
Glad most of you made out unscathed. Sounds like it could be +1.5B in damages.
![Big Eek](https://acurazine.com/forums/images/smilies/bigeek.gif)
#7676
Burning Brakes
I'll try to make it one of those nights! Looks sick!
Who has the TL:
Driving down 66, White Type-s with I believe yellow fogs, turned on 66 and Rowlett
Also who has the black on black TL in Rowlett with Aspec kit ha.
Just thought I would see if there were an TL enthusiast in Rowlett/Garland
Who has the TL:
Driving down 66, White Type-s with I believe yellow fogs, turned on 66 and Rowlett
Also who has the black on black TL in Rowlett with Aspec kit ha.
Just thought I would see if there were an TL enthusiast in Rowlett/Garland
#7678
For those who don't know, TopSpeed Pro-1 is holding an open house/meet at their facilities this upcoming Sunday, 11-5.
4109 Billy Mitchell Dr., Addison, TX 75001
Should be a wide variety of cars, & possibly a Super Trofeo Stradale.
4109 Billy Mitchell Dr., Addison, TX 75001
Should be a wide variety of cars, & possibly a Super Trofeo Stradale.
![Drool](https://acurazine.com/forums/images/smilies/drool.gif)
#7679
Hey guys,
Just moved back to DFW from New Orleans last week. Unfortunately, one of my stock rims developed a crack and is not holding air very well now.
Wondering if anyone here in the metroplex has an extra 2004-2006 stock 17" wheel that I can buy.
Thanks and looking forward to meeting some of y'all at future meets.
Just moved back to DFW from New Orleans last week. Unfortunately, one of my stock rims developed a crack and is not holding air very well now.
Wondering if anyone here in the metroplex has an extra 2004-2006 stock 17" wheel that I can buy.
Thanks and looking forward to meeting some of y'all at future meets.