TLtotheS2k
01-18-2017, 07:39 PM
#601
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
Looks good lowered.
You need to cut half a coil off the front so that it will be even. You know all the cool kids cut springs so get on it. If you need the tools to cut it I have them.
You need to cut half a coil off the front so that it will be even. You know all the cool kids cut springs so get on it. If you need the tools to cut it I have them.
01-19-2017, 08:29 AM
#603
Moderator
Thread Starter
iTrader: (3)
Posting this on the new page 
It's absolutely filthy but I can't tease anymore
I've put about 60 miles on the setup and I'm extremely enjoying it. My only gripe is that the car has a bit of a reverse rake; I'm hoping that with more time and mileage, the front will come down a bit and match the rears. It might be due to more negative camber in the rear compared to the front (-1.3 front, -1.8 rear) and also that the rear tires are more worn than the fronts, but I can't say for sure. Everything was preloaded before final tightening, but I'll most likely do the front again after breaking in the shocks a bit more. I'm very much an aesthetic person so this is really bugging me
It's absolutely filthy but I can't tease anymore
I've put about 60 miles on the setup and I'm extremely enjoying it. My only gripe is that the car has a bit of a reverse rake; I'm hoping that with more time and mileage, the front will come down a bit and match the rears. It might be due to more negative camber in the rear compared to the front (-1.3 front, -1.8 rear) and also that the rear tires are more worn than the fronts, but I can't say for sure. Everything was preloaded before final tightening, but I'll most likely do the front again after breaking in the shocks a bit more. I'm very much an aesthetic person so this is really bugging me
The following users liked this post:
ttribe (01-22-2017)
01-19-2017, 08:30 AM
#604
Moderator
Thread Starter
iTrader: (3)
Plus I can lower the Konis to the second perch if needed.Thank you! Damping is set right in the middle considering my commute is 36 miles one-way. Yep, the fronts can go to the lower perch if needed. Both front and rear are currently on the top perch.
01-19-2017, 09:12 AM
#605
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
There are three perches right?
01-19-2017, 09:58 AM
#606
Moderator
Thread Starter
iTrader: (3)
Nope, just two.
The following users liked this post:
CCColtsicehockey (01-19-2017)
01-19-2017, 10:22 AM
#608
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
Then yeah I would lower the front to the second one. I don't think you are going to get that much settle out of the springs.
01-19-2017, 11:30 PM
#611
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,428
Received 1,484 Likes
on
1,048 Posts
Wow, that looks pretty!!
01-20-2017, 07:15 AM
#612
In the Mid-South meow
iTrader: (2)
Looks great! I didn't notice the rake but being completely OCD with things too it'd drive me nuts.
01-21-2017, 11:53 AM
#613
I drive a Subata.
iTrader: (1)
Super clean. I need a S2K in my life.
01-22-2017, 08:03 PM
#614
Moderator
Thread Starter
iTrader: (3)
No 
Thank you!
Thank you gentlemen!
It's more noticeable in person 
We'll see what happens!
Yes you do
Thank you!
Thank you gentlemen!
We'll see what happens!Yes you do
01-24-2017, 03:49 PM
#616
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
02-09-2017, 12:58 PM
#617
Moderator
Thread Starter
iTrader: (3)
Sorry for the low-res pictures in this post 
Good news! A few local S2k guys assisted in preloading my suspension bushings and the drop evened out. It's noticeably lower and rides even better! These Konis are effing amazing.
The previous owner had the headlights restored but the finish was starting to show its age. I met up with a local detailer and he worked nearly 2.5 hours removing the old coating, cleaning these up, and putting a new sealant on.
They look brand new!
Finally, these will be installed tomorrow
Another piece was ordered today and should be here Tuesday
Good news! A few local S2k guys assisted in preloading my suspension bushings and the drop evened out. It's noticeably lower and rides even better! These Konis are effing amazing.
The previous owner had the headlights restored but the finish was starting to show its age. I met up with a local detailer and he worked nearly 2.5 hours removing the old coating, cleaning these up, and putting a new sealant on.
They look brand new!
Finally, these will be installed tomorrow
Another piece was ordered today and should be here Tuesday
The following 7 users liked this post by CLtotheTL32:
00TL-P3.2 (02-13-2017),
CCColtsicehockey (02-09-2017),
kurtatx (02-09-2017),
SuperTrooper169 (02-09-2017),
teh CL (02-12-2017),
and 2 others liked this post.
02-09-2017, 01:30 PM
#618
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
With the suspension and those tires its going to be a whole new car hitting the twisites 
How much did it run you to do the headlights if you don't mind me asking? I need to have the lights on the V done at some point and Megan's TSX needs the lights done as they are completely hazed up.
Oh and the drop looks so perfect now that it is evened out.
How much did it run you to do the headlights if you don't mind me asking? I need to have the lights on the V done at some point and Megan's TSX needs the lights done as they are completely hazed up.
Oh and the drop looks so perfect now that it is evened out.
The following users liked this post:
CLtotheTL32 (02-09-2017)
02-09-2017, 01:34 PM
#619
Turd Polisher
iTrader: (1)
Looks amazing! I'm glad you're enjoying the suspension setup man .. Espelir / Koni FTMFW!
Enjoy the PSS too ... you gettin' all done up
The following users liked this post:
CLtotheTL32 (02-09-2017)
02-09-2017, 01:41 PM
#620
Moderator
Thread Starter
iTrader: (3)
With the suspension and those tires its going to be a whole new car hitting the twisites
How much did it run you to do the headlights if you don't mind me asking? I need to have the lights on the V done at some point and Megan's TSX needs the lights done as they are completely hazed up.
Oh and the drop looks so perfect now that it is evened out.
How much did it run you to do the headlights if you don't mind me asking? I need to have the lights on the V done at some point and Megan's TSX needs the lights done as they are completely hazed up.
Oh and the drop looks so perfect now that it is evened out.
Search "Nick's Auto Salon" on Facebook. He's super nice and does an amazing job. I had the headlights redone on the Elantra last summer and they still look new.
The following users liked this post:
TylerT (02-09-2017)
02-09-2017, 01:43 PM
#621
Senior Moderator
50 bucks ?!? That's stupid cheap!
02-09-2017, 01:45 PM
#622
Moderator
Thread Starter
iTrader: (3)
He's a local college student who does detailing on the side. I was skeptical at first but he's incredibly talented and thorough. I'm taking the Tacoma to him for a paint correction eventually.
02-09-2017, 01:46 PM
#623
In the Mid-South meow
iTrader: (2)
Hells to the yes on all the updates! 
The following 3 users liked this post by SuperTrooper169:
02-09-2017, 01:48 PM
#624
Moderator
Thread Starter
iTrader: (3)
02-09-2017, 01:59 PM
#625
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
02-09-2017, 02:07 PM
#626
Moderator
Thread Starter
iTrader: (3)
Optimum Opti-Lens. It's like $60 for a tiny syringe Optimum Opti-Lens Permanent Headlight Coating, headlight coatings protectants
Nick puts a lifetime guarantee on it, so if it were to fail, you just bring him the car and he'll do it again.
Optimum Opti-Lens Permanent Headlight Coating, headlight coatings protectantsNick puts a lifetime guarantee on it, so if it were to fail, you just bring him the car and he'll do it again.
02-09-2017, 02:12 PM
#627
Senior Moderator
Fuck, that's a great deal for opti-lens too!! Brb, gonna take off my headlights and fly them across the country
02-09-2017, 02:50 PM
#628
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts
Optimum Opti-Lens. It's like $60 for a tiny syringe Optimum Opti-Lens Permanent Headlight Coating, headlight coatings protectants
Nick puts a lifetime guarantee on it, so if it were to fail, you just bring him the car and he'll do it again.
Optimum Opti-Lens Permanent Headlight Coating, headlight coatings protectantsNick puts a lifetime guarantee on it, so if it were to fail, you just bring him the car and he'll do it again.
02-09-2017, 02:55 PM
#629
Moderator
Thread Starter
iTrader: (3)
The following users liked this post:
CLtotheTL32 (02-10-2017)
The following users liked this post:
CLtotheTL32 (02-10-2017)
02-10-2017, 11:34 AM
#632
Moderator
Thread Starter
iTrader: (3)
I'm trying to get on your level!
02-10-2017, 11:37 AM
#633
Moderator
Nicely done. It's really coming along.
The following users liked this post:
CLtotheTL32 (02-11-2017)
02-11-2017, 03:51 PM
#634
Moderator
Thread Starter
iTrader: (3)
Thank you Tim! Truly appreciated
I've never been one to rush into modding, I like to strategically plan things out, but I'm extremely excited for the recent (and upcoming) additions. I'm sticking to an OEM+ approach so there isn't too much more I want to do. I'm sure eventually I'll do aftermarket wheels, but I'm in no hurry
With the weather not cooperating yesterday morning, I ended up taking the Tacoma to work. Tires are now scheduled to be installed on Monday.
I've never been one to rush into modding, I like to strategically plan things out, but I'm extremely excited for the recent (and upcoming
) additions. I'm sticking to an OEM+ approach so there isn't too much more I want to do. I'm sure eventually I'll do aftermarket wheels, but I'm in no hurry With the weather not cooperating yesterday morning, I ended up taking the Tacoma to work. Tires are now scheduled to be installed on Monday.
02-11-2017, 05:40 PM
#635
iWhine S/C 6MT TL
iTrader: (1)
LOVE the upgrades buddy!!!! Now for that CF steering wheel.
The following users liked this post:
CLtotheTL32 (02-12-2017)
The following users liked this post:
CLtotheTL32 (02-12-2017)
02-12-2017, 07:55 AM
#637
Moderator
Thread Starter
iTrader: (3)
Thanks Gus! Hell yeah, that would be suhweeeeet I'm sure it'll happen eventually
Awwww yeah 
I'm sure it'll happen eventually
02-13-2017, 07:50 PM
#638
Moderator
Thread Starter
iTrader: (3)
New tires are on 
I've never had anything other than all-seasons, so naturally I think these are absolutely amazing
The pictures didn't turn out as well I was hoping
I've never had anything other than all-seasons, so naturally I think these are absolutely amazing The pictures didn't turn out as well I was hoping
The following 3 users liked this post by CLtotheTL32:
02-14-2017, 06:45 AM
#640
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,472
Received 3,657 Likes
on
2,491 Posts