General Car Talk Discussion Thread
#1601
Senior Moderator
Thread Starter
this happened yesterday.
http://autos.yahoo.com/blogs/motoram...135513754.html
http://autos.yahoo.com/blogs/motoram...135513754.html
World’s largest parade of Ferrari F40s marks its 25th anniversary: Motoramic Dash
<cite class="byline vcard">
By Justin Hyde | Motoramic – <abbr title="2012-07-23T13:55:13Z">6 hours ago</abbr></cite>
<cite class="byline vcard">
By Justin Hyde | Motoramic – <abbr title="2012-07-23T13:55:13Z">6 hours ago</abbr></cite>
The Ferrari F40 unveiled in 1987 was the first supercar to surpass 200 mph, and stood as the final hurrah of Enzo Ferrari before his death in 1988; it's fair to ask whether any of the technically superior followers from Ferrari and others have ever rekindled the allure the F40 created then. To mark it's 25th anniversary, the world's largest gathering of F40s was held Sunday at the Silverstone race course in England.
Organizers counted 60 F40s in the group, part of the annual Silverstone Classic held every year to celebrate and race old sports cars. It wasn't just that the twin-turbo V8 good for 471 hp could launch the F40 to 60 mph in less than four seconds. It was that the F40 was the first modern supercar to combine racing engineering with road manners, a formula followed since by Lamborghini and many others.
#1602
Whats up with RDX owners?
iTrader: (9)
Thats a lot of red.
#1603
Suzuka Master
lol srika you being serious!!?
Scuderia all day i'll take that over the 458 as i mentioned earlier, or almost any other car for that matter.
On another note, is K&N filter's really worth double the cost of OEM??
I was at autozone looking all they had was K&N, STP and FRAM. STP and FRAM sound too cheap and are probably worse than OEM. K&N wasnt in stock but still its expensive.
Is there a middle ground between OEM & K&N, otherwise i'll just get OEM then.
Scuderia all day i'll take that over the 458 as i mentioned earlier, or almost any other car for that matter.
On another note, is K&N filter's really worth double the cost of OEM??
I was at autozone looking all they had was K&N, STP and FRAM. STP and FRAM sound too cheap and are probably worse than OEM. K&N wasnt in stock but still its expensive.
Is there a middle ground between OEM & K&N, otherwise i'll just get OEM then.
#1604
Senior Moderator
Thread Starter
actually I was poking some cynical fun at the websites that do that. they ask some unnecessary and sometimes irrelevant / illogical question about some photo they post. and, it annoys me sometimes. they do it because they read somewhere that they should ask a question along with a photo to increase activity on their page.
The following users liked this post:
speedemon90 (07-23-2012)
#1605
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
It's a Saturn Vue
#1606
Suzuka Master
actually I was poking some cynical fun at the websites that do that. they ask some unnecessary and sometimes irrelevant / illogical question about some photo they post. and, it annoys me sometimes. they do it because they read somewhere that they should ask a question along with a photo to increase activity on their page.
#1607
Senior Moderator
Thread Starter
#1608
Senior Moderator
Thread Starter
I guess people were trying to answer the question...........
#1609
Suzuka Master
#1610
Suzuka Master
god damn i cant change the stupid cabin air filter cause i need pliers and wouldnt you know my dad keeps almost ever freakin tool we have in his car. Only found one screwdriver too, but its the only one i needed.
Also placed in an order for the LED map/dome/courtesy lights. This will officially be the first mod lol.
Also placed in an order for the LED map/dome/courtesy lights. This will officially be the first mod lol.
#1611
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
Only took 12 years
The following users liked this post:
civicdrivr (07-23-2012)
#1612
Suzuka Master
hey, i didnt have the car for the first 8 years lol
then i played with the idea of doing stuff to my car but honestly i didnt think it would last esp. with the transmission.
Somehow this cars surviving lol so what the heck gonna start doing stuff. Gonna start small with lighting so i dont waste money. Not interested in doing performance parts. Just fixing it up.
Cleaned up my headlights today with some wd-40 haha. The yellowish tint is gone. Still a slight haze, but its still prettty damn clear for just taking some common product.
Here's a pic comparing one headlight i did to the other i didnt
then i played with the idea of doing stuff to my car but honestly i didnt think it would last esp. with the transmission.
Somehow this cars surviving lol so what the heck gonna start doing stuff. Gonna start small with lighting so i dont waste money. Not interested in doing performance parts. Just fixing it up.
Cleaned up my headlights today with some wd-40 haha. The yellowish tint is gone. Still a slight haze, but its still prettty damn clear for just taking some common product.
Here's a pic comparing one headlight i did to the other i didnt
#1613
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
Excuses, excuses.
Ever consider getting one of those OTC headlight clearing kits? Might do a better job than WD-40.
What does the plate mean?
Ever consider getting one of those OTC headlight clearing kits? Might do a better job than WD-40.
What does the plate mean?
#1614
Moderator
iTrader: (3)
WD40? wtf
I have a Meguairs headlight cleaning thing and it works great.
I have a Meguairs headlight cleaning thing and it works great.
#1615
Suzuka Master
it worked for the most part haha
plates my last name haha... :dontstalkmenow:
gonna be taking out a significant loan soon, and until i get a job i wont be spending good money on the car haha. Need to do a brake fluid flush soon too, friend said he'd help me as he has the tools also.
Havent flushed power steering in a while, as i have the slightest leak and i think that if there's gunk in there its stopping the leak haha so i dont wanna flush it and have the gunk leave then i have a bigger leak
plates my last name haha... :dontstalkmenow:
gonna be taking out a significant loan soon, and until i get a job i wont be spending good money on the car haha. Need to do a brake fluid flush soon too, friend said he'd help me as he has the tools also.
Havent flushed power steering in a while, as i have the slightest leak and i think that if there's gunk in there its stopping the leak haha so i dont wanna flush it and have the gunk leave then i have a bigger leak
Last edited by speedemon90; 07-23-2012 at 08:38 PM.
#1617
Team Owner
iTrader: (4)
Hey speedemon, I have some blacked out headlamps I did that I've been meaning to put in the BM. Let me know if you're interested.
#1618
Team Owner
iTrader: (4)
A couple pictures of the wrangler frame.
#1619
Team Owner
iTrader: (4)
Got a 3g flood car in. Put an engine in it.
#1620
Senior Moderator
Thread Starter
<object width="853" height="480"><param name="movie" value="http://www.youtube.com/v/ALtFhV1gS50?version=3&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/ALtFhV1gS50?version=3&hl=en_US" type="application/x-shockwave-flash" width="853" height="480" allowscriptaccess="always" allowfullscreen="true"></embed></object>
#1621
Moderator
iTrader: (3)
1:43 is so small
1:18 ftw
1:18 ftw
#1623
Moderator
iTrader: (3)
Looks stupid IMO
#1624
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
I think it's just ineffective. The whole point of folding mirrors is so that it doesn't stick out. It would've been much more efficient for it to fold normally.
#1625
Whats up with RDX owners?
iTrader: (9)
I agree, if they folded them normally theyd probably stick out less.
#1626
Suzuka Master
changing my cabin air filter right now since i've been driving it for four years and i figure it needs to be changed. I assumed i wouldnt need a dremel cause you know, 185,000 miles my parents must have done this.
Well what do you know its never been changed. I dont have a dremel so i may have to make due with a saw.
edit: nvm i do have a dremel
Well what do you know its never been changed. I dont have a dremel so i may have to make due with a saw.
edit: nvm i do have a dremel
Last edited by speedemon90; 07-24-2012 at 07:02 PM.
#1627
Senior Moderator
Thread Starter
#1628
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
You're lucky it's such a cool desk, otherwise someone might bitch at the beyond crappy picture.
The following users liked this post:
srika (07-24-2012)
#1629
Whats up with RDX owners?
iTrader: (9)
changing my cabin air filter right now since i've been driving it for four years and i figure it needs to be changed. I assumed i wouldnt need a dremel cause you know, 185,000 miles my parents must have done this.
Well what do you know its never been changed. I dont have a dremel so i may have to make due with a saw.
edit: nvm i do have a dremel
Well what do you know its never been changed. I dont have a dremel so i may have to make due with a saw.
edit: nvm i do have a dremel
Why are you using a Dremel?
#1630
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
I wonder what a cabin air filter with 185k looks like
#1631
Whats up with RDX owners?
iTrader: (9)
#1632
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
Probably looks something like your avatar's "moistness"
#1633
Whats up with RDX owners?
iTrader: (9)
Mental image.....ewwww
#1634
Suzuka Master
you need a dremel the first time you change it
https://acurazine.com/forums/2g-tl-1999-2003-98/updated-diy-ac-cabin-filter-change-567712/
look at the diy real quick to see a pic
Here's what they looked like
so nasty haha, i felt like i was gonna get a disease by breathing the air around it.
On another sadder note, my dad told me to recheck my radiator fluid, and it was like nearly empty the reservoir barely had any there and the radiator as well, I'm surprised my car didnt overheat.
Filled it up with a hose. Gonna have to keep a closer eye on this. Also need to add more power steering fluid as that got to the min. mark also. I hate all these leaks
https://acurazine.com/forums/2g-tl-1999-2003-98/updated-diy-ac-cabin-filter-change-567712/
look at the diy real quick to see a pic
Here's what they looked like
so nasty haha, i felt like i was gonna get a disease by breathing the air around it.
On another sadder note, my dad told me to recheck my radiator fluid, and it was like nearly empty the reservoir barely had any there and the radiator as well, I'm surprised my car didnt overheat.
Filled it up with a hose. Gonna have to keep a closer eye on this. Also need to add more power steering fluid as that got to the min. mark also. I hate all these leaks
#1635
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,431
Received 1,485 Likes
on
1,049 Posts
Maybe your car's going through menopause. That would explain it drying up.
On a serious note, I know my Accord took a 50/50 mix of coolant and water. Might be the same for your car.
On a serious note, I know my Accord took a 50/50 mix of coolant and water. Might be the same for your car.
The following users liked this post:
civicdrivr (07-25-2012)
#1636
Suzuka Master
yea it does require 50/50 mixture. Didnt have any at home, i'll probably get some from the dealership when i go to get my engine air filter. For the time being water will suffice.
#1637
I like Wix filters.
Screw going to the dealership unless you have to, if you can look for a smaller parts store... and when looking for a cabin filter, any will do, but a charcoal embedded one will be better at reducing odors.
I haven't stepped foot in an Autozone or Pep Boys in years and I don't plan to for... well, ever.
Screw going to the dealership unless you have to, if you can look for a smaller parts store... and when looking for a cabin filter, any will do, but a charcoal embedded one will be better at reducing odors.
I haven't stepped foot in an Autozone or Pep Boys in years and I don't plan to for... well, ever.
#1638
Suzuka Master
is autozone that bad??
#1639
Whats up with RDX owners?
iTrader: (9)
I used snips to cut the tabs holding the cabin air filter cover. I didnt want to get plastic shit all over my car. The plastic is soft and not very thick anyway.
#1640
Suzuka Master
With most tools in my dads car i'm limited with whats in the garage. I had a saw or dremel lol. I put a plastic bag under although i'm pretty sure it didnt do much. Dont matter, its so small anyway it'll just vacuum right up