Supercharged members chime in
The following users liked this post:
Marcelechka (09-05-2014)
#489
KingKong_Dav
Thread Starter
I'm running 3.5 lbs of boost.
With the high boost pulley I made an extra 25 hp and with the tune it added another 13 hp. My car still had the stock jpipe and third cat on. Another 20+hp could be seen with a atlp part like the 3inch v2r
List of mods
3.5 type. S engine
Atlp quad catback exhaust
Ct engineering supercharger w 2.95 hbp
Rdx injectors
Rv6 pcd
Hondata flash pro w/ tune
Cold air intake
The power is fucking good. It's soo fast
With the high boost pulley I made an extra 25 hp and with the tune it added another 13 hp. My car still had the stock jpipe and third cat on. Another 20+hp could be seen with a atlp part like the 3inch v2r
List of mods
3.5 type. S engine
Atlp quad catback exhaust
Ct engineering supercharger w 2.95 hbp
Rdx injectors
Rv6 pcd
Hondata flash pro w/ tune
Cold air intake
The power is fucking good. It's soo fast
#490
Burning Brakes
iTrader: (1)
Is 3.5lb of boost what the Comptech is supposed to be? For some reason I thought it was 6psi and the HBP was to make it 9. So you are only hitting 3.5lbs of boost with the HBP?
If 350whp was realistic with stock exhaust (PCD and J Pipe ok) I'd consider it, but damn i hate the way the screws sound, and it makes exhaust so much louder.
If 350whp was realistic with stock exhaust (PCD and J Pipe ok) I'd consider it, but damn i hate the way the screws sound, and it makes exhaust so much louder.
#496
KingKong_Dav
Thread Starter
Jpipe and mid pipes. But what's interesting about the dyno test it will perform against all j pipes on the market. It's going to be another j pipe shoot out.
#497
#498
Safety Car
iTrader: (8)
Is 3.5lb of boost what the Comptech is supposed to be? For some reason I thought it was 6psi and the HBP was to make it 9. So you are only hitting 3.5lbs of boost with the HBP?
If 350whp was realistic with stock exhaust (PCD and J Pipe ok) I'd consider it, but damn i hate the way the screws sound, and it makes exhaust so much louder.
If 350whp was realistic with stock exhaust (PCD and J Pipe ok) I'd consider it, but damn i hate the way the screws sound, and it makes exhaust so much louder.
I am under the same impression. It states 4-5 psi on their pulley and I thought HBP were about 8-10 psi so how in the world is OP getting 1.5 or 1.9 psi at first and then with HBP is only 3.5 psi? Am I missing something here
![Scratch](https://acurazine.com/forums/images/smilies/scratch.gif)
Last edited by EvilVirus; 09-06-2014 at 12:53 AM.
#500
Racer
iTrader: (3)
Those boost numbers are for 3.2 motors. I thought I read that the extra displacement is the reason boost numbers are lower. But that was months ago when I was looking into doing this.
Dav, snap some pics of midpipes if possible! My last update said I wouldn't get mine for another 3-4 weeks.
Dav, snap some pics of midpipes if possible! My last update said I wouldn't get mine for another 3-4 weeks.
#501
Burning Brakes
iTrader: (1)
Those boost numbers are for 3.2 motors. I thought I read that the extra displacement is the reason boost numbers are lower. But that was months ago when I was looking into doing this.
Dav, snap some pics of midpipes if possible! My last update said I wouldn't get mine for another 3-4 weeks.
Dav, snap some pics of midpipes if possible! My last update said I wouldn't get mine for another 3-4 weeks.
I'm not too knowledgeable on positive displacement blowers (is this even classified as such since it is a roots, but does not sit post throttle body?). I think that is the thing that made me dislike the CT so much. It's like a goofy implementation of a good idea.
The following users liked this post:
Marcelechka (09-07-2014)
The following users liked this post:
thisaznboi88 (09-06-2014)
The following users liked this post:
sockr1 (09-06-2014)
#512
KingKong_Dav
Thread Starter
Marcus is a good guy. He is very dedicated to the acura community and his customers. It was a pleasure to see him work and play for 5 hours. This guy is super quick with his installs and very educated with cars. I had a great time hanging out with him.
The following 3 users liked this post by kingkong_dav:
#519
Wow thanks for all of your hard work and sharing this with us, can't wait to see the results