2012 Bellanova White P. Tsx Tech Build Thread
#162
Pro
Thread Starter
Initially $179.99 Non Painted.
Now $79-$100 Painted
Trunk $125-$130 Painted
Im going to slowwwww down wl the modding, If i do springs, Im going to need spacers to follow up, Spacers are $250. Thats both spoilers..
Idk guys what do yall think?
Springs, Then Spoilers? Or Springs, then spacers?
Now $79-$100 Painted
Trunk $125-$130 Painted
Im going to slowwwww down wl the modding, If i do springs, Im going to need spacers to follow up, Spacers are $250. Thats both spoilers..
Idk guys what do yall think?
Springs, Then Spoilers? Or Springs, then spacers?
#163
ROTAREDOM
let me know what size spacers on stockies look best. Ill be doing it somewhere down the road
#167
Pro
Thread Starter
Along with the Drop, Too Low, and Low offset will cause rubbing.
Been thinkin the Same Thing. The stock wheels may look too sunken with out em
#168
Pro
Thread Starter
Stock Wheels 17x7.5 +55
08-10 Accord Coupe 18x8 +55
ASpecs 18x8 +45
I need a set of spacers that I can run with all 3 of these sets.
Being dropped on S techs Does Anyone Know the lowest offset before rubbing?
I will use the Search feature when I'm home I hate using my phone. What's up with a AZine IPhone App ?
08-10 Accord Coupe 18x8 +55
ASpecs 18x8 +45
I need a set of spacers that I can run with all 3 of these sets.
Being dropped on S techs Does Anyone Know the lowest offset before rubbing?
I will use the Search feature when I'm home I hate using my phone. What's up with a AZine IPhone App ?
#170
Pro
Thread Starter
#171
ROTAREDOM
so it looks like from 10mm in the front and 15mm in the back will sit me flush riding on stock wheels? I'll be sure to remember this
#172
Pro
Thread Starter
But after dropping i will decide how urgent the spacers are.
I May order the roof wing and spacers together. Ill give the Springs
2 weeks to settle and go for an alignment and get the spacers mounted.
Any one running a 15 up front 20 rear?
#173
Pro
Thread Starter
For those considering spacers. According to the thread its 15mm up front and back.
The front looks good, the back still looks a little sunken in. I think 15 up fornt 20mm rear.
Could i run a 8" wide rim with a +25 offset?
18x8 +45 Aspecs would be +25 after the 20mm spacer correct?
Im still learing the whole Negative degree camber, offet, width tire size etc.
Theres a lot to understand when it comes to Stance.
The front looks good, the back still looks a little sunken in. I think 15 up fornt 20mm rear.
Could i run a 8" wide rim with a +25 offset?
18x8 +45 Aspecs would be +25 after the 20mm spacer correct?
Im still learing the whole Negative degree camber, offet, width tire size etc.
Theres a lot to understand when it comes to Stance.
#174
Pro
Thread Starter
Blowing up my own thread. But heres 15mm front 20mm rear.
A for sure purchase at the end of the week. Sits so flush.
https://acurazine.com/forums/2g-tsx-tires-wheels-suspension-300/just-ordered-some-20mm-15mm-ichiba-v2-wheel-spacers-781855/
Now does any wheel expert know if ill have trouble with the S Techs?
They look amazing for stock height. I dont want the drop to cause rubbing
A for sure purchase at the end of the week. Sits so flush.
https://acurazine.com/forums/2g-tsx-tires-wheels-suspension-300/just-ordered-some-20mm-15mm-ichiba-v2-wheel-spacers-781855/
Now does any wheel expert know if ill have trouble with the S Techs?
They look amazing for stock height. I dont want the drop to cause rubbing
Last edited by MoaarLow; 01-31-2012 at 08:58 PM.
#175
Pro
Thread Starter
Blowing up my own thread. But heres 15mm front 20mm rear.
A for sure purchase at the end of the week. Sits so flush.
https://acurazine.com/forums/showthread.php?t=781855
Now does any wheel expert know if ill have trouble with the S Techs?
They look amazing for stock height. I dont want the drop to cause rubbing
A for sure purchase at the end of the week. Sits so flush.
https://acurazine.com/forums/showthread.php?t=781855
Now does any wheel expert know if ill have trouble with the S Techs?
They look amazing for stock height. I dont want the drop to cause rubbing
Need some help on this, I want to order my spacers asap so i can mount everything together
#176
ROTAREDOM
Looks like I'll just wait until you figure out what looks best. Thanks for testing this out for me
#177
Pro
Thread Starter
#178
Pro
Thread Starter
Im building this car to give it personality, Along with representing the Cu2 community in a positive way. With that being said, Id like a vote on which roof spoiler to get. Theres 2 different ones.
One Seems to have a little more shape and Curves Up,
http://www.ebay.com/itm/PAINTED-ACUR...ht_6674wt_1037
This one seems to have les shape and be a little Flatter.
http://www.ebay.com/itm/ACURA-TSX-09...ht_4268wt_1270
Heres a thread with a Red Cu2 and the "flatter" Spoiler
https://acurazine.com/forums/2g-tsx-photograph-gallery-144/basque-red-photoshoot-%5B56k-beware-%5D-840487/
I Personally like the first option. I like the Flare it has. Any Opinions?
One Seems to have a little more shape and Curves Up,
http://www.ebay.com/itm/PAINTED-ACUR...ht_6674wt_1037
This one seems to have les shape and be a little Flatter.
http://www.ebay.com/itm/ACURA-TSX-09...ht_4268wt_1270
Heres a thread with a Red Cu2 and the "flatter" Spoiler
https://acurazine.com/forums/2g-tsx-photograph-gallery-144/basque-red-photoshoot-%5B56k-beware-%5D-840487/
I Personally like the first option. I like the Flare it has. Any Opinions?
#180
ROTAREDOM
My vote is for none, never really liked roof spoilers. Just my
I would say take one step at a time. Get your springs and spacers installed first. Take a break from spending money, clear your headlights for free, then take the pink out of your tails for free. Buy the lip spoiler for the trunk. Save money, buy some red overlays for your tailights for $8. Save money, paint your ASS black where the diffusers are. Buy a replica lip kit from ebay, paint match and install white LED strip. Wrap your grille in CF vinyl.... Shit, this just turned into my list of things to do haha.
I would say take one step at a time. Get your springs and spacers installed first. Take a break from spending money, clear your headlights for free, then take the pink out of your tails for free. Buy the lip spoiler for the trunk. Save money, buy some red overlays for your tailights for $8. Save money, paint your ASS black where the diffusers are. Buy a replica lip kit from ebay, paint match and install white LED strip. Wrap your grille in CF vinyl.... Shit, this just turned into my list of things to do haha.
#181
Pro
Thread Starter
ii like the first because it makes the roof flare at the end, Second kinda looks droopy So to speak.. Desicions desicions!! Do you have pics of yours on your trunk?
Springs are being picked up Saturday, I don't want to order spacers until the car is lowered and I can measure to be sure the rear will clear with the 20mm.
Reason for me going wl the roof spoiler is that PWP BWP is very common on our CU2's. We all run the trunk lip, I want something to make my BWP different. So that MoaarLow comes up with people discuss a roof spoiler whether good or bad.
Diffuser, Trunk Bar, A Are all getting painted when the weather is a little nicer outside. I work 6AM-6PM Weekdays and Till 11pm or 3 on weekends. I need to find time on a nice Day to get it done. that's free tho so I'm okay on waiting.
No kit until bigger wheels. IMHO kit makes the body bolder and the 17"s look worse than on a stock lowered Body, Besides.. It's a Lease so a Kit might be out of the question.
Clearing Headlights I'd Love to do, But I'm scared Shitless to open them up and Re Seal them. If you guys would like to get together and Help out Id be more than willing to tackle it with my CU2 Bros. But not alone. Don't trust myself.
And as far as CF grille, Im staying Chrome, Again.. Just to be different.
I hope I mentioned all of your post. I'm at work and on a small break,
I do appreciate all of your Ideas I take everything into consideration. After All, that's what this forum is for!
Oh and Btw, Im not Rushing, But I don't want to take my time. Reason Being I may go back to school which means I will drop about $1000 a month in Income, So mods will stop as well. And I'm also trying to pick up a 600RR or R6 by the Summer time If all moves along with the CU2.
Comming from 300+ All Wheel Horse Sti to a CU2 I feel Sluggy. I need something to get that excitement Back, And my sisters Fiancé Tracks a Zx12r I believe. so he would take me out to the track where you're in full gear with paramedics by. I'm not one you'll see at 130 on an interstate trying to kill myself
My vote is for none, never really liked roof spoilers. Just my
I would say take one step at a time. Get your springs and spacers installed first. Take a break from spending money, clear your headlights for free, then take the pink out of your tails for free. Buy the lip spoiler for the trunk. Save money, buy some red overlays for your tailights for $8. Save money, paint your ASS black where the diffusers are. Buy a replica lip kit from ebay, paint match and install white LED strip. Wrap your grille in CF vinyl.... Shit, this just turned into my list of things to do haha.
I would say take one step at a time. Get your springs and spacers installed first. Take a break from spending money, clear your headlights for free, then take the pink out of your tails for free. Buy the lip spoiler for the trunk. Save money, buy some red overlays for your tailights for $8. Save money, paint your ASS black where the diffusers are. Buy a replica lip kit from ebay, paint match and install white LED strip. Wrap your grille in CF vinyl.... Shit, this just turned into my list of things to do haha.
Reason for me going wl the roof spoiler is that PWP BWP is very common on our CU2's. We all run the trunk lip, I want something to make my BWP different. So that MoaarLow comes up with people discuss a roof spoiler whether good or bad.
Diffuser, Trunk Bar, A Are all getting painted when the weather is a little nicer outside. I work 6AM-6PM Weekdays and Till 11pm or 3 on weekends. I need to find time on a nice Day to get it done. that's free tho so I'm okay on waiting.
No kit until bigger wheels. IMHO kit makes the body bolder and the 17"s look worse than on a stock lowered Body, Besides.. It's a Lease so a Kit might be out of the question.
Clearing Headlights I'd Love to do, But I'm scared Shitless to open them up and Re Seal them. If you guys would like to get together and Help out Id be more than willing to tackle it with my CU2 Bros. But not alone. Don't trust myself.
And as far as CF grille, Im staying Chrome, Again.. Just to be different.
I hope I mentioned all of your post. I'm at work and on a small break,
I do appreciate all of your Ideas I take everything into consideration. After All, that's what this forum is for!
Oh and Btw, Im not Rushing, But I don't want to take my time. Reason Being I may go back to school which means I will drop about $1000 a month in Income, So mods will stop as well. And I'm also trying to pick up a 600RR or R6 by the Summer time If all moves along with the CU2.
Comming from 300+ All Wheel Horse Sti to a CU2 I feel Sluggy. I need something to get that excitement Back, And my sisters Fiancé Tracks a Zx12r I believe. so he would take me out to the track where you're in full gear with paramedics by. I'm not one you'll see at 130 on an interstate trying to kill myself
#182
ROTAREDOM
Dude u can do your headlights! If you were in central Florida I would help you out! Honestly it seems scary at first but it's really not bad at all. Me and my gf tackled it in about 4 hours. If you do decide you want to clear them out shoot me a pm after you have read kowloons DIY and I'll give you some tips too! Hardest part was taking the bumper off lol
#184
Pro
Thread Starter
Dude u can do your headlights! If you were in central Florida I would help you out! Honestly it seems scary at first but it's really not bad at all. Me and my gf tackled it in about 4 hours. If you do decide you want to clear them out shoot me a pm after you have read kowloons DIY and I'll give you some tips too! Hardest part was taking the bumper off lol
And As far as the bumper Pyro removes his every time he messes with his fogs. So we should be able to tackle that. Im going to look at the DIY right now and see how i feel about it.
So ill be hammered and saturday i shall recover lol. Back to the shitty 7 days a week sunday morning.. So we have to actually plan a weekend so i can request off so we'd have the whole day to work on the cars
#185
Pro
Thread Starter
Getting Lowered on Stechs tomorrow.
And i got my Metallic Red Foamposites so that was my spoiler and trunk lip money but ill still get one or the other, havent decided which first... Just taking it one mod at a time.
And i got my Metallic Red Foamposites so that was my spoiler and trunk lip money but ill still get one or the other, havent decided which first... Just taking it one mod at a time.
#186
lmao you got some bday money comin in im sure. you can get the lips too haha. PS: keep me updated on the releases? seems like a good way to make some money. buy shoes, sell shoes i just don't have my kicks game up. i usually rock loafers, dress shoes, and boots. and i like suede hahaha. my only kicks are for workin out
#187
Pro
Thread Starter
lmao you got some bday money comin in im sure. you can get the lips too haha. PS: keep me updated on the releases? seems like a good way to make some money. buy shoes, sell shoes i just don't have my kicks game up. i usually rock loafers, dress shoes, and boots. and i like suede hahaha. my only kicks are for workin out
BUT! I want my CBR600RR or R6 so im trying to stay in control.
And theyre gone bro. for sale online at 12:00 . i Checke dout at 12:01. ALL MENS SIZES sold out by 12:03. I tried for a second pair at 12:02 and i was already to late....
But it def a way to make money. You buy 2 pairs. One for you one to sell. Buy for $200. Resell for $400 next few days after release. You basically get your pair for free. You hjust have to know whats going to have a good resale value and worth flipping
#188
Pro
Thread Starter
Sitting on Stechs
Before it was a 3.5 finger gap.. Now im down to about 1.5 rear if i remember correctly. and only 1 finger up front. and its 1 finger at a slight angle
Before it was a 3.5 finger gap.. Now im down to about 1.5 rear if i remember correctly. and only 1 finger up front. and its 1 finger at a slight angle
#190
Pro
Thread Starter
#193
Pro
Thread Starter
Thnks Guys, Just checked now, there is no Finger Gap, All of em can take a finger but it goes Upward.. And my rear so needs spacers!!
If anyone is wondering how the ride feels. I've driven 50 miles on them since. I will say the car is Noticably Firmer. Ofcourse you feel bumps a little more, But it just feels tighter. Less body Roll. Car is much more stable switching lanes at higher speeds and just hugging turns. A RSB is in my to do list. I'm sure that'll give me the feeling I want
If anyone is wondering how the ride feels. I've driven 50 miles on them since. I will say the car is Noticably Firmer. Ofcourse you feel bumps a little more, But it just feels tighter. Less body Roll. Car is much more stable switching lanes at higher speeds and just hugging turns. A RSB is in my to do list. I'm sure that'll give me the feeling I want
Last edited by MoaarLow; 02-05-2012 at 05:03 AM.
#195
Pro
Thread Starter
&& Idk about the tires, Id rather put that money to a new set of wheels. $500 in tires, $250 in Spacers I'm at $750. Another $200-$300 bucks I can have some aftermarket wheels with the specs I want and avoid using spacers. Still undecided.
But I fell in love wl my car again!
Rear away Bar in a few weeks. Have some goodies I need before then
#196
ROTAREDOM
I love the fact that when you install the stechs the car looks how is supposed to now. Looks OEM, can't wait to install mines! Good job bro, insterested to see with spacers!
#197
Pro
Thread Starter
Yes Sir. It sits at the fenders all around. The front dont look so bad, But the rears are begging for them. I have to measure out i dont want to rub with these huge tires. i hope 20's clear.
#198
ROTAREDOM
This might be a stupid question but what happens if you just install springs on the front? make it look like a lexus or BMW the way it angles toward the ground.