Turbo build 2009 tsx k24z3
10-31-2013, 03:17 PM
#441
TSX AMG Type //M i-VVT
My tune has been done for awhile. He said this is the first time he got an edyno reading of less than 200whp. He was shocked that I only gained 5hp after the tune and all my mods. It couldddd be the road im on but the road looks pretty damn flat to me. I don't have spare money to get real dyno runs so it will remain a mystery lol. My next blame is the eBay exhaust or my engine is just broken
10-31-2013, 03:38 PM
#442
ROTAREDOM
10-31-2013, 05:03 PM
#443
Advanced
The 2" isn't helping you. K Series loves 3" straight through exhausts.
Yeah I've been here for YEARS lol
Yeah I've been here for YEARS lol
10-31-2013, 05:13 PM
#444
Burning Brakes
Thread Starter
10-31-2013, 05:15 PM
#445
Burning Brakes
10-31-2013, 05:17 PM
#446
Burning Brakes
10-31-2013, 05:19 PM
#447
Advanced
10-31-2013, 05:23 PM
#448
Burning Brakes
Thread Starter
Boazzer we need to get you on a dyno and see what it says it's not to much to have it put on and see what the numbers are it's the tunning that coasts call around
10-31-2013, 05:39 PM
#449
Burning Brakes
Like I said I don't have money to get a dyno run which im sure cost anywhere from 75-150. Flash pro is expensive lol. I will try to get a real dyno run after I do some maintenance, car is about to hit 50k :'(
10-31-2013, 10:14 PM
#450
Burning Brakes
Thread Starter
Yeah I'm in the same boat, stuff I want to do but cash flow is zero
10-31-2013, 10:50 PM
#451
TSX AMG Type //M i-VVT
11-04-2013, 08:48 PM
#452
Burning Brakes
Thread Starter
Thinking about what I want to do with my exhaust the two chamber flowmaster is killing me slowly droanning my brain away one call at a time
this is my favorite idea two of them with a resonator in the middle
What do you think
this is my favorite idea two of them with a resonator in the middle
What do you think
11-05-2013, 12:48 PM
#453
ROTAREDOM
Checkout the dual tip exhaust from the TL-S. Some Russian guys on the forum have done it and it looks pretty sweet.
11-05-2013, 02:49 PM
#454
Burning Brakes
Thread Starter
I was thinking that the angle of the bumper on the TL and the way the tips are cut would look funny on our streight bumper I would like to see a picture the type s is one of my favorite exhausts
11-05-2013, 04:54 PM
#455
ROTAREDOM
You might be right about that angle!
11-06-2013, 05:05 PM
#457
Burning Brakes
Thread Starter
The following users liked this post:
UTAH TSX (12-21-2013)
11-13-2013, 09:40 AM
#460
Burning Brakes
I am talking to the shop that is going to install it. They are ready. I'm ready also. Hopefully in the next few weeks I can do this.
I have one last purchase order going to Axion for the final parts list that Utah gave me, and then I am ready to just do it.
I have one last purchase order going to Axion for the final parts list that Utah gave me, and then I am ready to just do it.
The following users liked this post:
MGCU2 (11-13-2013)
11-13-2013, 03:36 PM
#462
Burning Brakes
Thread Starter
Snapped a picture of optimus with his new turbo
The following 5 users liked this post by UTAH TSX:
Chintow (01-22-2014),
iCrap (11-20-2013),
optimusaccord (11-22-2013),
richyrich1988 (01-02-2014),
Snorlax (05-11-2014)
11-13-2013, 04:49 PM
#463
Burning Brakes
^^ nice.
I do have the diff in hand, they will be trying to give it a go when they have it in the shop. It should work though, I am feeling optimistic about it.
I do have the diff in hand, they will be trying to give it a go when they have it in the shop. It should work though, I am feeling optimistic about it.
11-20-2013, 04:04 PM
#464
Burning Brakes
Thread Starter
VitViper tunning AAA plus rating
All finished tunning with VitViper tunning, what a good guy to work with, the car runs perfect better than stock smooth and when the boost hits hold on, if you want a tune for cheaper and IMO better than a dyno tune hav Vit do it, I have been converted will never do a dyno tune again for drivability I will do a base dyno run to get the HP numbers as soon as I save up a few bucks saved up, will get some videos soon also.
(I FREAKING LOVE MY CAR NOW WHAT A BEAST IT IS)
(I FREAKING LOVE MY CAR NOW WHAT A BEAST IT IS)
The following 4 users liked this post by UTAH TSX:
11-21-2013, 07:47 AM
#465
Intermediate
Awesome news! Cannot wait for the video. Hoping to get a min to pm you soon while Im not working as I am all for this idea, want turbo so badly. Good to hear its all coming together man
11-21-2013, 09:43 AM
#468
Burning Brakes
Thread Starter
The following users liked this post:
thunderbt3 (11-21-2013)
11-22-2013, 10:19 AM
#469
Burning Brakes
I went to adrenaline yesterday, they are going to pencil me in for January/February time frame for the build to happen.
I'm going to have them create an exhaust for me as there is not really one available for ours cars at present.
I'm going to have them create an exhaust for me as there is not really one available for ours cars at present.
11-24-2013, 10:22 PM
#470
Burning Brakes
Thread Starter
3.0 Exhaust system
Ok I finally made up my mind on the exhaust I had a magnaflow dual outlet muffler with 3in. tips and I took off the flowmaster dual chamber muffler and put it on it is a lot less drony and sounds good when the boost hits (loud) so I ordered another one to match and a 3in. magnnaflow resonator (I might have to put 2 resonators to get rid of the droan) I need to fine toon the cutout for the dual tip the top looks a little crooked
Last edited by UTAH TSX; 11-24-2013 at 10:25 PM.
The following 3 users liked this post by UTAH TSX:
12-08-2013, 11:56 AM
#472
Burning Brakes
Thread Starter
Dual tip magnaflow mufflers and resonator 3 inch
Cold start up 18 deg. thinking on adding one more resonator car still has some interior drone that I don't like, will get more videos when the weather gets better
The following users liked this post:
UTAH TSX (12-17-2013)
12-09-2013, 05:29 PM
#474
Burning Brakes
Thread Starter
Thanks, it's about a 1/4 in off the bumper still need to trim a little to make it streight I dont think it will melt but I can adjust it if needed
12-16-2013, 08:42 PM
#476
1st Gear
Join Date: Dec 2013
Age: 33
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
hey UTAH TSX. I'm a rookie in the game. can you give me additional help? can you help me build a kit. i just want around the same hp you had in your youtube video. instead of 9 psi. ill pump 10 max. thanks
The following users liked this post:
UTAH TSX (12-17-2013)
12-25-2013, 01:23 PM
#478
Burning Brakes
Thread Starter
Merry Christmas to all
I'm having fun spoiling the kids, the car got nothing it's been spoiled all year
I'm having fun spoiling the kids, the car got nothing it's been spoiled all year
The following users liked this post:
thunderbt3 (12-25-2013)
12-31-2013, 08:16 PM
#479
Burning Brakes
Thread Starter
Custom exhaust is finished
Magnaflow mufflers and resonator wrapped to try and reduce the droan no converters