View Poll Results: What am i doing
Voters: 281. You may not vote on this poll
Now what am i up to
#1441
Senior Moderator
Thread Starter
The following users liked this post:
3.2TLc (08-13-2014)
#1443
Senior Moderator
Thread Starter
I cant find the piece of paper from the machine shop right now but i do know it was over the service limit. If memory serves correctly it was .060 for the block, heads were .002 and the head gasket was .027
The following users liked this post:
03 tls nc (08-13-2014)
#1444
The car's rear is starting to shape up and taking on a much newer updated appearance.
The lower diffuser will enhance the bumper and once the license plate's pocket is in place, it'll all come together. As of now, just a bit leary of the sharp accent sculpture lines above the plate area. Sorta has a bit too much Euro "German" look, IMO. Perhaps the new smoked tails will finish things out and make things flow.
Keep up the good work with the body mods !!!
The lower diffuser will enhance the bumper and once the license plate's pocket is in place, it'll all come together. As of now, just a bit leary of the sharp accent sculpture lines above the plate area. Sorta has a bit too much Euro "German" look, IMO. Perhaps the new smoked tails will finish things out and make things flow.
Keep up the good work with the body mods !!!
#1446
Senior Moderator
Thread Starter
Hummmm thats odd.
#1447
Pro
iTrader: (6)
From the math I did and talking with the guys at King .040 is = to 1 point of compression. My j35a3 has 10:1 pistons and I'm using j32a2 cams, so I at least need to get back to the 10.5:1 of the j32a2 cams milling .020. It cost me $1/ .001 milled for both heads, wanting to raise compression as much as possible from milling the heads but don't want to get into timing or valve to piston issues.
#1448
Senior Moderator
Thread Starter
That raised your static compression about 2 points? Did you have any valve to piston clearance issue cutting that much? How much room is there to play with?
From the math I did and talking with the guys at King .040 is = to 1 point of compression. My j35a3 has 10:1 pistons and I'm using j32a2 cams, so I at least need to get back to the 10.5:1 of the j32a2 cams milling .020. It cost me $1/ .001 milled for both heads, wanting to raise compression as much as possible from milling the heads but don't want to get into timing or valve to piston issues.
From the math I did and talking with the guys at King .040 is = to 1 point of compression. My j35a3 has 10:1 pistons and I'm using j32a2 cams, so I at least need to get back to the 10.5:1 of the j32a2 cams milling .020. It cost me $1/ .001 milled for both heads, wanting to raise compression as much as possible from milling the heads but don't want to get into timing or valve to piston issues.
The following users liked this post:
03 tls nc (08-14-2014)
#1449
Senior Moderator
Thread Starter
The following users liked this post:
Yumcha (08-21-2014)
#1452
Senior Moderator
#1454
Senior Moderator
Thread Starter
#1455
Senior Moderator
Thread Starter
#1457
Senior Moderator
Thread Starter
#1459
Senior Moderator
Thread Starter
#1461
Senior Moderator
Thread Starter
#1462
Senior Moderator
Thread Starter
The following users liked this post:
3.2TLc (08-26-2014)
#1464
Senior Moderator
#1466
Senior Moderator
Thread Starter
#1467
Senior Moderator
Thread Starter
#1468
Senior Moderator
Thread Starter
#1469
a slight clarification on fattys name as he originally explained to me years ago = Fast Times WON
#1471
Moderator
PS: I know is Fast Times.. But his Acurazine name is Fsttyms1..
When I'm typing I do like this "F a t t y" because I miss the "S" I blame iOS too since the predictive dictionary already stored "Fatty" so even if I spell it right the auto correct still inputs "Fatty" instead of "Fstty" which still mark it red as spelled wrong hahahaha too lazy to change that out though, just gotta know I mean no bad while saying fatty.
So nope Yumcha didn't started it for me.
When I'm typing I do like this "F a t t y" because I miss the "S" I blame iOS too since the predictive dictionary already stored "Fatty" so even if I spell it right the auto correct still inputs "Fatty" instead of "Fstty" which still mark it red as spelled wrong hahahaha too lazy to change that out though, just gotta know I mean no bad while saying fatty.
So nope Yumcha didn't started it for me.
Last edited by Skirmich; 08-27-2014 at 03:47 PM.
#1473
Senior Moderator
Thread Starter
#1474
Senior Moderator
Thread Starter
Oh and i started to modify and customize the rocker panel side skirts
#1475
Senior Moderator
Thread Starter
And now im laid up on the couch with my back out
#1476
^^^ Lame excuse for taking extra time and being sidetracked, imo. Just getting old !!!
Cut, shape, weld and mold.......how about a chiropracter ?
Cut, shape, weld and mold.......how about a chiropracter ?
#1477
Senior Moderator
#1478
Senior Moderator
Thread Starter
wouldnt do anything. Everything is aligned perfectly. Had x-rays, MRI, and blood work done and there is nothing showing as to why my back goes out.
Last edited by fsttyms1; 08-28-2014 at 06:00 PM.