Does everyone check their Actuator from time to time ?
#123
Suzuka Master
iTrader: (10)
the link is broken now, but i found Chad's FAQ in archive.org
the link to pics of the actuator:
http://web.archive.org/web/200708280...cura/faq/pics/
The link to a video clip of the actuator in action is now broken in the FAQ.
the link to pics of the actuator:
http://web.archive.org/web/200708280...cura/faq/pics/
The link to a video clip of the actuator in action is now broken in the FAQ.
#124
#125
Whats up with RDX owners?
iTrader: (9)
What sort of sound is it? Theres plenty of moving parts in the head.
Do you hear it when the car is stationary and you rev up, or only when driving?
Do you hear it when the car is stationary and you rev up, or only when driving?
#126
stationary and when I am driving. The sound only comes EXACTLY at 4100 when the RPMS DROP. While it goes up the sound doesn't come on at 4100 but only when it comes down.
#127
Whats up with RDX owners?
iTrader: (9)
Put your hand on the actuator and rev up and let the rpms drop. Do you "feel" the noise when you hear it?
#129
I Drive Like A Dick 8≈
Just fixed this yesterday, holy fack what a difference this made. My car feels like new powerwise again, I'm in love...
But seriously people if this isn't working on your car it should definetly be a top priority.
But seriously people if this isn't working on your car it should definetly be a top priority.
#132
checked mine and it is not turning... if fuse is ok should I just buy a new IMRC valve motor or is there something else I should check before getting part? what could be the disadvantage if I tie it open? loss of power on bottom? less efficient mpg? thanks in advance
#135
ABP-KBP-CBP & ME
iTrader: (20)
The common problem with this part has nothing to do with the fuse or the cable its the part itself it isn't made very well and therefore it fails after time. Mine failed once and I replaced it, the part cost about anywhere from $80-$125 depending if you can find a coupon code for some of the part stores.
#136
I Drive Like A Dick 8≈
the thing that fails is the gears inside because honda cheaped out and went with plastic gears, I took mine apart and sure enough broken tooth on one of the gears
#138
hello again, last question about IMRC, sorry to keep reviving this thread. If actator was in working conditions and I unplug it and apply 12 volts from the battery to the terminals on the actuator: it should move / turn? is it 12 volts thar are fed to that motor? should I just forget about any further testing and get a new actuator? (does not move at all when i rev up betwen 4K /5K RPM). All the best!
#139
hello again, last question about IMRC, sorry to keep reviving this thread. If actator was in working conditions and I unplug it and apply 12 volts from the battery to the terminals on the actuator: it should move / turn? is it 12 volts thar are fed to that motor? should I just forget about any further testing and get a new actuator? (does not move at all when i rev up betwen 4K /5K RPM). All the best!
For the longest time my IMRC would make this funny sound every time i turn the ignition to battery. It moves and everything but only when i turn the ignition and at 4100 rpm when it is coming down it would make this odd sound. And GAS MILEAGE IS CRAP! I only get like 220/tank.
I am placing mine on order this weekend.
which leads me to my question... where should I buy my replacement part? I called Acura and they said they only have ONE in the nation and its in Dallas.
#140
ABP-KBP-CBP & ME
iTrader: (20)
hello again, last question about IMRC, sorry to keep reviving this thread. If actator was in working conditions and I unplug it and apply 12 volts from the battery to the terminals on the actuator: it should move / turn? is it 12 volts thar are fed to that motor? should I just forget about any further testing and get a new actuator? (does not move at all when i rev up betwen 4K /5K RPM). All the best!
BTW its I don't have a CL-P I have a CL-S the p in my screen name is only because the word pass starts with it.
#141
Hello, just wanted to thank Chopsie for posting this thread... even though it is from 6 years ago! I read it by chance and what do you know... my IMRC was not working! Got new one and replaced... WAO!!! big difference.... encourage everyone to check it from time to time as post title says. Took old one appart and the plastic gear had just 1 teeth broken (enough for it not to work at all). Don´t understand meaning of those damm plastic gears connecting to steel or bronze gears (same case with the power window mechanism, motor has strong metal gear and connects to shitty plastic). All the best, PANAMARED
#144
over 100K on my car now and it still works just fine. I rarely go above 3K on the tach but when i put the foot down i can hear it open and the car takes off like it usually does.
Still rolling on the tires that I put on the car at 44K
Still rolling on the tires that I put on the car at 44K
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
79
05-03-2022 08:54 PM
cycdaniel
1G TSX Performance Parts & Modifications
8
12-17-2019 10:58 AM
tman570
2G RL Audio, Bluetooth, Electronics & Navigation
11
06-11-2019 07:56 AM