@ Vince - Sweet, i think i may order a roll as well as some squeegee's. Let me know though since im fairly new to group buys, .

@ Tai - Ballin, i want that. Its like old school with a modern twist. Me like :P

 

So I was at Driven this weekend and to my surprise I saw Sanjay's car there haha.

 

@Quyen - If you're the only one there might not be a point to do a group buy. Buying one roll is $50 for shipping whereas getting two rolls is $60 for shipping. For two people, it's only a savings of $20 so not really worth it for the hassle.

 

One thing I miss about Alberta and its lack of front plateS. Makes the car look super clean.

 

Only pic I got from the meet, aaron already left but came back later. I think Tai took some more pics.



How the car looks now with the J's racing rear diffuser looks bolted up now. Going to Stratotech race track on wednesday, never been tracking before haha

 

@ Jeff - Aw damn, i wanna go too. Got my wheels so im good to roll haha. I doubt my parents'll let me thrash the car a bit :P.

@ Vince - Hey you know what maybe we can both do our roof, since i need to replace my hood cause its like in pieces.

So just outta randomness, anyone have an hour or so to help me with a few installs. Just thought i'd ask is all, if not its alright. Thanks again.

 

Does anyone have type 2 switchbacks, bulb type 7440 they're looking to sell? Prefer 92 or 120 led towers. Those V3 tritons are backorder until end of May and look like they keep getting backordered later and later.

 

I got a pair of V3 tritons, but I am not selling them. Thought I would just mention that...Bahahahahaha jealous? lol

 

Where have you been Ricky?

Awe man Jbond is selling his TL http://edmonton.kijiji.ca/c-cars-veh...eaturedAdZtrue

Hope more people don't sell they're cars...

 

Took the car to the track with some friends today at Stratotech Raceway, was a ton of fun!

 

Just got back from seeing Fast 6! probs my fav out of all of them so far!

 

@Ricky - Haha did you install them yet?

@Aaron - I'll be keeping mine for a while lol. I want Justin's whole tv setup for the navi.

@Jeff - Looks good!

@Tai - Oh I didn't even know it came out already. I saw Iron Man 3 last night. It was meh.

 

 

Nice dude!

Yeah Aaron, my car was in the show, sorta a last minute thing, you can really see how shit the paint is in that lighting haha

 

@Vince
it isnt out yet, i got prescreening! cant believe theyre making a 7th one lol

 

Lucky, I'm seeing it next week when it comes out.
Nice seeing you in chinatown Tai hahaha

 

Tai is everywhere, I saw him at River Cree Casino buffet haha. I didn't know you worked at Cactus Club Aaron, my cousin works there too lol

 

[quote=ArenHam;14481435]Where have you been Ricky?

I was on a vacation for 2 and half months. Got back couple weeks ago and been working mad hours..

[quote=v|nsan|ty;14482553]@Ricky - Haha did you install them yet?

Ya I stilled them last night, BUT one side only works as a signal and no park light and other side is perfect. So I emailed VLED, we shall wait and see what happens! I am kinda ticked off, fucking $125 or something for pair of bulbs and they don't work properly.

 

Haha well now you do
Your cousin Tiffany Gee right? Think she mentioned you haha

 

@Aaron - haha yup, I thought you were eating there. I had 2 entrees lol

 

@Ricky - Yikes that sounds like typical v-leds quality. Nothing I've gotten from them lasts. Luckily Mitch sold me a pair of switchbacks he had from before for insanely cheap. Now I'm back to no amber

 

Yea guys the car is gone .... Sold my element as well lol I needed a vehicle I could drive all year long .... That being said
I HAVE ABRAND NEW SET OF RIMS FOR SALE TIRES NEVER MOUNTED ON THEM FOR SALE 1600 ILL TAJE PUCS WHEN IM BACK FROM MEXICO ON FRIDAY, they are STANCE SC-5 black and machined with a crom lip 19's

 

Got myself some JDM 06-08 Euro R headlights!

 

anyone know an asian girl that drives a stock NBP Type S? trying to race and cut me off from North Edmonton all the way to WEM almost lol

 

Hey guys, new member, so to speak. Joined this site many moons ago but never really got involved.

I drive an ASM TL Type-S 6MT, 2008. Bought it brand new and still loving it. Fully stock, for now. Only replaced the original tires with some Nitto Invo's.

Been contemplating doing the hood with di-noc CF. Anyone have any experience with installing this and have any sources to get it cheap? I was quoted $5/sq. ft.

Also, I read that Silence was just doing some touch up paint. My car needs a little TLC. Would I get the paint through Acura or are there any other recommendations?

Thanks for any feedback!

 

To be honest, since you're car is silver, I would not recommend getting your hood wrapped, it just wouldn't flow or match.
If you're in need for touch up paint, check Honda as well, they have the same paint codes/colors and its a bit cheaper too.

 

Thanks for the input ArenHam. The wrap would have been a last resort if I couldn't get my hands on some touch up paint (the thought never occurred to me tbh).

 

any meet happening soon time?

 

Try plasti dip, I was thinking of plasti dipping my car cause I'm bored. Way cheaper and with plasti dip you can always experiment and try different stuff.

@ricky - Haha the thread has been pretty dead in the past week or two, where is everybody at?

 

@Jeff - Nice those headlights look awesome. Really dig that blue tinge to the diffuser area.

@Sejanus - Welcome! You're the first TL-S to chime in here with a 6 speed. That thing must feel like a totally different car in comparison to an auto TL-S.

I've installed quite a bit of 3M di-noc on my car. Not too difficult, requires patience to get clean installs though. It's best to take whatever it is you're wrapping apart so that you can completely cover the edges so that no seams show. As for the hood, that's not a big deal since you can easily wrap it all under the edge. I don't have a source for lower prices, but I ordered online over a year ago. Like Aaron said, it will look a bit off if that's the only mod you're planning to do. Usually that type of visual mod would go hand in hand with things such as a drop, wheels, etc etc.

I got touch up paint from the dealership before but hated it. Not a fan of the pen style since it's much harder to control how much comes out. I ordered a small bottle from paintscratch.com and it's fine. It's hard to go wrong with a dr.colorchip kit as well. It includes a paint leveler to help blend the touch up paint to the OEM paint. It looks better than doing touch up with a pen but still not as good as going through the whole touch up, wet sand, and polish ordeal.

@Ricky - Pick a date and we'll see who can go! Weekends work best for me.

@Aaron - Haha yeah I've been swamped by work lately. Do any new mods?

 

Only weekends work for me. I am thinking the 22nd week of june, I am busy next couple weekends and ps gotta get wheels powder coated. ps little shit here and there... any other dates? start a list I guess?

 

In for service, got a 2013 TL as a loaner. Love these cars.

 

@Vince - thanks man, ya im happy with them spent a lot of money on them and i got my cutoff back, clear lenses and osram cbi hids look a ton better now.

@Sejanus - welcome! 6 speed TL-S must be awesome to drive

@sanjay - I'll have to ask Chris for a TL one of these days, I've only gotten ILX or TSX lol

Same, weekends or friday nights but i'd prefer the weekend lol

 

hey guys with the non type S 3.2L i have a carbon Fiber Engin cover for sale, just to make the car all around a little more dressy , BUT ALSO ADDS 50hp lol jk
150 takes it it was made by kb1spec or what ever his name is on here
http://www.flickr.com/photos/65898473@N04/8908327514/http://www.flickr.com/photos/65898473@N04/8908327514/ by http://www.flickr.com/people/65898473@N04/, on Flickr

http://www.flickr.com/photos/65898473@N04/8908329852/http://www.flickr.com/photos/65898473@N04/8908329852/ by http://www.flickr.com/people/65898473@N04/, on Flickr

http://www.flickr.com/photos/65898473@N04/8908332460/http://www.flickr.com/photos/65898473@N04/8908332460/ by http://www.flickr.com/people/65898473@N04/, on Flickr


let me know sorry for the shit pics,

Justin 780 966 0839

 

I've been toying with the idea of plastidippin my car lately for the same reason... damn boredom lol. I'd be down for a meet sometime soon as well.

 

my buddy just plastidipped his 135 white, turned out real nice.

 

@Tai - Where did he get that done? or did he do it himself lol

 

@Jeff
it was done by these guys,
https://www.facebook.com/CustomCreationsDipping

 

Jason's? Too bad it doesn't seem like there is much gloss to the plasti-dip. Unless it's meant to be a matte white?

 

@Vince
yeah, its jasons, i think he wanted matte lol