San Diego Meets and Events Part Tres
#7241
Turd Polisher
iTrader: (1)
^ If it's flickering, chances it's a bad ballast.
I'm not sure if the L/R ballasts are different, but you could always try hooking up the driver side ballast and see if your passenger light flickers then?
?
I'm not sure if the L/R ballasts are different, but you could always try hooking up the driver side ballast and see if your passenger light flickers then?
![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
#7245
Previous Owner
I think I'll take you up on it if I have to change the bulb out, if I need to wait for replacement bulbs from warranty. I was going to take it to a local auto shop to get it diagnosed for $90. So after talking to the Kearny Mesa Acura, they'll match it for the diagnosis. I need to get this taken care of asap.
Let me tell you, it's certainly annoying to have a flashing headlight on the highway. People get annoyed at you too.
Let me tell you, it's certainly annoying to have a flashing headlight on the highway. People get annoyed at you too.
#7246
keep it clean
Thorin, I can help you with removing the bumper too. I haven't done much with my headlights, but will certainly offer my help and learn from tommy at the same time.
#7247
Previous Owner
Cool, I went to Marcus @ Heeltoe Automotive last time to change out the bulbs. It took him 5 mins to do that. I call around here and the shops say well it's a 2 hour process to remove the bumper. Argh.
On another note, I'll be calling up Marcus one of these days to change out my shocks. I hear them squeaking in the back when I go over bumps.
Also on another note, does anyone have any friends that works at any Infiniti dealerships? I'm looking to buy the new JX that's coming out next year.
On another note, I'll be calling up Marcus one of these days to change out my shocks. I hear them squeaking in the back when I go over bumps.
Also on another note, does anyone have any friends that works at any Infiniti dealerships? I'm looking to buy the new JX that's coming out next year.
#7250
Previous Owner
Thanks Tommy.
Wtf, the light just stayed on all the way home from work. argh.
What's up Luis, you still have the CL? I'm ready to get a new bigger car now. I got 2 kids now, heh, don't have enough space.
Wtf, the light just stayed on all the way home from work. argh.
What's up Luis, you still have the CL? I'm ready to get a new bigger car now. I got 2 kids now, heh, don't have enough space.
#7252
Turd Polisher
iTrader: (1)
http://www.tl.acurazine.com/forums/s...8#post13418078
Sounds like the same problem you're having, just a little more severe.
Check it.
Sounds like the same problem you're having, just a little more severe.
Check it.
#7253
Previous Owner
Yeah I saw that and posted on there too. People just tell me to swap out the bulb and test which is what's going to happen tomorrow.
My driver's side turned purple in Feb and so I replaced both bulbs w/ the Kaixen ones from Excelerate. Now it's the passenger side that's flickering.
My driver's side turned purple in Feb and so I replaced both bulbs w/ the Kaixen ones from Excelerate. Now it's the passenger side that's flickering.
#7254
Your Girlfriend is in my
If it was posted here, sorry but thought I could give a word out as well.
![](https://i156.photobucket.com/albums/t18/7ender97/hellaflush-8-71.jpg)
![](https://i156.photobucket.com/albums/t18/7ender97/IMAG0181.jpg)
![](https://i156.photobucket.com/albums/t18/7ender97/IMAG0180-1.jpg)
Stolen on 12/6/11 at UCSD. The dude said he was studying overnight at the school, came out at 12:30pm and found his car like that. Hope you guys can give a word out.
- RemieGino14 -
![](https://i156.photobucket.com/albums/t18/7ender97/hellaflush-8-71.jpg)
![](https://i156.photobucket.com/albums/t18/7ender97/IMAG0181.jpg)
![](https://i156.photobucket.com/albums/t18/7ender97/IMAG0180-1.jpg)
Stolen on 12/6/11 at UCSD. The dude said he was studying overnight at the school, came out at 12:30pm and found his car like that. Hope you guys can give a word out.
- RemieGino14 -
Last edited by RemieGino14; 12-13-2011 at 06:27 PM.
#7255
says "hello to my TLX".
Yeah, still got the CL. Didn't break 100k miles until just recently. Runs like a champ.
It would be nice to see you at a meet sometime. Looks like we've got someone planning one for the very near future.
*wink wink* Tommy
#7257
Your Girlfriend is in my
- RemieGino14 -
#7259
Racer
Can you do some plastic bumper repair also?
I'm posting it here and not pm because i thought maybe you want to keep trading your skills for some scratch.
Heres some details:
https://acurazine.com/forums/2g-cl-2001-2003-50/plastic-bumper-skin-cover-822101/
#7263
Senior Moderator
Cool, I went to Marcus @ Heeltoe Automotive last time to change out the bulbs. It took him 5 mins to do that. I call around here and the shops say well it's a 2 hour process to remove the bumper. Argh.
On another note, I'll be calling up Marcus one of these days to change out my shocks. I hear them squeaking in the back when I go over bumps.
Also on another note, does anyone have any friends that works at any Infiniti dealerships? I'm looking to buy the new JX that's coming out next year.
On another note, I'll be calling up Marcus one of these days to change out my shocks. I hear them squeaking in the back when I go over bumps.
Also on another note, does anyone have any friends that works at any Infiniti dealerships? I'm looking to buy the new JX that's coming out next year.
#7265
Racer
#7266
Turd Polisher
iTrader: (1)
Are you AT or 6MT?
I've heard good and bad things about the XRL8 mounts, a member with a 3G 5AT TL with minor bolt ons has gone through 2 front mounts because the metal tab that bolts onto the engine itself broke off.
The 62A poly bushings aren't going to be doing you any favors either .. XLR8 do claim they use different poly material than Innovative, but if you plan on doing any kind of aggressive driving .. I would do 75A / 85A. I would also recommend finding any kind of torque damper / upgraded transmission mounts so it'll alleviate as much engine movement as possible.
Here's my 65A Innovative bushings after 1 year, 25,000 miles on my daily:
![](http://i109.photobucket.com/albums/n53/Engage373/photo1-1.jpg)
Bushings on top were my side mount near the AC / PS (Not too bad), bottom bushings were on my front mount which are clearly lopsided and damaged.
I've heard good and bad things about the XRL8 mounts, a member with a 3G 5AT TL with minor bolt ons has gone through 2 front mounts because the metal tab that bolts onto the engine itself broke off.
The 62A poly bushings aren't going to be doing you any favors either .. XLR8 do claim they use different poly material than Innovative, but if you plan on doing any kind of aggressive driving .. I would do 75A / 85A. I would also recommend finding any kind of torque damper / upgraded transmission mounts so it'll alleviate as much engine movement as possible.
Here's my 65A Innovative bushings after 1 year, 25,000 miles on my daily:
![](http://i109.photobucket.com/albums/n53/Engage373/photo1-1.jpg)
Bushings on top were my side mount near the AC / PS (Not too bad), bottom bushings were on my front mount which are clearly lopsided and damaged.
Last edited by TylerT; 12-21-2011 at 10:49 AM.
#7267
Senior Moderator
Car is running strong Luis!
Tyler, i have the innovative front/side on the car right now and they need to be replaced.
so no one has the new mounts?![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
anyone interested in a new set of p2r Thermal Intake Gaskets and throttle body spacer? link to the p2r thread.
https://acurazine.com/forums/showthr...&highlight=p2r
Tyler, i have the innovative front/side on the car right now and they need to be replaced.
so no one has the new mounts?
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
anyone interested in a new set of p2r Thermal Intake Gaskets and throttle body spacer? link to the p2r thread.
https://acurazine.com/forums/showthr...&highlight=p2r
Last edited by Mike; 12-21-2011 at 12:28 PM.
The following users liked this post:
AcuraIntegTL (12-21-2011)
#7268
keep it clean
I was thinking about getting the P2R TB spacer, but not sure if I should get my front and rear sway bars upgraded first. The current package deal that XLR8 has for the P2R is making it hard to pass up. What do you guys think I should get first, the P2R TB and gaskets w/thermal manifold gasket, or solid front Type-S sway bar and Progress rear sway bar? Thanks.
Last edited by AcuraIntegTL; 12-21-2011 at 05:05 PM. Reason: Minor Details
#7269
Turd Polisher
iTrader: (1)
^ Sways any day.
I personally had the P2R spacer on my 3G TL and didn't notice any difference .. I felt a bigger difference overall when I did the coolant bypass on the throttle body .. car felt much less heatsoaked.
I personally had the P2R spacer on my 3G TL and didn't notice any difference .. I felt a bigger difference overall when I did the coolant bypass on the throttle body .. car felt much less heatsoaked.
#7271
Senior Moderator
I was thinking about getting the P2R TB spacer, but not sure if I should get my front and rear sway bars upgraded first. The current package deal that XLR8 has for the P2R is making it hard to pass up. What do you guys think I should get first, the P2R TB and gaskets w/thermal manifold gasket, or solid front Type-S sway bar and Progress rear sway bar? Thanks.
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
the dyno results are in the link above.
#7272
Suzuka Master
Happy Holidays Guys! everyone have a safe holiday.
The following 3 users liked this post by pohljm:
The following 2 users liked this post by KN.TL06:
AcuraIntegTL (12-25-2011),
Sun Diego CL-S (12-23-2011)
The following users liked this post:
AcuraIntegTL (12-25-2011)
#7275
keep it clean
#7278
Turd Polisher
iTrader: (1)
Wattup Mike!