All Oregon Chat Thread
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.

Whats that make, 3 TLs and 3 TSXs now?
Welcome to the thread.
learned some new stuffs on cars today...
when header gets heated up, it causes the unburnt gas in the exhaust fume to detonate before reaching the cat. so what people here is air whooshing sound what actually is an exhaust detonation.
this makes sense since richie's precat deletes is just a straight pipe acting as a header and when this thing gets heated up, it detonates unfiltered exhaust gas creating air whooshing sound. so unless if i put the cats back on, i'll continually here the air leaking sound.
when header gets heated up, it causes the unburnt gas in the exhaust fume to detonate before reaching the cat. so what people here is air whooshing sound what actually is an exhaust detonation.
this makes sense since richie's precat deletes is just a straight pipe acting as a header and when this thing gets heated up, it detonates unfiltered exhaust gas creating air whooshing sound. so unless if i put the cats back on, i'll continually here the air leaking sound.
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.

And my job is hard......
learned some new stuffs on cars today...
when header gets heated up, it causes the unburnt gas in the exhaust fume to detonate before reaching the cat. so what people here is air whooshing sound what actually is an exhaust detonation.
this makes sense since richie's precat deletes is just a straight pipe acting as a header and when this thing gets heated up, it detonates unfiltered exhaust gas creating air whooshing sound. so unless if i put the cats back on, i'll continually here the air leaking sound.
when header gets heated up, it causes the unburnt gas in the exhaust fume to detonate before reaching the cat. so what people here is air whooshing sound what actually is an exhaust detonation.
this makes sense since richie's precat deletes is just a straight pipe acting as a header and when this thing gets heated up, it detonates unfiltered exhaust gas creating air whooshing sound. so unless if i put the cats back on, i'll continually here the air leaking sound.
My job is brutal
Interesting about the headers, I never knew that, I just assumed it was the flexpipe getting torqued around a bit.
Welcome to Michael921.
If everyone was on here that was at the Wash. Square meet last year we'd have at least 15 people on here posting but half of them have disappeared
Interesting about the headers, I never knew that, I just assumed it was the flexpipe getting torqued around a bit.
Welcome to Michael921.
If everyone was on here that was at the Wash. Square meet last year we'd have at least 15 people on here posting but half of them have disappeared
much more free reving engine and increased hp is good. but increased drone is
went to exhaust shop and cut out the old tanabe resonator and slapped on longer one for $80 installed. my original plan was to put a smaller resonator along with the tanabe and hear the difference but shop was out of stock on smaller ones.
result is drone is gone. inside is oem quiet. along with drone, loud humming that vibrated into the cabin is gone too. bad thing is, this resonator increased the restriction while quieting down. it doesn't rev like before but definitely gained some low-end torque back. now i might put the atlp race pipe back on and see if it'll rev more freely.
if i don't like any combination at the end, i'll go back to oem precats + atlp jpipe+atlp race pipe and gut out secondary oem resonator.
modding car = test & waste money
ya there's also the difference of having something fun and quick to drive around and something more - umm baller?? baller cars dont really come in MT thats the way i look at it
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
much more free reving engine and increased hp is good. but increased drone is 
went to exhaust shop and cut out the old tanabe resonator and slapped on longer one for $80 installed. my original plan was to put a smaller resonator along with the tanabe and hear the difference but shop was out of stock on smaller ones.
result is drone is gone. inside is oem quiet. along with drone, loud humming that vibrated into the cabin is gone too. bad thing is, this resonator increased the restriction while quieting down. it doesn't rev like before but definitely gained some low-end torque back. now i might put the atlp race pipe back on and see if it'll rev more freely.
if i don't like any combination at the end, i'll go back to oem precats + atlp jpipe+atlp race pipe and gut out secondary oem resonator.
modding car = test & waste money
went to exhaust shop and cut out the old tanabe resonator and slapped on longer one for $80 installed. my original plan was to put a smaller resonator along with the tanabe and hear the difference but shop was out of stock on smaller ones.
result is drone is gone. inside is oem quiet. along with drone, loud humming that vibrated into the cabin is gone too. bad thing is, this resonator increased the restriction while quieting down. it doesn't rev like before but definitely gained some low-end torque back. now i might put the atlp race pipe back on and see if it'll rev more freely.
if i don't like any combination at the end, i'll go back to oem precats + atlp jpipe+atlp race pipe and gut out secondary oem resonator.
modding car = test & waste money
Good luck with your set-up.
haha nothing is public property anymore - especially if your trying to take pictures, which doesnt make sense cuz you could be doing a lot worse things like umm idk stealing somthin
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.

Damn kids and there import fast and furry cars
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
Ha, his car was the main subject in the pics. I was burnt out of taking pics of my car. Since last friday ive done 4 shoots. Rolling shots, shots with Min, shots with GTR, and shots with Chris. You can ask him..all i wanted to shoot was someone elses car lol.
Ill have the rest up today, and i know Chris has a bunch.
Ill have the rest up today, and i know Chris has a bunch.
haha hey now - i'm almost still a kid lol - and ur not much older - in fact i think im the youngest person on the oregon chat forum here << yay for me - ill get id'd at the bars long after all of you haha
but at least we dont drive those imported rice cars - we drive luxury - high 5 for us haha
but at least we dont drive those imported rice cars - we drive luxury - high 5 for us haha
Thread Starter
Nikon Neck Beard Krew
iTrader: (5)
Joined: Mar 2007
Posts: 1,922
Likes: 5
From: Clack-Attack, OR.
I'll start getting my ready now. It was a good time. Funny how if I want to to bridgeport and blow some cash it's completely public but if I want to take a picture of a concrete wall it's illegal and "no part of bridgeport is public property" that guy was a loser.
another person to the chat!!! Welcome..
BTW the second pic were the TL is up a level then the TL is kinda funny.. you sayn the TL is better? hmmm?? haha JP great pics!!
oh and i just ordered a early Xmas gift from santa so hopefully if we do a winter meet i can have it on.. its coming from asia =)
BTW the second pic were the TL is up a level then the TL is kinda funny.. you sayn the TL is better? hmmm?? haha JP great pics!!
oh and i just ordered a early Xmas gift from santa so hopefully if we do a winter meet i can have it on.. its coming from asia =)
and trust me urs doesn't look like a 4x4 compaired to mine lol...i preordered suspension from ksport though =] i cant wait. this is the 4th set of coilovers ive bought from the in last 10 months - personally i think it should buy 3 get one free but they dont seem to like that idea lol
EuroR08 - I think I'm going to pick up some Tanabe S-OC's for my xmas gift to myself. Maybe Speed would cut me a deal better than heeltoe????? maybe?????? lol
ABP1TSX - My wheels are 17's, the TL-S wheels have a different offset I believe than the OEM TSX wheels, and the sidewall may be a lil taller making the car overall look lower as an illusion???
bluecarbonfiber - that sucks! fecking stupid ass teenagers!!!!!!
ABP1TSX - My wheels are 17's, the TL-S wheels have a different offset I believe than the OEM TSX wheels, and the sidewall may be a lil taller making the car overall look lower as an illusion???
bluecarbonfiber - that sucks! fecking stupid ass teenagers!!!!!!
i previously bought my tanabes from speed concept. much better pricing than heeltoe and it wasn't backordered. took only a week to get it in. but tanabe might have incresed there price too like tein. check to see if tanabe makes coilovers that are compatible with teas. i think teas is much better than edfc.



























hi everyone...