Hampton Roads, VA (Register Here)
Sorry guys, just got back from a date. Eric call me when you decide to drop by DTP. I will roll out there with you. Just to see what's up.
Jeff made a good point about the dynos. I will probably run over to Keenan's soon to see what I'm pulling now. I might as well wait until after my next oil change.
tl2slow - are you still in town? If so let's meet up with Eric to see what you're talking about with your car. Sorry to hear about that. Maybe another shop can straighten everything out. You got so much invested, it would be a shame to let it go now. Besides I want to know how your clutch is doing.
Jeff made a good point about the dynos. I will probably run over to Keenan's soon to see what I'm pulling now. I might as well wait until after my next oil change.
tl2slow - are you still in town? If so let's meet up with Eric to see what you're talking about with your car. Sorry to hear about that. Maybe another shop can straighten everything out. You got so much invested, it would be a shame to let it go now. Besides I want to know how your clutch is doing.
Sorry guys, just got back from a date. Eric call me when you decide to drop by DTP. I will roll out there with you. Just to see what's up.
Jeff made a good point about the dynos. I will probably run over to Keenan's soon to see what I'm pulling now. I might as well wait until after my next oil change.
tl2slow - are you still in town? If so let's meet up with Eric to see what you're talking about with your car. Sorry to hear about that. Maybe another shop can straighten everything out. You got so much invested, it would be a shame to let it go now. Besides I want to know how your clutch is doing.
Jeff made a good point about the dynos. I will probably run over to Keenan's soon to see what I'm pulling now. I might as well wait until after my next oil change.
tl2slow - are you still in town? If so let's meet up with Eric to see what you're talking about with your car. Sorry to hear about that. Maybe another shop can straighten everything out. You got so much invested, it would be a shame to let it go now. Besides I want to know how your clutch is doing.
ohhhh a date u
funny you mentioned about your oil cuz im at >5% now and I was wondering if it would be a good idea for the engine to take 3 pulls on old oil.
5%?! Hell no I wouldn't dyno! Your engine is not at 100%. I never go below 40%. I'm at 60% right now and almost changed it before the dyno.
fort lee thats kinda a hike. Im not a fan of 460 after that darn ticket. I do have to go up there on may 13th go show them a pic of my car with a front plate
Take a pic or just come down next weekend if you dont go to ny.
When is the next meet ? I need to show off the new ride LOL.
TL2SLOW: When u go home how far away are u from brooklyn?
http://richmond.craigslist.org/ctd/1112589051.html
TL2SLOW: When u go home how far away are u from brooklyn?
http://richmond.craigslist.org/ctd/1112589051.html
Moved:: Reliable and Fair shops in VA. Beach>??
Hey anyone know of some great shops in the Virginia Beach (Hampton Roads) area?? I'll be building my TL soon and would appreciate any info on some great shops to go too. Thanks in advance!! 
~B

~B
Welcome...
There are some members in the area that know of quite a few good shops. I can't really help, i try to do most of the work myself, but I am sure some of the other members will chime in when the check this thread. Keep your eyes open for meets and check this thread frequently. We try to do local meets every once in a while.
There are some members in the area that know of quite a few good shops. I can't really help, i try to do most of the work myself, but I am sure some of the other members will chime in when the check this thread. Keep your eyes open for meets and check this thread frequently. We try to do local meets every once in a while.
Welcome...
There are some members in the area that know of quite a few good shops. I can't really help, i try to do most of the work myself, but I am sure some of the other members will chime in when the check this thread. Keep your eyes open for meets and check this thread frequently. We try to do local meets every once in a while.
There are some members in the area that know of quite a few good shops. I can't really help, i try to do most of the work myself, but I am sure some of the other members will chime in when the check this thread. Keep your eyes open for meets and check this thread frequently. We try to do local meets every once in a while.
. I really want a MT, but seems like there are to come by. I checked out car max, they have two. But i would perfer a MT and will probably hold out for one
Welcome aboard the AZ VA train!!! lol! I know a couple of good shops; also let me know of any advice on DIY performance upgrades.
Good luck in finding a MT around here. I've seen a few on autotrader, but out of the area about a few hours. Very rare! But I don't blame you for holding out. They are well worth the wait IMO!
Good luck in finding a MT around here. I've seen a few on autotrader, but out of the area about a few hours. Very rare! But I don't blame you for holding out. They are well worth the wait IMO!
Adrian- I changed my oil today haha MY first on this car since I bought it 4 years ago. My neighbor gave me some ramps and I was all excited to do it myself. Then I ran into the lowered car big ramp issue.
Now 8 years ago it wouldnt have been a issue with my integra that car was so light I just put bricks down and rolled on the bricks and then the ramp. Now the TL significantly heavier car I was a bit nervous. I sat there and thought about it for 10 mins no lie and then the sun came out and i said fuck it.
Well no probs at all the baby went up easy and I may have gotten a slight scuff on the bottom bumper but I thought o well Im going to put a lip eventually. Only issue was my tires were .5 inches too big but i didnt scrape my rims.
So im ready for dyno now
Mike- When I passed you the other day I realized that you still have my glasses :duh: You can see how dependent i am on those things. Im off this weekend so If its cool or your home id like to swing by.
Now 8 years ago it wouldnt have been a issue with my integra that car was so light I just put bricks down and rolled on the bricks and then the ramp. Now the TL significantly heavier car I was a bit nervous. I sat there and thought about it for 10 mins no lie and then the sun came out and i said fuck it.
Well no probs at all the baby went up easy and I may have gotten a slight scuff on the bottom bumper but I thought o well Im going to put a lip eventually. Only issue was my tires were .5 inches too big but i didnt scrape my rims.
So im ready for dyno now
Mike- When I passed you the other day I realized that you still have my glasses :duh: You can see how dependent i am on those things. Im off this weekend so If its cool or your home id like to swing by.
Just an FYI, I talked to Frank at DTP and he said that the Dyno he has has a correction factor that produces Dyno Jet like numbers. He had a mustang pull 300 on his dyno and 301 on a dynajet the next day.
Adrian- I changed my oil today haha MY first on this car since I bought it 4 years ago. My neighbor gave me some ramps and I was all excited to do it myself. Then I ran into the lowered car big ramp issue.
Now 8 years ago it wouldnt have been a issue with my integra that car was so light I just put bricks down and rolled on the bricks and then the ramp. Now the TL significantly heavier car I was a bit nervous. I sat there and thought about it for 10 mins no lie and then the sun came out and i said fuck it.
Well no probs at all the baby went up easy and I may have gotten a slight scuff on the bottom bumper but I thought o well Im going to put a lip eventually. Only issue was my tires were .5 inches too big but i didnt scrape my rims.
So im ready for dyno now
Mike- When I passed you the other day I realized that you still have my glasses :duh: You can see how dependent i am on those things. Im off this weekend so If its cool or your home id like to swing by.
Now 8 years ago it wouldnt have been a issue with my integra that car was so light I just put bricks down and rolled on the bricks and then the ramp. Now the TL significantly heavier car I was a bit nervous. I sat there and thought about it for 10 mins no lie and then the sun came out and i said fuck it.
Well no probs at all the baby went up easy and I may have gotten a slight scuff on the bottom bumper but I thought o well Im going to put a lip eventually. Only issue was my tires were .5 inches too big but i didnt scrape my rims.
So im ready for dyno now
Mike- When I passed you the other day I realized that you still have my glasses :duh: You can see how dependent i am on those things. Im off this weekend so If its cool or your home id like to swing by.
Adrian- I changed my oil today haha MY first on this car since I bought it 4 years ago. My neighbor gave me some ramps and I was all excited to do it myself. Then I ran into the lowered car big ramp issue.
Now 8 years ago it wouldnt have been a issue with my integra that car was so light I just put bricks down and rolled on the bricks and then the ramp. Now the TL significantly heavier car I was a bit nervous. I sat there and thought about it for 10 mins no lie and then the sun came out and i said fuck it.
Well no probs at all the baby went up easy and I may have gotten a slight scuff on the bottom bumper but I thought o well Im going to put a lip eventually. Only issue was my tires were .5 inches too big but i didnt scrape my rims.
So im ready for dyno now
Mike- When I passed you the other day I realized that you still have my glasses :duh: You can see how dependent i am on those things. Im off this weekend so If its cool or your home id like to swing by.
Now 8 years ago it wouldnt have been a issue with my integra that car was so light I just put bricks down and rolled on the bricks and then the ramp. Now the TL significantly heavier car I was a bit nervous. I sat there and thought about it for 10 mins no lie and then the sun came out and i said fuck it.
Well no probs at all the baby went up easy and I may have gotten a slight scuff on the bottom bumper but I thought o well Im going to put a lip eventually. Only issue was my tires were .5 inches too big but i didnt scrape my rims.
So im ready for dyno now
Mike- When I passed you the other day I realized that you still have my glasses :duh: You can see how dependent i am on those things. Im off this weekend so If its cool or your home id like to swing by.
BTW, Jeff I saw your wife driving your car. I thought she would want the newer vehicle.
I don't have that problem with the place I go to in Norfolk. They only check for safety items. pm me if you need the info.
^^ Sweet. I'll hold on to the info for safe keeping til i get the car. Can't wait to start the building process and start meeting up with you guys. Sound like some very helpfull guys.
As for the Dyno, I'll see what they have available. I don't mind goind to Keenan's place, but we will be waiting quite a while it seems. I don't know when the next time they are going to do a Dyno Day is going to be, but I'll email DTP and ask and let you guys know.
Adrian- I changed my oil today haha MY first on this car since I bought it 4 years ago. My neighbor gave me some ramps and I was all excited to do it myself. Then I ran into the lowered car big ramp issue.
Now 8 years ago it wouldnt have been a issue with my integra that car was so light I just put bricks down and rolled on the bricks and then the ramp. Now the TL significantly heavier car I was a bit nervous. I sat there and thought about it for 10 mins no lie and then the sun came out and i said fuck it.
Well no probs at all the baby went up easy and I may have gotten a slight scuff on the bottom bumper but I thought o well Im going to put a lip eventually. Only issue was my tires were .5 inches too big but i didnt scrape my rims.
So im ready for dyno now
Mike- When I passed you the other day I realized that you still have my glasses :duh: You can see how dependent i am on those things. Im off this weekend so If its cool or your home id like to swing by.
Now 8 years ago it wouldnt have been a issue with my integra that car was so light I just put bricks down and rolled on the bricks and then the ramp. Now the TL significantly heavier car I was a bit nervous. I sat there and thought about it for 10 mins no lie and then the sun came out and i said fuck it.
Well no probs at all the baby went up easy and I may have gotten a slight scuff on the bottom bumper but I thought o well Im going to put a lip eventually. Only issue was my tires were .5 inches too big but i didnt scrape my rims.
So im ready for dyno now
Mike- When I passed you the other day I realized that you still have my glasses :duh: You can see how dependent i am on those things. Im off this weekend so If its cool or your home id like to swing by.
GUYS DON'T FORGET WE HAVE OUR ANNUAL MEMORIAL DAY CAR SHOW
AT THE PHILIPPINE CULTURAL CENTER MAY 25th (where we took home best team last year (amongst other trophies)
(details still to come)
PLUS A NEW SHOW ON JUNE 6th
I'm still not sure about skyline.. We have a lot going on around that time.
GUYS DON'T FORGET WE HAVE OUR ANNUAL MEMORIAL DAY CAR SHOW
AT THE PHILIPPINE CULTURAL CENTER MAY 25th (where we took home best team last year (amongst other trophies)
(details still to come)
GUYS DON'T FORGET WE HAVE OUR ANNUAL MEMORIAL DAY CAR SHOW
AT THE PHILIPPINE CULTURAL CENTER MAY 25th (where we took home best team last year (amongst other trophies)
(details still to come)
NEEEEEEEEEEEEEEEEEEEEEEEEEEEEEVVVVVVVVVVVVVVVEEEEE EEEEEERRRRRRRRRRRRRRRRR mind im a TARD!! that is Memorial Day gimme a break Im 13 hours into my 12 hour work shift.
^^Alright we'll let it slide this time.
Unfortunately, I won't be able to attend any event the end of May, beginning of June. We're getting married on May 23rd and our honeymoon to the Bahamas is the first week in June. Hope you guys have fun though...and take lots of pics. Who knows, maybe I can stop by the Memorial Day Car show if I get permission.
Unfortunately, I won't be able to attend any event the end of May, beginning of June. We're getting married on May 23rd and our honeymoon to the Bahamas is the first week in June. Hope you guys have fun though...and take lots of pics. Who knows, maybe I can stop by the Memorial Day Car show if I get permission.
Wish I could go!!! Not to sure if my 96' Grand Am will look good there though!! HA!!
On another note!! Yea!!! I'm finally a full fledge member and can do PM's. Felt like I was an outsider for so long...guess I still am since I haven't even gotten the car yet.....sniff...sniff. Soon.....Soon
On another note!! Yea!!! I'm finally a full fledge member and can do PM's. Felt like I was an outsider for so long...guess I still am since I haven't even gotten the car yet.....sniff...sniff. Soon.....Soon
^^Alright we'll let it slide this time.
Unfortunately, I won't be able to attend any event the end of May, beginning of June. We're getting married on May 23rd and our honeymoon to the Bahamas is the first week in June. Hope you guys have fun though...and take lots of pics. Who knows, maybe I can stop by the Memorial Day Car show if I get permission.
Unfortunately, I won't be able to attend any event the end of May, beginning of June. We're getting married on May 23rd and our honeymoon to the Bahamas is the first week in June. Hope you guys have fun though...and take lots of pics. Who knows, maybe I can stop by the Memorial Day Car show if I get permission.
Wish I could go!!! Not to sure if my 96' Grand Am will look good there though!! HA!!
On another note!! Yea!!! I'm finally a full fledge member and can do PM's. Felt like I was an outsider for so long...guess I still am since I haven't even gotten the car yet.....sniff...sniff. Soon.....Soon
On another note!! Yea!!! I'm finally a full fledge member and can do PM's. Felt like I was an outsider for so long...guess I still am since I haven't even gotten the car yet.....sniff...sniff. Soon.....Soon
What kind of suspension you're getting? I got the top hat that Tein coilovers offered.




