Went back in time....
#162
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
Well, my brother-in-law and I finally finished the install today. He's finally done with school and was able to lend me the extra set of hands I needed. Damn was it tiring. Ran into a few minor hiccups but got through them and finished the install and took it for a test drive.
The car feels like the front is severly lifting off the ground as if I'm losing traction. It could be the car needs and alignment or that the tires need to be worn in a little or both.
There is one major issue, or at least I think it is. My brother-in-law wasn't as worried as I am. Basically the entire left side of the car is sitting lower than the right side. There is an extra finger gap between teh tire and fenderwell on the right than the left. My brother-in-law says the springs shocks need to settle some and it may correct itself. Is there something else that you guys can think of that could be causing this problem? I'm gonna make an appt for this friday to get the car aligned, so we'll see how much that improves these issues.
![](https://img504.imageshack.us/img504/9192/imgp2139x1600x1200ve9.th.jpg)
The car feels like the front is severly lifting off the ground as if I'm losing traction. It could be the car needs and alignment or that the tires need to be worn in a little or both.
There is one major issue, or at least I think it is. My brother-in-law wasn't as worried as I am. Basically the entire left side of the car is sitting lower than the right side. There is an extra finger gap between teh tire and fenderwell on the right than the left. My brother-in-law says the springs shocks need to settle some and it may correct itself. Is there something else that you guys can think of that could be causing this problem? I'm gonna make an appt for this friday to get the car aligned, so we'll see how much that improves these issues.
![](https://img504.imageshack.us/img504/9192/imgp2139x1600x1200ve9.th.jpg)
![](https://img515.imageshack.us/img515/5884/imgp21471600x1200ez3.th.jpg)
#163
Suzuka Master
^Nice.
Kthxbye now get back to the Audi.
Kthxbye now get back to the Audi.
![:O](https://acurazine.com/forums/images/smilies/embarrassment.gif)
#167
The sizzle in the Steak
Are those 16's ?
#168
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
Originally Posted by Moog-Type-S
Are those 16's ?
#172
The sizzle in the Steak
Originally Posted by Sly Raskal
17's. Even at 17" they look small because of the length of the spokes. But I'm happy with the way they look, and for a 17" wheel they are pretty light.
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
#173
Very nice. I would wait for the springs to settle before you get an alignment. It may take a week or two until they settle, after which your car should be slightly lower.
#174
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
Damnit! Just noticed the lip on my rim is fuxored (just a small about, maybe slightly larger than quarter inch) and a chunk of tire is missing where the scuff occured.
I don't remember ever hitting anything.
The rims have only been on for a month and already a bad scuff.
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
F&@)$&* LA Freeways and roads!!!!
I don't remember ever hitting anything.
The rims have only been on for a month and already a bad scuff.
![Annoyed](https://acurazine.com/forums/images/smilies/annoyed.gif)
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
F&@)$&* LA Freeways and roads!!!!
#175
The sizzle in the Steak
Originally Posted by Sly Raskal
Damnit! Just noticed the lip on my rim is fuxored (just a small about, maybe slightly larger than quarter inch) and a chunk of tire is missing where the scuff occured.
I don't remember ever hitting anything.
The rims have only been on for a month and already a bad scuff.
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
F&@)$&* LA Freeways and roads!!!!
I don't remember ever hitting anything.
The rims have only been on for a month and already a bad scuff.
![Annoyed](https://acurazine.com/forums/images/smilies/annoyed.gif)
![Mad](https://acurazine.com/forums/images/smilies/mad.gif)
F&@)$&* LA Freeways and roads!!!!
#176
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
Originally Posted by Moog-Type-S
:ibtehwifeydiditandidnottellyou:
Whereas my wife, not that she doesn't care, brushes it off, knowing that it can be fixed or remedied. I get pissed because it shouldnt' have happened in the first place.
In this case, I can't blame the wifey. I haven't taught her how to drive stick [yet].
#178
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
Thought I'd give an update as to what's going on with the Teg. Here's a post I just made over at team-integra.net...
(Bold text are links)
(Bold text are links)
Hey guys,
I know I don't know very many of you, haven't even met anyone yet but I thought I'd share the little progress and pitfalls I've come across since picking up my 2nd teg at the start of last year.
Well since having the 105K Service done I had my clutch replaced and went with the Type-R flywheel. In addition I had my brake lines and clutch lines replaced with a SS set. I should have held off on the brake lines and done them later but oh well.
Shortly after that I had an incident on the freeway with a 4" x 4", 5' long piece of lumbar laying in the middle of the freeway. You could say I was very pissed at that, and the idiot driver in front of me, and at myself.
Out of that incident I upgraded my suspension with a set of Koni Yellows (neuspeed version) and Neuspeed sport springs and replaced the shock bushings with polyurethane bushings. In addition, I had to replace my wheels and tires so I went with a set of 17" Enkei RPF1s wrapped with Yokohama S.Drive 205/40 tires.
After all of this, I had an alignment done and naturally both front wheels and the right rear had serious camber issues, but I didn't want to do the camber kit just yet. So i held off on that.
Fast forward a few months to October and big problems start. one day on my way home I downshifted, hit 5K and my engine cut and the check engine light lit up. UH OH! I get home, read the code, and it was something with the VTEC solenoid. Did a little more research, checked my oil level and I was down 2qts! What scared me was that I just had an oil change 1K miles ago!!! Took it into the shop, and sure enough the motor needed to be rebuilt.
One month later (November), I get my car back and am completely stoked! Driving like a dream now!
I just got my first oil change done this past week after having the motor rebuilt. Using Motul 8100 motor oil. Also had a brake service done for the front and rear. Went with Brembo Blanks, Hawk HPS Brake pads, and Motul RBF600 brake fluid. Purchased an ingalls camber kit for the front and rear (polyurethane version) and had that installed along with new trailing arm bushings and an alignment. Now that the alignment is correct, the car is sitting much more level. The left side isn't sitting drastically lower than the right as before. There is about a one finger gap between the tire and fender with the driver side a hair lower.
I thought the car was running great after the motor rebuild, it's running even better now (or at least it feels that way to me). It pulls great, and the steering and engine response is noticeably better. The camber kit makes a bit of a noise, but it doesn't bother me. My last integra did the same and i got used to it.
Next up:
Anyway, that's all, thanks for reading and I'll try to post up some new pics soon.
I know I don't know very many of you, haven't even met anyone yet but I thought I'd share the little progress and pitfalls I've come across since picking up my 2nd teg at the start of last year.
Well since having the 105K Service done I had my clutch replaced and went with the Type-R flywheel. In addition I had my brake lines and clutch lines replaced with a SS set. I should have held off on the brake lines and done them later but oh well.
Shortly after that I had an incident on the freeway with a 4" x 4", 5' long piece of lumbar laying in the middle of the freeway. You could say I was very pissed at that, and the idiot driver in front of me, and at myself.
Out of that incident I upgraded my suspension with a set of Koni Yellows (neuspeed version) and Neuspeed sport springs and replaced the shock bushings with polyurethane bushings. In addition, I had to replace my wheels and tires so I went with a set of 17" Enkei RPF1s wrapped with Yokohama S.Drive 205/40 tires.
After all of this, I had an alignment done and naturally both front wheels and the right rear had serious camber issues, but I didn't want to do the camber kit just yet. So i held off on that.
Fast forward a few months to October and big problems start. one day on my way home I downshifted, hit 5K and my engine cut and the check engine light lit up. UH OH! I get home, read the code, and it was something with the VTEC solenoid. Did a little more research, checked my oil level and I was down 2qts! What scared me was that I just had an oil change 1K miles ago!!! Took it into the shop, and sure enough the motor needed to be rebuilt.
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
I just got my first oil change done this past week after having the motor rebuilt. Using Motul 8100 motor oil. Also had a brake service done for the front and rear. Went with Brembo Blanks, Hawk HPS Brake pads, and Motul RBF600 brake fluid. Purchased an ingalls camber kit for the front and rear (polyurethane version) and had that installed along with new trailing arm bushings and an alignment. Now that the alignment is correct, the car is sitting much more level. The left side isn't sitting drastically lower than the right as before. There is about a one finger gap between the tire and fender with the driver side a hair lower.
I thought the car was running great after the motor rebuild, it's running even better now (or at least it feels that way to me). It pulls great, and the steering and engine response is noticeably better. The camber kit makes a bit of a noise, but it doesn't bother me. My last integra did the same and i got used to it.
Next up:
Polyurethane motor mount inserts.
Install '97 model style amber taillights
Remove old tint
Install Enkei Wheel lugs
Full Detail
I want to start tackling doing some bolt-on engine mods but I'm saving up my money and will decide later this year if I'm gonna dump more mods into my Integra or my Avant. I'm leaning more towards the Avant but we'll see.Install '97 model style amber taillights
Remove old tint
Install Enkei Wheel lugs
Full Detail
Anyway, that's all, thanks for reading and I'll try to post up some new pics soon.
#179
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts
Fun car, thats why I got the Prelude. Cheap reliable fun, back when you could see out of a car
Nice update too, sorry to hear about the engine trouble though.
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
Nice update too, sorry to hear about the engine trouble though.
#180
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
Also, regarding the motor rebuild, I went a slightly expensive route. I ended up ordering a brand new block straight from Japan. in fact, it was the very last one in the world from what the service guys told me. They had a hard time locating it. I wanted to do this because guess what, now I have a b18 block sitting in my garage that I can get redone, and build up a nice race motor over the next few years (I HOPE) and drop into the car when it does give and turn it into a nice track car.
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
#181
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
Oh and one more thing, I'm kinda regretting getting the 17" Enkei's. I'm thinking about selling them, and getting the 15" version since each 15" wheel is 5lbs lighter than the 17". Not that the 17" wheel is that heavy, it comes in at 14.6 lbs which is damn light for a 17" wheel. I gotta give it some serious thought though (again).
#182
Oderint dum metuant.
Join Date: Mar 2005
Location: Lake Wylie
Age: 46
Posts: 12,496
Likes: 0
Received 534 Likes
on
446 Posts
Thanks for the update. Sucks about all of the issues you had. Good to see you stuck with it and are now able to really enjoy the car as I'm sure you thought you would when you bought it.
#184
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts
Yeah my fiancee gripes about my Prelude a lot..
#185
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
One time my wife said she Didn't like the interior of my car and that it's old and crappy. Mind you, the interior on my car is in VERY good condition, even better than her 2001 Sentra. Let's just say I had to contain myself after that comment.
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
#186
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts
![rofl](https://acurazine.com/forums/images/smilies/rofl.gif)
Tell her to do the "knock" test, gotta love those hard plastics on those Sentras
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
#187
Team Owner
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Fontana, California
Age: 47
Posts: 30,991
Received 582 Likes
on
346 Posts
oh man, the plastic in her Sentra is hideous! What's worse is when we drive someone, you have zero grip on the steering wheel because it's practically the same material. lol I feel like I have to hold on for dear life when I drive her car.
#188
The sizzle in the Steak
Oh and one more thing, I'm kinda regretting getting the 17" Enkei's. I'm thinking about selling them, and getting the 15" version since each 15" wheel is 5lbs lighter than the 17". Not that the 17" wheel is that heavy, it comes in at 14.6 lbs which is damn light for a 17" wheel. I gotta give it some serious thought though (again).
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
#189
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts
Also check out the seat fabrics. FAR FAR better in the Integra.
#190
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
Thats why i don't bother upgrading the Prelude wheels (in addition to attracting thieves)
All you end up doing is goofing up the suspension settings and reducing your gas mileage and acceleration.
#191
Thanks for the update... sucks about the problems though. and Koni Yellows are ![Gold Cup](https://acurazine.com/forums/images/smilies/goldcup.gif)
heh, chicks complain about my car all the time. just bury the throttle, either they'll scream or shut up completely, either way they're not complaining
![Gold Cup](https://acurazine.com/forums/images/smilies/goldcup.gif)
heh, chicks complain about my car all the time. just bury the throttle, either they'll scream or shut up completely, either way they're not complaining
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
#192
Oderint dum metuant.
Join Date: Mar 2005
Location: Lake Wylie
Age: 46
Posts: 12,496
Likes: 0
Received 534 Likes
on
446 Posts
I can't imagine too many wives liking that situation. Not only are you lucky to have a car you truly enjoy, but you are have a wife who appreciates that and lets you enjoy. Make sure you take her somewhere nice every now and then.
#193
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts
My fiancee wants an original Mini.. and wants it to be "our" project to restore such a thing. I guess thats a start..
#195
eh, as long as you get the correct offset to compensate for the difference in size, you may actually get a benefit in acceleration and handling, if the wheels are lighter than the OEMs and allow for the fitment of wider tires. One thing's for sure though, and especially when it comes to older Hondas.... theft goes up exponentially with appearance mods.
#196
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts
![Werd](https://acurazine.com/forums/images/smilies/werd.gif)
Prelude is STOCK on the outside. I keep it clean but I don't baby the exterior, don't want too much attention.
I'd advise the same for the Integra quite emphatically.
#197
The sizzle in the Steak
#198
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts
#200
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,640
Received 2,329 Likes
on
1,309 Posts